Cartos failing with BWB

[Ignitor]

Hey guys and gals I'm having a problem with some BWB menthol and blueberry.Cannot get these juices to work in some dual coil cartomizers.Carts are working with other vendor juices so I know its not the cartos.Barely get any vapor and carto runs so hot.Any solution to this?

 

[BCman]

Might be too thick?
Try thinning with 5-10% distilled water.

 

[wood]

some of bwbs juices are to high in vg so thick
i find i cant use my malty in a carto

 

[Illuminatu]

I had the same issues with all my carto's, so for my BWB juices I now use some atomizer's i get from BWB aswell there affordable and they work real well with Don's e-liquid

 

[DevilFishPhil]

Aren't BWB juices 70%PG-30%VG? I've used some 50-50 juices in DC cartos with no issues at all.

 

[Illuminatu]

I personally don't think its because of the PG/VG ratio, as I even tried adding PG to my BWB juice to thin it, and it still gunked and screwed up my carto's in a matter of a few hours or at most 2 days. I read on the BWB forums that allot of ppl had problems with carto's not wicking well with those juices. Maybe its some sediments or who know's what ?

 

[the_vape_nerd]

If I were you, I'd do myself a favor and get a pack of ce3s. These are relatively easy to deal with and have worked on all the bwb juices I have tried. MVS has them for 10.50 and a delrin drip tip is included, which is an increbile value if you ask me. BWB juice + ce3= vaping nirvanna.

 

[Illuminatu]

If Ce3's are clearomizers, there's 2 thing i don't like about them personally ... need a syringe to refill, they are leaky if you don't keep'em straight up ! Oh and they kinda defeat the purpose to use my bottom feeder My Reo's with an 1.7ohm atty are quite delightful for taste. I'm guessing that on regular ecig or tube mod tho they might be more insightful.

I still use Boge carto's for other juices than the BWB's and i dont have issues with them.

 

[wood]

my bloog cartos work well with my bwb juices except malty the other ones do pretty good but i still prefer an atty , i just hate dripping but nothing beats it

 

[DevilFishPhil]

Agreed, dripping is definitely the best choice for flavor/vapor/consistency - and aside from when I'm driving there aren't too many situations I find myself not being able to pop off the DT to drip.

 

[the_vape_nerd]

There's a very small amount of leaking with ce3s. You have to mop the top about twice per refill but I never get any juice in my mouth.

 

[tiffytiff]

If I were you, I'd do myself a favor and get a pack of ce3s. These are relatively easy to deal with and have worked on all the bwb juices I have tried. MVS has them for 10.50 and a delrin drip tip is included, which is an increbile value if you ask me. BWB juice + ce3= vaping nirvanna.

lmao ....hi glad to see your still loving them!

 

[tiffytiff]

btw, i've only had 1 defective ce3 where i filled and the juice just ran out of the bottom...dunno what that was all about, but i still swear by em

 

[the_vape_nerd]

Tiff i am SO GLAD you turned me onto these. They rawk. The first one I filled for that review is still going strong after about 10 refills. Say what type of pv to you use, I've got a question for you.

 

[tiffytiff]

i started out with a silver bullet using these....but then i sold i switched to a provari lahove it and i still use an ego 1000mah sometimes too....so ive used it on all 3 why whats up?

 

[Not Iris]

I'm thinking I'm going to have to order that ProVari instead of waiting for Santa, because I can't wait! Need it NOW!!

 

[the_vape_nerd]

i started out with a silver bullet using these....but then i sold i switched to a provari lahove it and i still use an ego 1000mah sometimes too....so ive used it on all 3 why whats up?

Well I've got an e-power that I'm using them on. This is an eGo sorta knock off I guess. In any case, my new love of the ce3 prevents me from using the cone. Do you know if either the eGo folks, the e-power people, or a 3rd party vendor has yet come up with a cone solution? I think the new Ce2s are also too fat for the cone to fit over.

 

[BCman]

I'm using the ce2's on both my 18650 and 14650 epowers with cones.
I did however drill a small hole on the side on the cone for the 14650 as it needed more air for a easier draw.
And removing the small rubber tip and replaced it with a Boge soft cap which also improved the draw.

 

[tiffytiff]

Well I've got an e-power that I'm using them on. This is an eGo sorta knock off I guess. In any case, my new love of the ce3 prevents me from using the cone. Do you know if either the eGo folks, the e-power people, or a 3rd party vendor has yet come up with a cone solution? I think the new Ce2s are also too fat for the cone to fit over.

i have heard of people drilling out the hole on the cones just a little so they can fit the cone over the ce3....BUT FOR GOD SAKES BE CAREFUL! i actually just got some cones today, gonna have my hubby make it work for me he doesn't know this yet.....but he will very soon

 

[JollyRogers]

Hmm. I have noticed a lot of sediment and discoloration in my UFS with BWB liquids, using a brand new 510 (two of them now). I have vaped about 40ml of the flavors I have on hand. It's pretty bad IMO (the sediment). However, I have a ton of CE2s laying around in boxes and used my BWB with one yesterday. It definitely is a nice vape. I don't like the CE2 (Clearomizers) due to durability though. Maybe I will try a pack of CE3s... I also have dripped with BWB since getting what I got, and that is just fine. I really enjoy the flavors from BWB, but it doing what it is doing in my UFS is a no go, as that is what I vape 90% of the time.