coil build goes weird,I need explanation

[PantatBuduk]

Hi peps

so I made parallel coil for my hadaly ni80 24awg 4 wraps at 3mm it got 0.19 ohm

and I made another paraller coil for my goon 22 with the same wire except I made it 8 wraps and it got 0.29 ohm

I even rebuild the paraller coil for my hadaly and its exactly give me 0.19 again no more,no less

I dont have any problem or weird flavour of my hadaly infact it do made the great hadaly flavour even became more phenomenal

my question is why did on earth 4 wraps on hadaly have 0.19 then 8 wraps on goon have 0.29????


Thanks

 

[Asbestos4004]

Legs

 

[zoiDman]

Hi peps

so I made parallel coil for my hadaly ni80 24awg 4 wraps at 3mm it got 0.19 ohm

and I made another paraller coil for my goon 22 with the same wire except I made it 8 wraps and it got 0.29 ohm

I even rebuild the paraller coil for my hadaly and its exactly give me 0.19 again no more,no less

I dont have any problem or weird flavour of my hadaly infact it do made the great hadaly flavour even became more phenomenal

my question is why did on earth 4 wraps on hadaly have 0.19 then 8 wraps on goon have 0.29????


Thanks

Maybe I am Misunderstanding what you Did?

But if you use the Same Gauge and Same Type of Wire, then when you Add Wraps you are going to Increase the Resistance.

So a 8 Wrap Coil is going to have a Higher Resistance than a 4 Wrap Coil.

 

[Baditude]

Maybe start more simple and make a "simple" coil. Forget the fancy coils for the time being.
How to Build an RDA Coil: A Beginner’s Guide

 

[Asbestos4004]

Maybe I am Misunderstanding what you Did?

But if you use the Same Gauge and Same Type of Wire, then when you Add Wraps you are going to Increase the Resistance.

So a 8 Wrap Coil is going to have a Higher Resistance than a 4 Wrap Coil.

I figured he was wondering why it didn't double. The goon has legs on the same side, usually losing half a wrap to an enthion type coil with legs opposite each other. Maybe you're right.

 

[untar]

Yes, legs. Plus the base resistance of the atomizer and contacts inside the mod, those aren't zero either.
So what you're seeing is coil+legs+atty+contacts, those will always be part of the resistance your mod shows (unless you got something like a dna where you can measure and set mod resistance).

 

[zoiDman]

I figured he was wondering why it didn't double. The goon has legs on the same side, usually losing half a wrap to an enthion type coil with legs opposite each other. Maybe you're right.

You might be Right. And if so, Leg Length and Round Off Error would be in there.

 

[PantatBuduk]

Legs

Maybe I am Misunderstanding what you Did?

But if you use the Same Gauge and Same Type of Wire, then when you Add Wraps you are going to Increase the Resistance.

So a 8 Wrap Coil is going to have a Higher Resistance than a 4 Wrap Coil.

yeah,that's what I'm beleivein too,but I guess different atty different resistance

Maybe start more simple and make a "simple" coil. Forget the fancy coils for the time being.
How to Build an RDA Coil: A Beginner’s Guide

thanks for the video,time to learn

I figured he was wondering why it didn't double. The goon has legs on the same side, usually losing half a wrap to an enthion type coil with legs opposite each other. Maybe you're right.

Yes, legs. Plus the base resistance of the atomizer and contacts inside the mod, those aren't zero either.
So what you're seeing is coil+legs+atty+contacts, those will always be part of the resistance your mod shows (unless you got something like a DNA where you can measure and set mod resistance).

You might be Right. And if so, Leg Length and Round Off Error would be in there.

I see I see,so the atty itself have their number of resistance,all this time I thought only coil that's matter
its all clear to me now,thanks for the reply guys,I really appreciate it

 

[93gc40]

What is ohm with NO coil?

Steam-engine.org is your friend.

Sent from my SCH-I605 using Tapatalk

 

[bwh79]

What is ohm with NO coil?

1/0