Catfish Atty Mods the next Chapter

[skillzizzo]

The easier solution is to adjust the 510 on your Tmod IMO. Tom just posted the procedure in his thread.

Thank u for the reoly. I know how to adjust the 510 on the mod I have before. My issue and quistion about it is the 510 is allready bottoming out on the top of to bottle cap. So I do not want to screw it down any further at Fisk of it bending the 510 squonk shaft. Thank you for your time

 

[Chowderhead1972]

So.... Not big on the Pancake? I thought this was supposed to be the next big one?
3 on the list?

 

[Chowderhead1972]

The easier solution is to adjust the 510 on your Tmod IMO. Tom just posted the procedure in his thread.

It's ok... The Thump is one of the very few that use the stock center pin, I don't like the depth of the 510 either but I can make it adjust flush on everything I have. That said if you want to send it back I will mill .2-.3mm off the pin, this will take the dome out of the pin. Just pay shipping.

 

[Papa_Lazarou]

So.... Not big on the Pancake? I thought this was supposed to be the next big one?
3 on the list?

Sorry, brother - got my fill of flapjacks from the modder. Didn't know you'd be stocking them or I'd be on the list.

It's a very unique atty, folks. Low profile, great machining (and hey, titanium no less), and one of the most versatile build decks ever. The air's not super big, but very serviceable.

 

[TheDigital99]

I too jump on the pancake from the modder before it came up here... I would how ever be interested in some hex screws of you already ordered them

 

[distortoblotto]

Sorry, brother - got my fill of flapjacks from the modder. Didn't know you'd be stocking them or I'd be on the list.

It's a very unique atty, folks. Low profile, great machining (and hey, titanium no less), and one of the most versatile build decks ever. The air's not super big, but very serviceable.

I too jump on the pancake from the modder before it came up here... I would how ever be interested in some hex screws of you already ordered them

Me three...( almost feel like I'm cheating on my wife! ) Just arrived yesterday and haven't built it yet. Pretty good air coiless. ( in fact a wee bit more than the Thump) Size and placement going to be everything methinks...

 

[distortoblotto]

Catfish Tuesday...Kick'in it on the first of 7 days off...
Manta with well broken in ( see grungy) 28g 0.4 twisty's and well aged Granny's Cinnamon Danish...

 

[inswva]

Catfish Tuesday...Kick'in it on the first of 7 days off...
Manta with well broken in ( see grungy) 28g 0.4 twisty's and well aged Granny's Cinnamon Danish...

View attachment 527443

View attachment 527444

The Manta looks great on the Red Sky!

 

[Unior]

It's ok... The Thump is one of the very few that use the stock center pin, I don't like the depth of the 510 either but I can make it adjust flush on everything I have. That said if you want to send it back I will mill .2-.3mm off the pin, this will take the dome out of the pin. Just pay shipping.

I'm having similar issues with the Thump. Is the 510 adjustable on the Thump? If so I will try that. I might see if you can shorten it for me if it doesn't.

 

[Houndb]

I already have a pancake and it is nice to play with but I am still in love with my snapdragons good air, taste great and hard to leak. I have a issue with pancake and making it leak. I am on the lookout for at least one more or even possibly two more snapdragons and I already have three.

 

[Papa_Lazarou]

I already have a pancake and it is nice to play with but I am still in love with my snapdragons good air, taste great and hard to leak. I have a issue with pancake and making it leak. I am on the lookout for at least one more or even possibly two more snapdragons and I already have three.

Snappies are tres cool atties, but the size of it... man, the size of it...

Much better (IMHO) with after market caps.

(okay, okay - I'm a shallow person)

Haven't had leaks with the pancake as of yet, but I'll be wary now.

 

[pennysmalls]

If I weren't about to make a very expensive mod purchase I'd be all over that Pancake. Timing is just bad for me.

 

[rudedog]

bad timing here too,truck just cost me another 150$ and then the wifes battery in her car took a crap...no attys in the near future here.

 

[jhhollier]

So.... Not big on the Pancake? I thought this was supposed to be the next big one?
3 on the list?

I think I'm bad luck. Every time I sign up for an atty, interest is non-existent.

 

[Chowderhead1972]

I'm having similar issues with the Thump. Is the 510 adjustable on the Thump? If so I will try that. I might see if you can shorten it for me if it doesn't.

Not adjustable.

 

[skillzizzo]

It's ok... The Thump is one of the very few that use the stock center pin, I don't like the depth of the 510 either but I can make it adjust flush on everything I have. That said if you want to send it back I will mill .2-.3mm off the pin, this will take the dome out of the pin. Just pay shipping.

I got it figured out with tbev. I just wanted to make sure it was ok for the 510 pin to be adjusted to the point were the pin went about a 1/8th of an inch into the feed bottle. Only thing that will suck about its length is when swapping atty u will have to move the 510 pin. I appreciate the offer to have it shaved down. I'm loving it at the momment so don't realy want to send it in at the momment my freind.

 

[MFToms59]

Built the Swirlfish last night, Nichrome 80 26g, 5 wrap 3.5mm ID dual-coils @0.312 ohms, three pulls on 10mg nic juice gave me quite the buzz. The Atty has really good flavor and if you're into big air this has it, being a MtLer, I'm able to close it fairly tight, a pretty good buy for ~$62.00 shipped.

One problem with the top air-holes is it's non-existent adjustability, like the Rogue, the top cap is ~1.5-2mm too tall to sit flush on the cap... I'll be doing a bit of sanding this weekend.

BTW it's an easy atty to build with the double positive wire captures.

 

[Unior]

Anybody besides houndb have any leaking issues with the pancake?

 

[distortoblotto]

Quick flapjack build...All I'm going to say is, be careful with ohmage and coil placement. Titanium heats up fast!

 

[penguiness]

Quick flapjack build...All I'm going to say is, be careful with ohmage and coil placement. Titanium heats up fast!

View attachment 527550

I chain vape for a few minutes with long breaks in between. Spaced coils helped for my vaping style.