Cloupor Mini Mod 30W

[eddiea]

Great, just great. I waited a month for this thing. It worked for about 50 draws. Now, the screen has gone dark and I can't figure out how to make it come back.

-Tried turning it off, then on
-Tried changing the battery
-Tried every button combination included in the user manual

NOTHING, dark screen

Any suggestions?

That's not good news (for you and all of us Cloupor Mini owners). Did you try resetting it?...the reset button at the bottom. If all else has failed, I'd say it's time to request an RMA quickly. Let us know how things turn out because I'm sure I'm not the only one interested in knowing what happened.

 

[crxess]

That's not good news (for you and all of us Cloupor Mini owners). Did you try resetting it?...the reset button at the bottom. If all else has failed, I'd say it's time to request an RMA quickly. Let us know how things turn out because I'm sure I'm not the only one interested in knowing what happened.

If you are talking about that hole in the bottom, opposite the USB............................ Battery Vent.

 

[crxess]

Great, just great. I waited a month for this thing. It worked for about 50 draws. Now, the screen has gone dark and I can't figure out how to make it come back.

-Tried turning it off, then on
-Tried changing the battery
-Tried every button combination included in the user manual

NOTHING, dark screen

Any suggestions?

Was this thing still firing?

Has anyone tested to be sure the Stealth Mode has been Removed???
This is the Same Cana dna 30 Chip, updated.

 

[Croak]

Was this thing still firing?

Has anyone tested to be sure the Stealth Mode has been Removed???
This is the Same Cana dna 30 Chip, updated.

Stealth mode switch sequence seems to have been replaced with Voltage mode. That and the 3.6v low limit leads me to believe this is more than just a cDNA30 v3.

 

[crxess]

Posted in Latest News By
cloupor


Cloupor Mini 30W box mod,
1. 7W-30W output power
2. built on 0.45ohm-3.0ohms atomizer (can work and sit flush on 0.5ohms Atlantis)
3. Adjustable 510 pin
4. Removable 18650 battery
5. Magnet back cover
6. 3.6V-7.0V output voltages
7. Quite small size
8. VV/VW mode
which absolutely will be the winner in mini mods competition.
Our Cloupor mini's chip is the upgraded version of our Cana DNA30, our DNA30 stands certain reputation and market, most reviews are good.

Can only go by what I find. Just trying to help find a solution.
Might be remnant coding causing an issue. That could get serious for many unless it can be controlled.

 

[Fergie]

Lets see if more users experience it, could be just a defective board or whatever. I'd be sending it back for sure.

 

[frazam]

The one thing I keep reading and cannot stand is:
This is all I could afford to spend and now................Bla bla bla.......................

If you cannot afford it and cannot handle the pressure of waiting...........PLEASE THINK........and maybe don't spend to start with.

Um ok... I didn't know budgeting one's finances is such a bad thing as to irritate people. Sorry for not THINKING that, Mr. Perfect bla bla bla... At least I make an effort to budget for vape stuff rather than go back to smoking (which is way cheaper here than vaping at under a dollar a pack).

Anyway, I posted my reply to get the attention of elev8, which it did. After I posted, elev8 promptly replied to my emails. I suspect they do keep an eye on the forums.

 

[Fergie]

Nevermind.

 

[HDMontana]

Um ok... I didn't know budgeting one's finances is such a bad thing as to irritate people. Sorry for not THINKING that, Mr. Perfect bla bla bla... At least I make an effort to budget for vape stuff rather than go back to smoking (which is way cheaper here than vaping at under a dollar a pack).

Anyway, I posted my reply to get the attention of elev8, which it did. After I posted, elev8 promptly replied to my emails. I suspect they do keep an eye on the forums.

I also finally got an email response from them today.

HD

 

[crxess]

Um ok... I didn't know budgeting one's finances is such a bad thing as to irritate people. Sorry for not THINKING that, Mr. Perfect bla bla bla... At least I make an effort to budget for vape stuff rather than go back to smoking (which is way cheaper here than vaping at under a dollar a pack).

Anyway, I posted my reply to get the attention of elev8, which it did. After I posted, elev8 promptly replied to my emails. I suspect they do keep an eye on the forums.

Wait while I get a Towel.
More likely someone finally had time to get to the added load. I can tell you, from another thread involving purchasing and emailing about product. Your post had no effect on them, positive or negative.

I'll help anyone in need, but have little for complainers.
________________________________________________________________________________________

I will post back here if I find anything of value once I receive my Mini.
Otherwise
I'm out.

 

[Fergie]

Wait while I get a Towel.
More likely someone finally had time to get to the added load. I can tell you, from another thread involving purchasing and emailing about product. Your post had no effect on them, positive or negative.

I'll help anyone in need, but have little for complainers.
________________________________________________________________________________________

I will post back here if I find anything of value once I receive my Mini.
Otherwise
I'm out.

Patience is indeed a virtue.

 

[Trailz]

Your post had no effect on them, positive or negative.

Maybe no effect on sales but I have to say that when I posted my experience with them in another thread someone else started about their poor customer service, I had a PM from them within an hour or so. It had been a week since I'd had any communication from them. In the PM they asked my order number. I received an email reply the next day indicating that a replacement device was being sent out.

 

[frazam]

Got my Clouper Mini today from a B&M store and I'm surprised how well put together this thing is. Unlike some of the youtube reviews, mine is flush all along the battery door (using the same purple efests as the other reviewer). Using the tab under the battery, it's still flush. Magnets are strong, I can't easily slide it off (have to pull it off using the small notch under the unit). 1 sec delay from sleep is there though.

At first, I was concerned because the ohm readings were fluctuating wildly. On my kayfun 3.1, one drag would read 1.6, the next it would shoot up to 2.3, the next it would go to 1.8, then 1.5. Fearing it was a chip defect, I changed to my dripper (immortalizer), and it still fluctuated, albeit +/- .03 ohms. So I figured my kayfun had a short or something. However, after adjusting the 510 screw, the kayfun stopped fluctuating. With the kayfun and dripper, it now fluctuates between +/- .03-0.5 ohms.

No complaints here

 

[janne303]

Someone on a facebook mod group aint happy of his Cloupor mini today.

"Just in case anybody was looking at the new Cloupor Mini dna30....this happened in 3 1/2 days, they don't answer email & keep deleting my posts from their FB PAGE."

 

[inswva]

Someone on a facebook mod group aint happy of his Cloupor mini today.

"Just in case anybody was looking at the new Cloupor Mini dna30....this happened in 3 1/2 days, they don't answer email & keep deleting my posts from their FB PAGE."


View attachment 404197

That's not good.

 

[Circa Survivor]

Someone on a facebook mod group aint happy of his Cloupor mini today.

"Just in case anybody was looking at the new Cloupor Mini dna30....this happened in 3 1/2 days, they don't answer email & keep deleting my posts from their FB PAGE."


View attachment 404197

Did the hologram sticker burn off or did he possibly take it off and get into the internals?

 

[SS stingray]

Someone on a facebook mod group aint happy of his Cloupor mini today.

"Just in case anybody was looking at the new Cloupor Mini dna30....this happened in 3 1/2 days, they don't answer email & keep deleting my posts from their FB PAGE."


View attachment 404197

Do you know how this happened ? Maybe during charging ? Now i can't wait for my nitecore charger !!

 

[janne303]

Dunno. Im checking if he replied anymore now. Il be back

Skickat från min D6503 via Tapatalk

 

[janne303]

" It was a brand new Samsung 25r & I had plugged it in laptop usb with provided USB cable. Wasnt vaping it at all."

Skickat från min D6503 via Tapatalk

 

[Circa Survivor]

" It was a brand new Samsung 25r & I had plugged it in laptop usb with provided USB cable. Wasnt vaping it at all."

Skickat från min D6503 via Tapatalk

I don't think it's recommended to plug these devices into computers or laptops. Different power outputs and whatnot.