Creating 1.5 - 2.0 ohm on AGA-T2 and Igo-L

[BlackPurple]

Need a help on this one?i want to make 1.5 - 2.0 ohm on my AGA-T2 n Igo-L..
Pls give a suggestion or tips pls..i need a desperate good clouds right now.
Like....example:
AGA-T2: mesh #400, kanthal 30awg, 4 wraps.
Igo-L: Wick 2mm, kanthal 30awg, 4 wraps.
(I just put those inputs on random)

Also,whats the best hole to bore for both toppings.
1.0mm?1.5mm?2.0mm?

Thanks in advance!

 

[aPandaz]

Wrap your wicks and measure the resistance with a multimeter or a mod if you have one that can. I've bored my IGO-L and AGA-S to 1.6mm, you will have to see what you prefer.

 

[FogHawg]

I've been doing a 5/6 wrap w/30g & getting 1.7 - 1.8 Ohms on my T2's. I haven't drilled em out.

 

[pdib]

cut a length of your 30g Kanthal @ 2 1/4". That will give you 1.575Ω. Wrap it onto a drill bit (or whatever object) that is the size of your desired wick (thickness); including legs but no extra. That's your wrap. Now you can cut a length of Kanthal a bit longer for the extra you will need to attach to your posts and snip off after.

EDIT: on the AGA, you might find you are up 0.2Ω, at say 1.7; because the AGA might contribute some resistance too. On the IGO, you oughta be right on.

 

[BlackPurple]

Thx guys! Just get 1.9ohm on AGA n 1.7ohm on IGO..
Really appreciate your help guys..
Thx a lot!

 

[greenman]

I run duel coils on my IGO-L with 34g nichrome 6 wraps on two 3mm silica wicks folded once, comes out to 1.6 Ohms. drilled out my airhole to 2mm. I run it at 5 volts on my provari and it kicks out the vapor.