Choosing the right wicking material

Status
Not open for further replies.

pwheeler

Just Vaping
ECF Veteran
Verified Member
Nov 14, 2013
9,157
31,761
68
Weimar, TX
I use cellucotton, as well as Koh Gen Do, RxW, cotton hemp mix and others. The CC wicks like mad, and dry hits have only a mild unpleasant taste, but nothing like burning cotton. It has the most neutral taste of any wicking material I've tried. If you buy a box of it, it's enough to last several lifetimes, at least a hundred years or so. :)
 
I used to be a huge fan of ekowool, but I've found organic cotton allows for crazier builds. Cotton seems much more forgiving than silica wick on a dry hit as well. I don't boil mine. When I used silica though, I got rid of the chemical taste by torching the wick til it glowed to burn off all the chemicals. Hope that tip helps
 

K_Tech

Slightly mad but harmless
ECF Veteran
Verified Member
Sep 11, 2013
4,208
5,109
Eastern Ohio, USA

druckle

Ultra Member
ECF Veteran
Verified Member
Sep 20, 2013
1,149
2,193
Scottsdale, Arizona, USA
The right wicking material is dependent on a lot of variables....viscosity of e liquid, power level, air flow, etc. I used organic cotton for quite a while but recently discovered Cellucotton (rayon) and Ramie. I now think both are superior to cotton but the most forgiving wick for various conditions, best wicking and cleanest tasting is Ramie by far IMHO. I use Ramie for 95% of my builds and I'm a totally happy camper with that.
 

happydave

Ultra Member
ECF Veteran
Jun 2, 2013
1,580
684
United States
it seems like rayon (cellucotton) is quickly becoming the wick material of choice for many. sounds like the way to go, but I'm still a lil bit skeptical about the safety of rayon at high temps despite it being made from things all natural.

i have always been skeptical about all of the cellulose fiber type wicks. it just seems like a poor choice when you have amorphous silica as an option.
silica wick will not burn or thermally degrade at all when used in an e-cigarette. the heating wire would melt apart before the silica got hot enough to burn. and all of the scientific studies conducted thus far have been done using atomizers that use silica wick. the results of these studies look very promising, and i would like to think im achieving similar results in my rebuildable atomizer. using a cellulose fiber based wick throws another known factor into the mix.
 
Last edited:

RIMP

Vaping Master
ECF Veteran
Verified Member
I've used Koh Gen Doh and rayon (cellucotton). I prefer the rayon. Excellent wicking properties and you can change flavors easily, in 2 puffs it changes over to the new liquid :) The KGD wicks well too. Just not as well as the rayon and the first few puffs are kinda weird tasting. Hard to find the KGD. Cellucotton is available at Sally's Beauty Supply. Don't get the reinforced kind. It has a paper strip running thru it :vapor::2c:
 

happydave

Ultra Member
ECF Veteran
Jun 2, 2013
1,580
684
United States
I may just pick up some rayon and silica soon to compare. so far I've only been on Japanese organic cotton.

i torch my silica with a small butane torch before i use it, this cleans off any random dust partials, skin oils, or anything that would come off the wick when your vaping it and produce a bad flavor.
 

CabinetGuyScott

Super Member
ECF Veteran
Jan 24, 2014
484
1,188
Detroit
customcabinetsbycasey.com
I've been watching the couple of major threads discussing rayon / cellucotton, and subsequently picked up the several lifetimes supply.

I was completely skeptical of the claims of greatly enhanced flavors.

First thing I did was just to swap out the 'flavor wicks' on some kanger heads, and put them right back into the tank...

WOW!! :banana:

This alone made flavors burst-forth.

Wicks different from cotton, so still playing a bit with making the adjustments for rebuilding the heads.

Very very happy with rayon, and likely have enough to supply the entire state of Michigan for a year :thumbs:
 
Status
Not open for further replies.

Users who are viewing this thread