UD Stick Coil Jig Coiling Rod Cotton Hook Vape Tool - Sliver
https://www.2fdeal.com/search/?Keyword=Stick+Coil+Jig&CateId=
Made from 420 stainless steel, clean & safe.
The UD cotton hook is a good vape tool, it can help vapers to wick and other use. You can use the flat tip to wire and the hook tip to put cotton inside the coils, designed with flat tip on one end and angled point on the other side. The flat end assists the user to wrap the coils while the other end helps the vape cotton into the tanks with precision.
UD Vape Belt Pack Carrying Bag for E-Cigarettes
https://www.2fdeal.com/search/?Keyword=UD+Vape+Belt+Pack+&CateId=
Parameter
Size: 25cm*16.5cm*4cm
Weight: 0.27kg
Features
Material : Oxford Cloth
Vape belt pack with a wide capacity Suitable for E Cigarette Water-proof material
ULTON Tripod 2 Style 316SS 22mm RTA Rebuildable Tank Atomizer 2.8ml
https://www.2fdeal.com/search/?Keyword=23911&CateId=
2.8 ml capacity;
Single coil build deck;
Bottom Filling
Multiple air settings from MTL to RDL.
The Deck
As the deck has been one of the key strengths of the classic Tripod, have kept the same general design with only small tweaks. Focusing on single coil setups, you can see the same high precision large pan head phillips post screws that have been used with its predecessor , conveniently placed rails to capture wire either between rail and screw head / body or around screw body (depending on wire diameter), cut – outs on outer deck rim for easier rebuilding, cut – outs on inner deck rim plus cotton wells to help proper cotton placement and juice distribution along the cotton body, sufficient liquid intake slots on deck sides ( approx. 4.0mm x 2.0mm).
Keeping and changing for the win
Real time access to deck had to be there, and it’s accomplished in an even smoother way. You can access your deck any time you want and check your build, or even change build without dumping the liquid of your tank.
The Air Flow
The big change comes with the real time configuration of the air flow. It have skipped the outdated adjustment via air flow control ring and decided that the airflow should be regulated in a more straightforward way, right under the coil, through fixed air flow tubes. But this, with the ability to swap air flow tubes any time / real time, keeping the build and the liquid inside the tank absolutely intact. You may dial in your air flow via five pin options, with air hole diameter 0.8mm/1.0mm/1.2mm/ 1.5mm/1.8mm respectively, pinned inside a D=4.0mm nest, plus through five air flow tubes with air hole diameter 2.0mm/2.5mm/3.0mm/3.5mm/4.0mm (last one also serving as pins nest), or use no tube and enjoy a perfect, 5.0mm Direct Lung draw.
Removes the rotary air adjustment ring in favor of pins and removable airflow tubes. Accessible at all times, even with a full tank and a resistance mounted, these airflows are placed under the mounting plate. 10 in number (5 Pins and 5 tubes) allow precise adjustments ranging from 0.8 mm to a maximum of 5 mm opening. In addition two chimneys are supplied with the Tripod2, one of them allows use with a restricted air flow while the other will be more effective with more airy settings.
The Drip Tip
Another interesting point is the custom drip tip that comes with the device. This is a two-parts assembly as well, with its two parts sandwiching the Top Cap to ensure extra stability when removing top cap to refill. The drip tip is easily removable to let you use your own 510 drip tip.
https://www.2fdeal.com/search/?Keyword=Stick+Coil+Jig&CateId=
Made from 420 stainless steel, clean & safe.
The UD cotton hook is a good vape tool, it can help vapers to wick and other use. You can use the flat tip to wire and the hook tip to put cotton inside the coils, designed with flat tip on one end and angled point on the other side. The flat end assists the user to wrap the coils while the other end helps the vape cotton into the tanks with precision.
UD Vape Belt Pack Carrying Bag for E-Cigarettes
https://www.2fdeal.com/search/?Keyword=UD+Vape+Belt+Pack+&CateId=
Parameter
Size: 25cm*16.5cm*4cm
Weight: 0.27kg
Features
Material : Oxford Cloth
Vape belt pack with a wide capacity Suitable for E Cigarette Water-proof material
ULTON Tripod 2 Style 316SS 22mm RTA Rebuildable Tank Atomizer 2.8ml
https://www.2fdeal.com/search/?Keyword=23911&CateId=
2.8 ml capacity;
Single coil build deck;
Bottom Filling
Multiple air settings from MTL to RDL.
The Deck
As the deck has been one of the key strengths of the classic Tripod, have kept the same general design with only small tweaks. Focusing on single coil setups, you can see the same high precision large pan head phillips post screws that have been used with its predecessor , conveniently placed rails to capture wire either between rail and screw head / body or around screw body (depending on wire diameter), cut – outs on outer deck rim for easier rebuilding, cut – outs on inner deck rim plus cotton wells to help proper cotton placement and juice distribution along the cotton body, sufficient liquid intake slots on deck sides ( approx. 4.0mm x 2.0mm).
Keeping and changing for the win
Real time access to deck had to be there, and it’s accomplished in an even smoother way. You can access your deck any time you want and check your build, or even change build without dumping the liquid of your tank.
The Air Flow
The big change comes with the real time configuration of the air flow. It have skipped the outdated adjustment via air flow control ring and decided that the airflow should be regulated in a more straightforward way, right under the coil, through fixed air flow tubes. But this, with the ability to swap air flow tubes any time / real time, keeping the build and the liquid inside the tank absolutely intact. You may dial in your air flow via five pin options, with air hole diameter 0.8mm/1.0mm/1.2mm/ 1.5mm/1.8mm respectively, pinned inside a D=4.0mm nest, plus through five air flow tubes with air hole diameter 2.0mm/2.5mm/3.0mm/3.5mm/4.0mm (last one also serving as pins nest), or use no tube and enjoy a perfect, 5.0mm Direct Lung draw.
Removes the rotary air adjustment ring in favor of pins and removable airflow tubes. Accessible at all times, even with a full tank and a resistance mounted, these airflows are placed under the mounting plate. 10 in number (5 Pins and 5 tubes) allow precise adjustments ranging from 0.8 mm to a maximum of 5 mm opening. In addition two chimneys are supplied with the Tripod2, one of them allows use with a restricted air flow while the other will be more effective with more airy settings.
The Drip Tip
Another interesting point is the custom drip tip that comes with the device. This is a two-parts assembly as well, with its two parts sandwiching the Top Cap to ensure extra stability when removing top cap to refill. The drip tip is easily removable to let you use your own 510 drip tip.