Cleaning the turbos

Status
Not open for further replies.

critterbug

Super Member
ECF Veteran
Verified Member
Dec 21, 2009
593
81
Herein, VA
OK, so I have to place another order for cartos. Here's the thing: I can't find a way to clean my Turbos that really works. I refill about 10 times with liquid from TastyVapor. By the 7th or 8th time, I have to draw really hard. Every time I clean the turbos, one of two things happens: (1) They no longer vape (clean by boiling) or (2) they're still hard to draw and don't taste good (cleaned by repeated vodka and then hot water rinses). Is there a good way to clean these to make them reusable? I like the Turbos - they're my favorite of the cartos I've tried. However, the cleaning problem has not happened with the other cartos. Advice? Thoughts? Successful cleaning methods? Do Turbos not play well with some TV juices?
 

Synthnadz

Super Member
ECF Veteran
Verified Member
Aug 11, 2009
527
0
Florida
Here's what I do:

1. Blow them out thoroughly to remove most of the liquid
2. Run them under hot tap water for 10 seconds
3. Blow them out again until they are almost completely dry
4. Repeat steps 2 and 3 about 4 times.

Then I let them dry for 48 hours.

The Turbos are a bit more dense with filler than other cartos, so clearing them out can be a bit more cumbersome. However, I've found that they last much longer than 'traditional' cartos and almost never burn - even at 5+ volts.

Anyway, I hope this helps.
 
Status
Not open for further replies.

Users who are viewing this thread