Copper Creek Chit Chat, Part #4

[tlmoody27]

I'm glad you are enjoying your new ride, Punkin. Both of our vehicles are in my husbands name. Doesn't matter to me. If he goes then it comes to me anyway.

Happy Mother's Day!!

 

[Drottwiler]

These are Kanthal A1 24 AWG 0.5 Ohm
$9.29 LTQ Vaper Kanthal A1 Pre-Coiled Resistance Wire for Rebuildable Atomizers (200-Pack) - 24 AWG / 0.5mm dia. / 0.5ohm / 15*20mm leads at FastTech - Worldwide Free Shipping

These are Kanthal A1 28 AWG 1.0 Ohm
$4.95 LTQ Vaper Kanthal A1 Pre-Coiled Resistance Wire for Rebuildable Atomizers (100-Pack) - 28 AWG / 0.32mm dia. / 1ohm / 11*16mm leads at FastTech - Worldwide Free Shipping
What ever wicking you like. As you already know if using cotton keep it wet or it will burn. This I know from experience burned a wick right out of the coil. Don't ask.These make it easy pezzy. The hard parts getting the wick in that little wire.

Or These work well for me also. They all work in my Kayfuns and PT rebuilds. Just make sure you trim the wire as close as you can at the post and make sure the coils not touching the base you'll be good to go. Depending on the juice they last long. I have two I use evert day going on 2 months. I'm lazy if the flavors still right I don't play with them. Just my
$4.95 LTQ Vaper Kanthal A1 Pre-Coiled Resistance Wire for Rebuildable Atomizers (100-Pack) - 28 AWG / 0.32mm dia. / 1ohm / 11*16mm leads at FastTech - Worldwide Free Shipping
$2.42 Pre-made Wires and Wicks for Atomizer (50-Pack) 50-pack - 34 AWG / 2.0ohm / 8-wick at FastTech - Worldwide Free Shipping
$2.11 Replacement Wicks and Wires for Rebuildable Atomizer (50-Pack) 50-pack - 2.0ohm / twisted wick at FastTech - Worldwide Free Shipping
$3.19 Pre-made Wires and Wicks for Atomizer (50-Pack) - 33 AWG / 0.18mm dia. wire / 50mm wick length / 1.8ohm / 4-wick at FastTech - Worldwide Free Shipping

 

[Bamrz]

Drott, how do you know what size to get for what?? There are way too many choices!

And Happy Mother's Day to all the moms! (furry and feathery kids count too!)

 

[Drottwiler]

Sunny and 67 at the shack. Winds a blowing. Hopefully the wind will dry out the chick duck run.

 

[Drottwiler]

I get different OHMs but as long as I can Screw them in the posts and make sure their not touching the bottom they work. I Just adjust the mod to taste. I still use the Kanthal but they sell the nickel and ss also.

 

[Drottwiler]

 

[FlyingV]

View attachment 552273

What she said!

And good afternoon everyone, hope you are having a fantastic day.

 

[Drottwiler]

Soo if the neighbors thought I was crazy be for they probably think so now. Some how the wind moved my patio table about 6 ft. Glass umbrella broken. After trying to rake the glass up. I decided to bring the shop vac out. Thank goodness the grass was just mowed yesterday. Shop vac made it a quick job.

 

[stretchpants]

Welcome back to the hill of working Drott.

Yep, the cigar guys are our biggest ally right now. They have the organization and resources to pull it off. Sadly, we still don't. But I do urge everyone to call their reps and beg them to help. There is a bill that Cole put forward changing the grandfather date to the date of deeming. That would save everything that is currently on the market. I should know the HR #, but I can't think of it right now. We all need to get on the darn phone Monday morning and be persistent.


Stretchy, I am using subtanks. All you have to do is unscrew 2 little screws and put in a fresh coil and piece of cotton. It's so easy, even a witchdoctor can do it.

This is where my eyeballs roll to the back of my head..I can't get past it..Kanger Subtank? Do you have to sub ohm? should I sub ohm? and if I do when would that be exactly? Right now I'm sporting an Istick 30 with an Aspire mini Nautilus using a 1.8 BVC coil..When the chicken crap hits the fan I will eventually be using a Provari...The old kind..I don't think they sub ohm...right?

 

[stretchpants]

Soo if the neighbors thought I was crazy be for they probably think so now. Some how the wind moved my patio table about 6 ft. Glass umbrella broken. After trying to rake the glass up. I decided to bring the shop vac out. Thank goodness the grass was just mowed yesterday. Shop vac made it a quick job.

Exactly what I would do...

 

[stretchpants]

These are Kanthal A1 24 AWG 0.5 Ohm
$9.29 LTQ Vaper Kanthal A1 Pre-Coiled Resistance Wire for Rebuildable Atomizers (200-Pack) - 24 AWG / 0.5mm dia. / 0.5ohm / 15*20mm leads at FastTech - Worldwide Free Shipping

These are Kanthal A1 28 AWG 1.0 Ohm
$4.95 LTQ Vaper Kanthal A1 Pre-Coiled Resistance Wire for Rebuildable Atomizers (100-Pack) - 28 AWG / 0.32mm dia. / 1ohm / 11*16mm leads at FastTech - Worldwide Free Shipping
What ever wicking you like. As you already know if using cotton keep it wet or it will burn. This I know from experience burned a wick right out of the coil. Don't ask.These make it easy pezzy. The hard parts getting the wick in that little wire.

Or These work well for me also. They all work in my Kayfuns and PT rebuilds. Just make sure you trim the wire as close as you can at the post and make sure the coils not touching the base you'll be good to go. Depending on the juice they last long. I have two I use evert day going on 2 months. I'm lazy if the flavors still right I don't play with them. Just my
$4.95 LTQ Vaper Kanthal A1 Pre-Coiled Resistance Wire for Rebuildable Atomizers (100-Pack) - 28 AWG / 0.32mm dia. / 1ohm / 11*16mm leads at FastTech - Worldwide Free Shipping
$2.42 Pre-made Wires and Wicks for Atomizer (50-Pack) 50-pack - 34 AWG / 2.0ohm / 8-wick at FastTech - Worldwide Free Shipping
$2.11 Replacement Wicks and Wires for Rebuildable Atomizer (50-Pack) 50-pack - 2.0ohm / twisted wick at FastTech - Worldwide Free Shipping
$3.19 Pre-made Wires and Wicks for Atomizer (50-Pack) - 33 AWG / 0.18mm dia. wire / 50mm wick length / 1.8ohm / 4-wick at FastTech - Worldwide Free Shipping

Huh?

 

[stretchpants]

So I'm going to buy a Kanger Top Box mini kit...I think the tank does premade coils and they also have do it yourself coils. My dog just farted and it's disgusting..as I was saying...I'll buy the whole deal and hopefully will be able to find how to use them....eventually..maybe...I hate the FDA...

 

[tlmoody27]

Hope everyone has had a good Mother's Day.

We went to my moms, then walmart for groceries. Hubby and I took a little nap and now relaxing on the sofa. I only did minimal housework this morning. I'll have to play catch up tomorrow.

I'm very basic with my equipment. I the aspire bvc tanks and a nice twist like battery by aspire, 2 isticks, and an istick look alike. I forget what flavor I put in what tank so I label them with little round stickers on the tank. Not the most attractive, but it works.

 

[Bamrz]

Stretchy, you're better off sticking with things that are not sub ohm if you like what you are using. Sub ohm stuff can go through a lot more juice depending on how you have it set up.

What I would suggest is finding anything rebuildable that you might like. Coils and cartos are going to get scarce if the poop hits the fan.

 

[FlyingV]

Good morning!

Agreeing with Bamrz.

 

[stretchpants]

I'll go do my research. I really do just want something simple.I thought OHMS was a meditation chant..So I'm hoping to find something on YouTube that has something like coil building for dummies whose eyes roll back to their heads after the word welcome..I came across this guy and I feel his username fits me to a tee. so here goes..

 

[FlyingV]

I'm going to watch it too Stretch, maybe it will help me make better ones.

 

[stretchpants]

What does everyone think about a KAyFUN Mini 3? It's expensive but it looks easy and I won't have to buy coils so it would probably pay for itself in the long haul.

 

[FlyingV]

Good morning!

I've not seen that one Stretchy. Maybe Drott or Bamrz can help.

 

[Bamrz]

I have a Kayfun lite, love it! It's still on the original coil, although I've re-wicked it several times. No leaks, very friendly IMHO.