Catfish Atty Mods the next Chapter

[super_X_drifter]

I think ya'll would be surprised at the vape a freakin 1.05 - yes one point zero 5 ohm straight wire 26 ga 2.4mm ID full contact coil build centered between the posts produces in the Stumpola. I know I am. Imagine all day on one battery and 5 ml . This could be the best atty ever made.

Seriously - no counting winds, is this coil the same number of winds, are they equidistant from the posts - all that shiyut that accompanies dual coils is gone. GONE. And with a gain in production

life V1.2 has begun.

Life is good.

 

[RobbieVape]

I used the same sort of build in my nuppin with great results. Didn't see any change really to the flavour but battery life as you suggest was a big plus!


Sent from my iPhone using Tapatalk

 

[beez0527]

Got mine yesterday love it make vapin on the vector even better now no hot lips.

 

[Asbestos4004]

Who has a stumpy and would rather have a Vector?

2 Stumpys is not enough.

 

[rudedog]

well the caps look great im still waiting on mine.cant wait to get the cap so I can do my trade with mark!

Step 1: Get a Vector from Tom (Chowderhead)
Step 2: Get a Vector top cap from Tom (Tbev)
Step 3: ???
Step 4: Profit.

 

[super_X_drifter]

Who has a stumpy and would rather have a Vector?

2 Stumpys is not enough.

I'll up ya one: who has a stumpy and would like 2 vectors with the delrin top caps and the stock top caps and only unflavored nic base run thru em so they will be exactly like brand new

 

[Asbestos4004]

I'll up ya one: who has a stumpy and would like 2 vectors with the delrin top caps and the stock top caps and only unflavored nic base run thru em so they will be exactly like brand new

Hahàhaaaa! I was gonna add money! And mine come permanently embedded with Vanilla Custard!
Tom drilled out my Aeolus's for me. He said his whole shop smelled like a dumpster behind an ice cream parlor. Hahàhaaaa....dude cracks me up.

 

[Papa_Lazarou]

Tom drilled out my Aeolus's for me.

Is that a body piercing thing?

 

[Asbestos4004]

Is that a body piercing thing?

He said "you're going to feel a little ....."

Edit....really? Doctors say it all the time! It rhymes with brick.

 

[Sloth Tonight]

My love of Mantas is simultaneously growing and coming to a halt...

It's the o rings in the top cap. They're beginning to shred. Those o rings are scaring me. Never had this happen with an atty before O.O'

 

[inswva]

I'll up ya one: who has a stumpy and would like 2 vectors with the delrin top caps and the stock top caps and only unflavored nic base run thru em so they will be exactly like brand new

And now they are in the classies, lol. I'm right there with you brother.

I'm officially declaring the Stumpy as the GAOAT, taking the top spot from my beloved Derringers.

 

[Rule62]

My love of Mantas is simultaneously growing and coming to a halt...

It's the o rings in the top cap. They're beginning to shred. Those o rings are scaring me. Never had this happen with an atty before O.O'

I've removed the lower o ring on all of mine. I'm not getting any leakage when running with just the upper ring; plus, removing and replacing the top cap is much easier.

 

[RobbieVape]

My love of Mantas is simultaneously growing and coming to a halt...

It's the o rings in the top cap. They're beginning to shred. Those o rings are scaring me. Never had this happen with an atty before O.O'

I bought 20 extra o-rings on my first clone, not expensive and not had to replace since, what I do now is apply a little VG liquid around the o-rings, just makes the cap slide on and off a little easier stopping that friction that tears them up

Edit: I can look what size I ordered if you want, I'm wondering if a slightly different size would help too

Found them:

Picture doesn't show size, supplier does 1-27mm obviously don't order 27mm [emoji23][emoji23][emoji23]


Sent from my iPhone using Tapatalk

 

[Rule62]

I bought 20 extra o-rings on my first clone, not expensive and not had to replace since, what I do now is apply a little VG liquid around the o-rings, just makes the cap slide on and off a little easier stopping that friction that tears them up

Edit: I can look what size I ordered if you want, I'm wondering if a slightly different size would help too

Found them:

View attachment 469496


Sent from my iPhone using Tapatalk

I do that with any atty, especially when it's new. I use a q tip and a little juice, and run it around the o rings, before assembling.

 

[Rule62]

I bought 20 extra o-rings on my first clone, not expensive and not had to replace since, what I do now is apply a little VG liquid around the o-rings, just makes the cap slide on and off a little easier stopping that friction that tears them up

Edit: I can look what size I ordered if you want, I'm wondering if a slightly different size would help too

Found them:

View attachment 469496


Sent from my iPhone using Tapatalk

Hmmm...actually, I believe they are 1mm x 21mm OD (19mmID), not 27.

 

[distortoblotto]

Hmmm...actually, I believe they are 1mm x 21mm OD (19mmID), not 27.

Being that the inside diameter of the cap measures out to 19.0 mm on the calipers and the outside diameter of the deck measures to 18.88, I'd have to say you are right.

 

[distortoblotto]

I bought 20 extra o-rings on my first clone, not expensive and not had to replace since, what I do now is apply a little VG liquid around the o-rings, just makes the cap slide on and off a little easier stopping that friction that tears them up

Edit: I can look what size I ordered if you want, I'm wondering if a slightly different size would help too

Found them:

View attachment 469496


Sent from my iPhone using Tapatalk

Robbieblood, have you tried to fit one of these to the cap? 7mm seems to be quite a discrepancy even though it is "outside" diameter.

 

[dhaiken]

Anyone who has O-Rings should have some Keg Lube.

 

[RobbieVape]

Hmmm...actually, I believe they are 1mm x 21mm OD (19mmID), not 27.

You are correct, posted the link quickly before sitting down to eat, that supplier does 1-27mm o-rings, the order wasn't for 27mm obviously [emoji6]



Sent from my iPhone using Tapatalk

 

[RobbieVape]

Robbieblood, have you tried to fit one of these to the cap? 7mm seems to be quite a discrepancy even though it is "outside" diameter.

The supplier carries 1-27mm didn't noticed it didn't show size I ordered. 27mm ain't gonna fit


Sent from my iPhone using Tapatalk