Catfish Atty Mods the next Chapter
- Thread starter Chowderhead1972
- Start date
- th_trl_thread_readers 0
-
- Tags
- bottom feeder
- Status
If you are looking for a tiny E8 type mod the dna200 isn't for you. The dual 18650 would be 11mm wider than the current version with 133w. Honestly I have no interest in working with 18650s I have dealt with extreme sag long enough. Imo lipo is superior in every way. Charges faster, almost no sag, lighter, no cheesy contact springs. The 200 was built from the ground up to be used with lipo it just plain works. I realize the dna200 isn't for every one but I have figured out if I love it so will others and sir; I love me some dna200 squonking, I'm hoping others will as well. I had actually hoped Sunbox would have actually made an effort to do a dna200 squonker but no luck.
CHEAPERDNA 200 Cam-LBC (little bit cheaper)
1. houndb
2. distortoblotto
3. jazzvaper
4. EZinTN
5. Strongdad
6. inspects
7. Nautilusfan
8. TheDigital99
9. TheKiwi
10. calpis
11. bottomfeeder
12. rudedog
13. YePsTeR
14. Beez0527
15. Asbestos4004
16. Kingdal
17. NNatGasMan
18. jhhollier
19. goofy2302
20.4nic8
21. BENTHOS
22. pwheeler
23. mcpuff
24. Papa_Lazaro
25. Wolfenstark
26. havok333
27. Mr.Mann
28. Yiorgo
29. laurie9300
30. Magnetnerd
31. Plumeguy
32. Fishwater
1. houndb
2. distortoblotto
3. jazzvaper
4. EZinTN
5. Strongdad
6. inspects
7. Nautilusfan
8. TheDigital99
9. TheKiwi
10. calpis
11. bottomfeeder
12. rudedog
13. YePsTeR
14. Beez0527
15. Asbestos4004
16. Kingdal
17. NNatGasMan
18. jhhollier
19. goofy2302
20.4nic8
21. BENTHOS
22. pwheeler
23. mcpuff
24. Papa_Lazaro
25. Wolfenstark
26. havok333
27. Mr.Mann
28. Yiorgo
29. laurie9300
30. Magnetnerd
31. Plumeguy
32. Fishwater
DNA200 LBC (Handmade version) milled or brushed aluminum your choice. Limit 10 pieces. $325
1. nautilus (brushed)
2. Asbestos
3. Goofy2302
4. Rudedog (milled look)
5. Beez0527 (brushed)
6. laurie9300
7. Calpis (milled)
8. TheDigital99 (brushed)
1. nautilus (brushed)
2. Asbestos
3. Goofy2302
4. Rudedog (milled look)
5. Beez0527 (brushed)
6. laurie9300
7. Calpis (milled)
8. TheDigital99 (brushed)
DNA200 LBC (Handmade version) milled or brushed aluminum your choice. Limit 10 pieces. $325
1. nautilus (brushed)
2. Asbestos
3. Goofy2302
4. Rudedog (milled look)
5. Beez0527 (brushed)
6. laurie9300
7. Calpis (milled)
8. TheDigital99 (brushed)
9. snakedoc (milled) s.n 8 if possible.
1. nautilus (brushed)
2. Asbestos
3. Goofy2302
4. Rudedog (milled look)
5. Beez0527 (brushed)
6. laurie9300
7. Calpis (milled)
8. TheDigital99 (brushed)
9. snakedoc (milled) s.n 8 if possible.
Whoops my bad brother I forgot...... LIPO'S !!! No I think the dna200 is for me for SURE.... UNLESS of course it has to be 2.5 inches wide to accommodate that and the lipo's. I think, for me comfortably holding a mod the limit is 2 inches in width....... Like I said the e7 is about as wide as I'd like to go....... SO if that's the case..... 2.5 inches wide?......I'm going to hold off.... take me off the list, due to the size nothing else.... Sorry brother Tom.
Sent from my SM-G920T using Tapatalk
Just no #14 or anything in the 40's right? I got you....
Tom your regulated mods sound great, but I'm wondering if you've given up on mechanicals all together. I very much like the CAM-M but what kept me from getting more is the fire button. When it works it hits better than anything I've tried, but honestly its requiring so much maintenance that its driving me crazy. I finally got some Deoxit today, tore everything down and gave it a good alcohol scrub, then hit all the key players with the D. Working like a champ again but I'm hoping this wont need to be a semi-weekly routine. The other thing that bugs a little is the need for a tool to access the bottle and batteries.
I would love to see you release your own version. Dual 18650, easy access door, and low/easy maintenance switch. Could you offer it for under $200? I bet you could, and I bet you would sell out faster than you could make them. No offense at all to the regulated crowd, but I'm sticking to mechanicals for the time being.
Can I start a list for the CAM-original-M? I'll take the one-off you produce until you send out for CNC work.
CAM-OG-M
1. hildicat!
I would love to see you release your own version. Dual 18650, easy access door, and low/easy maintenance switch. Could you offer it for under $200? I bet you could, and I bet you would sell out faster than you could make them. No offense at all to the regulated crowd, but I'm sticking to mechanicals for the time being.
Can I start a list for the CAM-original-M? I'll take the one-off you produce until you send out for CNC work.
CAM-OG-M
1. hildicat!
DNA200 LBC (Handmade version) milled or brushed aluminum your choice. Limit 10 pieces. $325
1. Nautilus (brushed)
2. Asbestos
3. Goofy2302
4. Rudedog (milled look)
5. Beez0527 (brushed)
6. laurie9300
7. Calpis (milled)
8. TheDigital99 (brushed)
9. snakedoc (milled) s.n 8 if possible.
10. Houndb
1. Nautilus (brushed)
2. Asbestos
3. Goofy2302
4. Rudedog (milled look)
5. Beez0527 (brushed)
6. laurie9300
7. Calpis (milled)
8. TheDigital99 (brushed)
9. snakedoc (milled) s.n 8 if possible.
10. Houndb
Perhaps Turbocaad has one for you. He made one for himself with the cells taken apart and got it down really small.
honestly if I was going to do a mech from scratch it would be a 2p lipo with a 8.5 bottle with a built in charger/ low volt alarm board built in. I'm all about that power...... Finding a switch that would stand up to 100 amps would be the hard part. I'll draw something up for you. I'm not much on mechs anymore but I would rock that. Might even start bending up welding rods for coils.
Last edited:
Charging board. As for 100A switches, it is unlikely given the easy availability of mosfets.
T
Hey Tom, what's the price on Derringers and Rogues?
Fortune favors the Bottom Feeders.
Fortune favors the Bottom Feeders.
Tom,
Not sure if you got my message from yesterday. Would it be cool to hold the solstice for me until the 27th or would you like me to take my name off the list? The last thing I want is to prevent anyone from buying one.
Not sure if you got my message from yesterday. Would it be cool to hold the solstice for me until the 27th or would you like me to take my name off the list? The last thing I want is to prevent anyone from buying one.
DNA200 LBC (Handmade version) milled or brushed aluminum your choice. Limit 10 pieces. $325
1. Nautilus (brushed)
2. Asbestos
3. Goofy2302 (brushed)
4. Rudedog (milled look)
5. Beez0527 (brushed)
6. laurie9300
7. Calpis (milled)
8. TheDigital99 (brushed)
9. snakedoc (milled) s.n 8 if possible.
10. Houndb
1. Nautilus (brushed)
2. Asbestos
3. Goofy2302 (brushed)
4. Rudedog (milled look)
5. Beez0527 (brushed)
6. laurie9300
7. Calpis (milled)
8. TheDigital99 (brushed)
9. snakedoc (milled) s.n 8 if possible.
10. Houndb
DNA200 LBC (Handmade version) milled or brushed aluminum your choice. Limit 10 pieces. $325
1. Nautilus (brushed)
2. Asbestos
3. Goofy2302 (brushed)
4. Rudedog (milled look)
5. Beez0527 (brushed)
6. laurie9300
7. Calpis (milled)
8. TheDigital99 (brushed)
9. snakedoc (milled) s.n 8 if possible.
10. Houndb
11. NatGasMan (brushed)
1. Nautilus (brushed)
2. Asbestos
3. Goofy2302 (brushed)
4. Rudedog (milled look)
5. Beez0527 (brushed)
6. laurie9300
7. Calpis (milled)
8. TheDigital99 (brushed)
9. snakedoc (milled) s.n 8 if possible.
10. Houndb
11. NatGasMan (brushed)
- Status
Similar threads
