- Status
So I got my black CNA mod from WetVapes today. First off, this thing feels solid! Put a 1.7 ohm dripper on there and fired it at about 28 watts and it is cranking! Using my Kayfuns which were all built from 1.1-1.3 ohms, it works great as well. I like one particular one for this mod which I have set to 15.2 watts. Seems to read ohms correctly, and if I was to change to anything that it would need to fire at 3.9V it will blink and just dump battery power unregulated as everyone said it would.
Couple things I notice.
Screen does come on sometimes randomly.
Sometimes it does need one click to wake it up then one to fire
Sometimes it fires straight out of sleep
Wattage has randomly changed .1 down. IT seems as though it only goes .1 watt down when it needs the two clicks to come from sleep mode.
Otherwise this thing is a beast. My 510 connection is NOT crooked, the back panel fits great, the black finish is awesome, overall I am super happy. Reinforces the fact I would never have paid 250 for a real one, but I love this thing for 80 or so bucks.
Full size provari, CNA, and a Nemesis hybrid mode in 350 for size comparison shots.
Couple things I notice.
Screen does come on sometimes randomly.
Sometimes it does need one click to wake it up then one to fire
Sometimes it fires straight out of sleep
Wattage has randomly changed .1 down. IT seems as though it only goes .1 watt down when it needs the two clicks to come from sleep mode.
Otherwise this thing is a beast. My 510 connection is NOT crooked, the back panel fits great, the black finish is awesome, overall I am super happy. Reinforces the fact I would never have paid 250 for a real one, but I love this thing for 80 or so bucks.
Full size provari, CNA, and a Nemesis hybrid mode in 350 for size comparison shots.
He's had to change his tune because the clone:authentic ratio in the wild is overwhelmingly in favor of clones. So many people have them, and if you want an audience for your YouTube channel, you'll need to tone down the hate about the gear that most people have.
There is a reason why VapingWithTwisted420 now has more subscribers than Todd's Ecig Reviews. Todd isn't hostile towards clones that I know of, but everything he reviews is top end. I've never seen him with a lowly clone of one kind or another. Twisted reviews clones all of the time (even if he isn't all that great at delivering anything besides the feelz about a particular piece of hardware - and not that Todd is either) and has told vendors who insist he stop reviewing clones if he wants free stuff for review that they can shove it.
Clones are here, and as long as most original equipment is both in short supply and high in price, they're here to stay. And if you want to be a "celebrity" in the vaping world, you're gonna need to talk clones.
Phil Busardo seems to not really like clones all that much but acknowledges that they exist and that they are what most vapers buy. See his Kayfun v Russian review. He makes it clear that though some people don't like clones, it's what people buy and he's on the lookout for people. I'd like to see him review more clones, TBH, but I imagine that he gets so much gear to review that clones lie low on the list for the most part.
Tbh, I like Twisteds reviews because he's real. He knows not everyone has thousands of dollars to urinate away on vape gear, or at least has a significant other that won't allow them to, lol
Wishful thinking. I want to see how the colors came out for my next order. These things are great.
Sent from my GT-N5110 using Tapatalk
Last edited:
There are some who have received colors. Ive seen orange and blue, at least. i have a Silver coming tomorrow, and a blue and green one coming whenever.
They may just be better quality than an authentic!
Got it today, my clone is still in transit!
Got it today, my clone is still in transit!
They may just be better quality than an authentic!
Got it today, my clone is still in transit!
That's the authentic? I'd be angry...
$250 should at least give you a straight 510... Especially if China can do it in mass production....
In one of his (or his last) video Twisted stated that essentially it was suggested to him that he stop reviewing clones or some of his suppliers would stop sending samples to him. He basically said tough doo-doo because he felt more people used clones than the real deal so that's what he was going to review.
China is quickly becoming the new Japan. When I was a kid the Japanese imports where often referred to a cheap junk which they where. Then one day they produced a small transistor based radio, at the time of the old vacuum tubes in radio day for almost nothing in cost. With in the next few years they had become a leader in electronic followed by cars. None of their early technology was based on their designs but designs from the USA however they actually used them and produced the products for much cheaper costs etc. They also lead the world today in robotics another thing first thought up by the USA but never really used. This has been true of much of the worlds design nations as I refer to them such as the USA, Germany, Greece, Italy, etc. They design it then the 3rd world applies it to the real world.
Yep. He also posted in on Facebook. He outright said that if vendors chose not to send him products because he reviews clones that it would be the vendor's loss, not his. He's going to continue reviewing clones because that is what most people have, and what most people are in the market to buy.
They may just be better quality than an authentic!
Got it today, my clone is still in transit!
That's some first class BS right there.
Perhaps Hana should have let the logo clones go without a lawsuit. It just might make their brand BETTER.
Vaping off of my Silver right now. The battery (Efest Purple 3100mah 20A) took FOREVER to charge in the charger before I put it in, but we're vapin' now.
Very smooth. Vaping a KFL+ v2 (EHPro) with a 1.4Ω coil at 14W. Very nice vape. The buttons are nice and clicky. I don't intend to open this box again until I need to switch batteries in the future. All charging will be done via USB so as to try and avoid stripping these terrible screws. I didn't have any problems getting mine out or back in, but it's definitely a weak point.
The biggest con so far? The Silver is a fingerprint magnet. I'll absolutely be putting a wrap on it just as soon as Vaper Skinz has their sizing done for it. I want the F The FDA wrap.
Very smooth. Vaping a KFL+ v2 (EHPro) with a 1.4Ω coil at 14W. Very nice vape. The buttons are nice and clicky. I don't intend to open this box again until I need to switch batteries in the future. All charging will be done via USB so as to try and avoid stripping these terrible screws. I didn't have any problems getting mine out or back in, but it's definitely a weak point.
The biggest con so far? The Silver is a fingerprint magnet. I'll absolutely be putting a wrap on it just as soon as Vaper Skinz has their sizing done for it. I want the F The FDA wrap.
- Status
Similar threads
