Catfish Atty Mods the next Chapter

[penguiness]

Corrected list, in the order they posted:

Derringer Caps, new style $23 each or $20 with derringer at $60
Black delrin
1. rudedog
2. Nautilusfan
3. kingdal
4. Yiorgo
5. yinsen
6. Beez0527
7. Alawot
8.

White Delrin
1. rudedog
2. Asbestos4004
3. yinsen
4.
5.

Brass
1. penguiness
2. kkiet
3. YePsTeR
4. NatGasMan
5. B2L
6. Mommabird62

SS
1. Asbestos4004
2. kkiet
3. Yiorgo
4.
5.

Copper
1.
2.
3.

Derringers Bottom Fed $60.00
1. Kingdal
2. kkiet (2)
3. mommabird62


I also have complete derringers bottom fed, and knurled to stop the spins. On sale for $60 each.
The retail price on the caps is $25 I'll go $23 separately or $20 with a derringer. Fair enough?

 

[bullhcr]

Vape mail today. Pretty impressed with the Necro(short for Nectar Micro ). Slapped on a 2 mm parallel 30g micro coil and it's been a long time since I have had such a pleasant vape from a 1.0 Ohm setup. Maybe I even go higher on the next build. Air flow is just right, a non restrictive mouth to lung.

Any suggestions on drip tip? Ideally a delrin one in the same blue as the juice well.

 

[penguiness]

Vape mail today. Pretty impressed with the Necro(short for Nectar Micro ). Slapped on a 2 mm parallel 30g micro coil and it's been a long time since I have had such a pleasant vape from a 1.0 Ohm setup. Maybe I even go higher on the next build. Air flow is just right, a non restrictive mouth to lung.

Any suggestions on drip tip? Ideally a delrin one in the same blue as the juice well.

Blue Larimar .. tt962 - Drip Tip Designz

 

[RobbieVape]

Nectar Micro received here today as well Tom. Stellar conversion once again. Not sure I'll get around to building for a day or two as family has just returned from vacation. Any pictures and suggested build that works would be appreciated. Thanks again Tom


Sent from my iPhone using Tapatalk

 

[BENTHOS]

Derringer Caps, new style $23 each or $20 with derringer at $60
Black delrin
1. rudedog
2. Nautilusfan
3. kingdal
4. Yiorgo
5. yinsen
6. Beez0527
7. Alawot
8. BENTHOS
9.

White Delrin
1. rudedog
2. Asbestos4004
3. yinsen
4.
5.

Brass
1. penguiness
2. kkiet
3. YePsTeR
4. NatGasMan
5. B2L
6. Mommabird62

SS
1. Asbestos4004
2. kkiet
3. Yiorgo
4.
5.

Copper
1.
2.
3.

Derringers Bottom Fed $60.00
1. Kingdal
2. kkiet (2)
3. mommabird62
4. BENTHOS


I also have complete derringers bottom fed, and knurled to stop the spins. On sale for $60 each.
The retail price on the caps is $25 I'll go $23 separately or $20 with a derringer. Fair enough?

 

[Sloth Tonight]

My best nectar build so far is an 8wrap 2.5mm 26g, right around 1.08 ohms. I am highly highly impressed with the atty. The flavor is awesome. The airflow is good imo. I'll definitely keep one of the 2 nectar but there are 3 downsides to it for me so far. One is the fact that all my tips look silly (and I'm hard to please with tips, struggling to find any non-wode bore I like - waiting on low country to do a few, really). That's negligible overall. The other is how hot it gets - I know people say that from time to time about attys, the derringer got that a lot - never felt it was an issue til this little guy (I know I could do a twisted 30 or something to keep it cooler but honestly I'm about done with twisted wire, overall I just don't like it). Another is its wicking ability, which seems sluggish to me, and, although I can learn to squonk every 2 hits, it will be a long and dry process

But the flavor is a monster. The pimp cup shakes in the presence of a nectar. Equal or better flavor and an amazing build deck

 

[RobbieVape]

You have any pictures of coil placement. Assuming the wick going through the two holes. I also use Rayon as I find it wicks quicker/easier, have you tried this?

Red drip tip I know Amberpoint do a drip tip which appears to match called the original "AP" drip tip. Thanks sloth for info, if you get chance a pic would be appreciated




Sent from my iPhone using Tapatalk

 

[RiverNut]

My best nectar build so far is an 8wrap 2.5mm 26g, right around 1.08 ohms. I am highly highly impressed with the atty. The flavor is awesome. The airflow is good imo. I'll definitely keep one of the 2 nectar but there are 3 downsides to it for me so far. One is the fact that all my tips look silly (and I'm hard to please with tips, struggling to find any non-wode bore I like - waiting on low country to do a few, really). That's negligible overall. The other is how hot it gets - I know people say that from time to time about attys, the derringer got that a lot - never felt it was an issue til this little guy (I know I could do a twisted 30 or something to keep it cooler but honestly I'm about done with twisted wire, overall I just don't like it). Another is its wicking ability, which seems sluggish to me, and, although I can learn to squonk every 2 hits, it will be a long and dry process

But the flavor is a monster. The pimp cup shakes in the presence of a nectar. Equal or better flavor and an amazing build deck

sloth, try 28g on 2mm and rayon. Keep the ends of your wick just at the bottom of tank below and no longer.
Curious about the heat. Mine doesn't get hot at all (I don't really chain vape though so...)

 

[Sloth Tonight]

sloth, try 28g on 2mm and rayon. Keep the ends of your wick just at the bottom of tank below and no longer.
Curious about the heat. Mine doesn't get hot at all (I don't really chain vape though so...)

I did 28g 2mm and didn't like it as much. Rayon is out of the question for me I'm afraid, I'm a KGD only dude for life

I chain vape like a sloth in heat, just a frantic kinda dude. Somewhat at odds with a sloths true nature but I've always been a revolutionary sloth...

 

[RiverNut]

You have any pictures of coil placement. Assuming the wick going through the two holes. I also use Rayon as I find it wicks quicker/easier, have you tried this?

Red drip tip I know Amberpoint do a drip tip which appears to match called the original "AP" drip tip. Thanks sloth for info, if you get chance a pic would be appreciated




Sent from my iPhone using Tapatalk

Robbie, this atty is a no brainer (I think that's partly why I like it lol). Coil goes directly above the air. I haven't messed with it, but you can probably adjust it up or down a little for some variance in throat hit. There are three holes. One is for filling (as a dripper), the two inline with the air holes are the ones your wick goes into.

 

[RiverNut]

I did 28g 2mm and didn't like it as much. Rayon is out of the question for me I'm afraid, I'm a KGD only dude for life

I chain vape like a sloth in heat, just a frantic kinda dude. Somewhat at odds with a sloths true nature but I've always been a revolutionary sloth...

you're a nut!

 

[Sloth Tonight]

You have any pictures of coil placement. Assuming the wick going through the two holes. I also use Rayon as I find it wicks quicker/easier, have you tried this?

Red drip tip I know Amberpoint do a drip tip which appears to match called the original "AP" drip tip. Thanks sloth for info, if you get chance a pic would be appreciated




Sent from my iPhone using Tapatalk

Eta excuse the mess, I over squonker

 

[Sloth Tonight]

you're a nut!

Hazel...I drink enough of it to become one with it

 

[RiverNut]

lmao! One day I've got to try it. I've been buying the store bought almond for a couple of years now.
And I do love hazel nuts.

 

[Sloth Tonight]

lmao! One day I've got to try it. I've been buying the store bought almond for a couple of years now.
And I do love hazel nuts.

Yeah? I'm telling you dude, it is unbelievable. I did store bought vanilla almond milk for my coffee for years - and I think if you make your own hazelnut or almond milk you'll be ecstatic over the difference it makes. Almost like vaping a protank with stock coils then blasting a CAM atty - ya never look back

My breakfast each morning is: 1 cup hazelnut milk, 1 or 2 carrots, 2 bananas, 1 tbsp Chia seeds, and 1 or 2 tbsp shredded coconut - blended all together - along side a cup of Peruvian coffee with hazelnut milk as creamer. And Wakonda in a CAManta.

 

[goofy2302]

cleaned up my mess

 

[goofy2302]

Oh boy i guess tapatalk doesnt copy the list well.
Can someone pls put me in for a black delrin cap pls
Thanks

Sent from my SM-N900T using Tapatalk

 

[Thomas Mitchell]

Derringer Caps, new style $23 each or $20 with derringer at $60
Black delrin
1. rudedog
2. Nautilusfan
3. kingdal
4. Yiorgo
5. yinsen
6. Beez0527
7. Alawot
8. BENTHOS
9. Goofy2302

White Delrin
1. rudedog
2. Asbestos4004
3. yinsen
4.
5.

Brass
1. penguiness
2. kkiet
3. YePsTeR
4. NatGasMan
5. B2L
6. Mommabird62

SS
1. Asbestos4004
2. kkiet
3. Yiorgo
4.
5.

Copper
1.
2.
3.

Derringers Bottom Fed $60.00
1. Kingdal
2. kkiet (2)
3. mommabird62
4. BENTHOS


I also have complete derringers bottom fed, and knurled to stop the spins. On sale for $60 each.
The retail price on the caps is $25 I'll go $23 separately or $20 with a derringer. Fair enough?



Sent from my SM-G900V using Tapatalk

 

[McPuff]

does anyone know where the current cam m list is?

 

[jeffreyace]

does anyone know where the current cam m list is?

Speaking of cam-m