Decided on my cleaning method for my carts, drying?

[Brooke1975]

I think I will go with the air drying, sounds easier and no harm will come to the labels!

 

[MacDiver]

I got one of these flavor injectors at Walmart. They carry the same thing at K-Mart too. I used a peice of plastic tubing from the local hardware store. 3/8 inside diameter 1/2 outside. You'll need a small hose clamp to hold the tube at the syringe end. It will clean a 510 atty too.

You can't see it in the picture but where the threaded needle attaches is a knurled peice that screws into the syringe with a silicone washer behind it. The tube slides over it. The tube is nice and snug on a cartomizer. I don't use the included needle.

This bad boy puts out major water flow. I use hot water and jet it through both ends of the atty or cart.

http://www.kmart.com/shc/s/p_10151_...yword=injector&prdNo=1&blockNo=1&blockType=G1

 

[Brooke1975]

I got one of these flavor injectors at Walmart. They carry the same thing at K-Mart too. I used a peice of plastic tubing from the local hardware store. 3/8 inside diameter 1/2 outside. You'll need a small hose clamp to hold the tube at the syringe end. It will clean a 510 atty too.

You can't see it in the picture but where the threaded needle attaches is a knurled peice that screws into the syringe with a silicone washer behind it. The tube slides over it. The tube is nice and snug on a cartomizer. I don't use the included needle.

This bad boy puts out major water flow. I use hot water and jet it through both ends of the atty or cart.

http://www.kmart.com/shc/s/p_10151_...yword=injector&prdNo=1&blockNo=1&blockType=G1

This is an awesome idea! Thanks so much for sharing this, I just might give it a try

 

[ApacheChief]

I just use a box fan or tower fan. If the grill of the fan is the right size I can shove a cart in there and it will stay in place. Then just turn it so mouth piece is down and turn the fan on, usually is 100% dry in under 6 hours.

 

[marydanhayes]

In the beginning, I tried every cleaning method I read about in the forum - vodka, vinegar, lemon juice, mouthwash, and so on. One day I decided I would consider attys short lived and disposable, started just blowing them out when they flooded. That was 3 months ago and I'm still alternating the same 3 attys. Go figure!

 

[MacDiver]

Oh, I forgot to mention I got the idea from Bella. Have to give credit where credit is due. She posted a video on doing this using a turkey baster, which is the same thing as this. I looked for one like her's but this is the only thing I could find that was close to it. Do a search on her name in this fourm and you'll find it. It's really good!

 

[Adrenalynn]

"Belle" will get you further. Her blog is here: VapewithPuff.com

 

[Brooke1975]

Thanks all!