Catfish Atty Mods the next Chapter

[havok333]

If a run of the 2 Puffs rda happens count me in.

Sent from my XT907 using Tapatalk

 

[Papa_Lazarou]

2puffs has just dropped a new top air atty... looks pretty cool. Comes with all the color AFC rings, chuff top, and 510 top cap.

2 Puffs 2P Atty RDA - Complete Set

Nice looking atty, and quite the accoutrements to go with it. Thanks for sourcing, brother (love that you do that for this crowd).

I'm actually a fan of 4-poster atties - makes for easy dual setups. Not as flexible as, say, a Stumpy, but makes dual coil center post leg trapping issues moot.

 

[Train2]

But, OOOPS, the LOGO is CUTOUT.
I like that it comes with 2 caps, one big-bore and one 510, but is the logo gonna leak?
That would cut into the benefit of the top air. Then again, it looks like very narrow slits, so maybe it's high-VG-leak-proof?

2puffs has just dropped a new top air atty... looks pretty cool. Comes with all the color AFC rings, chuff top, and 510 top cap.

2 Puffs 2P Atty RDA - Complete Set

{/QUOTE]

 

[inswva]

But, OOOPS, the LOGO is CUTOUT.
I like that it comes with 2 caps, one big-bore and one 510, but is the logo gonna leak?
That would cut into the benefit of the top air. Then again, it looks like very narrow slits, so maybe it's high-VG-leak-proof?

I guess the best way to make sure it won't leak would be to shut down the side AFC.

 

[Chowderhead1972]

2puffs has just dropped a new top air atty... looks pretty cool. Comes with all the color AFC rings, chuff top, and 510 top cap.

2 Puffs 2P Atty RDA - Complete Set

I'll do that one via send in.

 

[McPuff]

hey tom. do you have anything in a 14mm bf atty?

 

[fishwater]

Tom, any desire to do the Twisted Messes if I send it in?

 

[supersport13]

So, I've got a CAM Rogue sitting on my Reo. Right now I have a .24 ohm dual coil build, 24g, 5 wraps, 2.5mm id and I'm lovin' it! What builds are you guys runnin' on your Rogues? Just curious.

 

[Train2]

I like mah Rogues dual, at about 0.4 to 0.5 ohms. So it's like 6-wraps of 27 gauge, 2.5mm coils.

 

[Rex Everything]

In case you don't already know....The Catfish customer service is top notch

 

[custom-classic]

Catfish/Element mods Stumpy
50 SS on the first run. Black and gold will come a few weeks behind the SS. These will have Element mods/Catfish on the bottom for the first 100 pieces.
This list is SS only. The black and gold lists will be posted as they get closer.
1. penguiness
2. Travisbass
3. Travisbass
4. houndb
5. hotsauc333
6. Kentastic
7. Beez0527
8. TheDigital99
9. jazzvaper
10. pwheeler
11. EZinTN
12. Asbestos
13. rbferg
14. inspects (no drip tip needed)
15. distortoblotto
16. distortoblotto
17. inspects (no drip needed)
18. Rex Everything
19. m3th1dz
20. hotsauc333
21. Loopy1224
22. Headshrink
23. Slots
24. Drillerrt
25. btobw
26. rbferg
27. Copterstyle
28. keepsmiling
29. glassman
30. custom-classic (for RGLP4LYFE)

 

[inswva]

Catfish/Element Mods Stumpy
50 SS on the first run. Black and gold will come a few weeks behind the SS. These will have Element mods/Catfish on the bottom for the first 100 pieces.
This list is SS only. The black and gold lists will be posted as they get closer.
1. penguiness
2. Travisbass
3. Travisbass
4. houndb
5. hotsauc333
6. Kentastic
7. Beez0527
8. TheDigital99
9. jazzvaper
10. pwheeler
11. EZinTN
12. Asbestos
13. rbferg
14. inspects (no drip tip needed)
15. distortoblotto
16. distortoblotto
17. inspects (no drip needed)
18. Rex Everything
19. m3th1dz
20. hotsauc333
21. Loopy1224
22. Headshrink
23. Slots
24. Drillerrt
25. btobw
26. rbferg
27. Copterstyle
28. keepsmiling
29. glassman
30. custom-classic (for RGLP4LYFE)

The BF community here is amazing.

Sent from my XT1096 using Tapatalk

 

[Nautilusfan]

The BF community here is amazing.

Sent from my XT1096 using Tapatalk

Yes...yes it is!!!

 

[Unior]

Hey guys, anybody know price on the Stumpy SS?

 

[rbferg]

Hey guys, anybody know price on the Stumpy SS?

I believe the Stumpy is $100 plus $6 for shipping.

 

[fishwater]

I've only been here a short time but I only spend time in BF threads, this is the best community here bar none!

And a HUGE thank you to our very own CH for his amazing customer service. Thank you so much Tom for all that you do to take care of your customers.

 

[element77]

Just got a cam vector and I must say the bf job is excellent.

 

[Chowderhead1972]

Speaking of nice 4 post atty's, does anyone have the Twisted Messes RDA? I'd love to have mine bottom fed for the Cam-M.

So send it in.

Tom, any desire to do the Twisted Messes if I send it in?

i thought there was a problem with the Twisted Mess. Brass centerpost maybe? If not I'm surprised that I haven't seen one yet.
Eta: Called it.....

I knew there was a reason I didn't do a run of these:

Gold plated Brass center post makes the TM a no go.... Sorry.

It astonishes me the corners modders cut to bring a product to market. I'm betting this is also made in China. Inexcusable! Selling an atty made in China and with brass parts for over $50. No way! This could have been American made with all 303 or 316 stainless for well under $100. What would you prefer? Great design, crap implementation.

Do not send......

 

[Chowderhead1972]

I've only been here a short time but I only spend time in BF threads, this is the best community here bar none!

And a HUGE thank you to our very own CH for his amazing customer service. Thank you so much Tom for all that you do to take care of your customers.

All I do is drill holes in stuff.... The community makes it easy. I have been very lucky to have so many truly awesome people that flock around me. An hour in the same room with me and you would want nothing more than to slit my throat. I try to treat people as I would like to be treated (I had real parents growing up that saw to this). But in the broad strokes that you don't see I'm kind of a jerk, but you have given me a job to do and I take that job very seriously.

 

[Aal_]

All I do is drill holes in stuff.... The community makes it easy. I have been very lucky to have so many truly awesome people that flock around me. An hour in the same room with me and you would want nothing more than to slit my throat. I try to treat people as I would like to be treated (I had real parents growing up that saw to this). But in the broad strokes that you don't see I'm kind of a jerk, but you have given me a job to do and I take that job very seriously.

It is the good kind of jerk. I hate fake people always acting all lovey dovey, bullchiiting you then talk behind your back.

Keep doing what you do, like a razor blade ...