Could sombody recommend what I might use for a "hit after quick hit"...

[Newbie from PA]

Thinking about the a CE3 type / Cartomizers just too slow to re-juice the coil / Do you guys think the CE3s will do it?....or....What might you recommend....(I have an X-2 900 batt comming)...THANKS FOR ALL YOUR HELP SO FAR!
Yeah, don't know much yet but I guess I'm looking for a delivery system that will almost "constantly" soak the coil. Am I asking for too much ya think?
Not real savy here but my guess is the juice doesn't seep down fast enough for me on a cartomizer....(Probably a common thing)....I Can wait a few seconds between drags...
.....I am using the VOLT & X-2 (Smokeless Image co) so for now I'm stuck with the CE3 etc or Clearos?.....guess i can use "anybody" with 808 thread,...I guess?
...Well aware that "dripping" would require a manual "totally sealed" batt by the way,...Got it on the way

 

[zoiDman]

Thinking about the a CE3 type / Cartomizers just too slow to re-juice the coil / Do you guys think the CE3s will do it?....or....What might you recommend....(I have an X-2 900 batt comming)...THANKS FOR ALL YOUR HELP SO FAR!

What type of PG|VG e-Liquid to do use? And what type of Voltage or Wattage do you like to Vape at?

 

[Newbie from PA]

it is the VOLT or (X-2 900 mAh....comming soon)
I think they both run "Regulated" 3.6 V

Oh yeah...Smokeless Image (Dessert Joe) I ordered....Think it's a more P/G based.

Probably (temp) sop my cartomizers for now I guess.

Think CE3s : 2.6-2.8 Ohms @ 3.6 V "regulated"

 

[zoiDman]

CEx's usualy don't have too many Problems with PG Based e-Liquids when Vaped below 8 watts of so. You're at 4.8 watts, (3.6*3.6)/2.7 = 4.8, so that whould be No Problem.

The hit may be somewhat Cool and Mild at 4.8 watts on a Bottom Coil like the CE3. But that might be what you're going for.

 

[Mroutlaw]

it is the VOLT or (X-2 900 mAh....comming soon)
I think they both run "Regulated" 3.6 V

Oh yeah...Smokeless Image (Dessert Joe) I ordered....Think it's a more P/G based.

Probably (temp) sop my cartomizers for now I guess.

Think CE3s : 2.6-2.8 Ohms @ 3.6 V "regulated"

The SI ce3 are 2.4-2.6ohm.

Also, although the website says the X2's are 3.6v regulated, but it is more like 3.7-3.8v. They also come off the charger at about 4.0v under load in my experience. They only stay at 4.0v for about 10-15 vapes them drop to around 3.7-3.8 for the life of the charge. About 5-6 vapes before the battery dies, the voltage drops to 3.3v




Sent from my iPad using Tapatalk HD

 

[Bullette the Cowdog]

@Newbie
It sounds to me like you need more power & more nic. If you had that you wouldn't need to be taking a drag every second.
You are a candidate for a higher voltage device. And a minimum of 24mg nic juice. You would be amazed & I foresee increased satisfaction for you.

 

[cags]

I'm a chain vaper, no matter what the power or nic is, so I use low nic. what works for me is to have 3 pvs with me at all times. I use joye 510's so it's not a big hassle to carry them around in an old cig case. just another idea

 

[Newbie from PA]

Well that's nice,...Sheeze!
Anyway,...Hopefully the CE(something) will suffice for now.

Looks like I might go with the TWIST...soon?
...(I am sorta a buy the best kinda guy / but right now I'm unemployed),...why not the freakin Lava tube / Digital Voltage setting,....Now I'm talking!

Oh well, (again) hope I can make shift......WHAT MIGHT YOU RECCOMEND for this tough vapor(er)?

 

[SpicyMcHaggis]

I use Vivi Nova tanks and CE4's with great satisfaction. Just as much satisfaction as dripping for me.

 

[Newbie from PA]

5-6 vapes before the battery dies?......?....ya mean 50 - 60?

 

[Newbie from PA]

Well,...I am an Electrician so.....Hmmmmmmmm
....Battery (back pack)
....Juice Helmet
....pull around Generator?,...for starters?
......................................................................I'll show em!

 

[kelleymcm]

I use Vivi Nova tanks and CE4's with great satisfaction. Just as much satisfaction as dripping for me.

TOTALLY AGREE !!! I LOVE mine & @ 3.7 EVEN !!
I have vv's but everything works best for me @ 3.5 - about 4.2 ...over that I get a sore throat.
So we are NOT all high volt vapers ,you'll never know till ya' try HV tho
Twists ROCK BTW ! they are just kinda long ....

5-6 vapes before the battery dies?......?....ya mean 50 - 60?

I do believe....... he meant that they drop off 5-6 vapes B-4 BATT dies & needs recharging .....

 

[TH0MAS CR0WN]

Are you talking about chain vaping a ce3/phoenix?

I've found that it is easily done if every few puffs you do a primer puff or two (quick draw on the ce3 without firing the battery). You'll start to see some air bubbles rise from where the wicks are. When filled properly you shouldn't have any dry hits on the ce3. That first fill really has to be done right though.

 

[Swampey65]

Newbie, I bought the TW branded "Mini-Torpedo" wich is also called the "Lava Tube" by another E-Cig company (Sorry, like you I'm still a Newb so don't recall Company name but I see their banner above here alot) and I have found that it serves me very well.

I wasn't sure at first if Variable Voltage was gonna mean anything to me or not being that I was/am a newb but trust me, IT MAKES A DIFFERENCE! Some flavors at an adjusted voltage just EXPLODE with flavor once vaped at a certain voltage setting (at least I find). Don't get me wrong, I also have the eGo-T and straight 3.7v works perfectly well for all the juices I've used in it so far but, man vv is GREAT!

Good Luck w/ whatever ya choose and most importantly, I wish you good luck in finding meaningful employment. Been there & done that more times than I care to think about!

 

[Tiggi]

I enjoy using a passthrough batteries for chain vaping!

 

[rotohammer]

The only way I can chain vape on a CE2, CE3, CE4 or CE5 is after I mod it with

 

[zoiDman]

The only way I can chain vape on a CE2, CE3, CE4 or CE5 is after I mod it with
View attachment 123296

What kind of Wick are you Using? LOL

I can Chain Vape on my CE2 all I want. As long as I "Tilt" when I do.

 

[rotohammer]

What kind of Wick are you Using?

#1/0 cotton candle wick, separated into individual threads. I can slide 10 threads into a CE3 coil. Let them dangle loose, I leave .25" out, so you have to be careful sliding the tube back on so you dont pinch one.

I'm currently using Vision V3's, I get 12 threads in the coil, and place 12 under the coil.

Loose cotton threads wick awesomely, never a dry hit until the tank is dry.

 

[zoiDman]

#1/0 cotton candle wick, separated into individual threads. I can slide 10 threads into a CE3 coil. Let them dangle loose, I leave .25" out, so you have to be careful sliding the tube back on so you dont pinch one.

I'm currently using Vision V3's, I get 12 threads in the coil, and place 12 under the coil.

Loose cotton threads wick awesomely, never a dry hit until the tank is dry.

Might have to give it a Try.

Do you have a link where you buy the Candle Wick?

 

[rotohammer]

Might have to give it a Try.

Do you have a link where you buy the Candle Wick?

Amazon.com: Cotton Square Braid Candle Wick - #1/0: Arts, Crafts & Sewing