Deciphering device/coils

[pahick]

This was the first device I bought a couple months ago. It never gave me a lot of vapor, but then I never knew about pg/vg ratio, coil ohms, and air flow. I drilled one hole out yesterday and it really woke it up. So now I want to buy new coils. Problem is, I dont know what kind of coil it is. Hopefully I can figure out how to add pics..lol...

 

[Susan~S]

Looks like this is the manufacturer/distributor site. You may have to email them to find out where you can purchase coils as I did not find much online about this product.

 

[pahick]

Wow, hey thanks! I looked for an hour and didnt find much, my searching skills are lacking. Appreciate it!

 

[Shootist]

The coil head looks a lot like the Kanger single or dual coil type other than the bottom part of it.

Can you take a picture of the battery only I want to see what the threads look like.

If they are eGo cone threads any tank system that uses that tread system will work on the battery.

 

[twgbonehead]

It looks like an ego-connector, using evod/kanger-style coils. It would help if you showed the battery without the head on it at all. Eventually you're likely to want to get completely new heads as well.

I'm pretty sure this coil will do the job:

https://www.fasttech.com/products/0...cement-coil-heads-for-evod-clearomizer-5-pack

(Note that these heads come in both short-post and long-post versions, yours looks like a short-post. For reference, compare it to this:

https://www.fasttech.com/products/0/10007819/1684200-replacement-coil-heads-for-mt3-t3s-mt3s-protank

The second one is the long-post style).

Edit:

The head looks a lot like an H2 clearo:

https://www.fasttech.com/p/1594202

 

[gandymarsh]

In addition to the great advice above, you could rebuild the coil yourself and save some money. Lots of videos on YouTube covering that. The coil head looks similar to many bottom coil units such as the Protank and others so any video that covers that type would give you a good starting point.

 

[pahick]

Thanks guys. It has ego and 510? connection. I use a cover and a knock off mini vivi nova at times.



heres a better pic of the coil..



I really dont want to build coils, though I may try. I lack some feeling in my finger tips and small objects are hard to work with.

 

[pahick]

The length is the top post part of the coil shouldnt matter, right? It would just fit higher up in the tube? I believe the kanger evod coils might work, it seems.

 

[twgbonehead]

Thanks guys. It has ego and 510? connection. I use a cover and a knock off mini vivi nova at times.

View attachment 353298

heres a better pic of the coil..

View attachment 353299

I really dont want to build coils, though I may try. I lack some feeling in my finger tips and small objects are hard to work with.

Yep, that's an ego/510 connector. Should fit any head with either ego or 510 threads (which is about 99% of them!).

And that coil is a short-post evod/kanger style. (In case it isn't obvious, by "post" I mean the part that sticks out the top).

Edit:
The longer-post styles won't always fit in place of the shorter-post ones; they get jammed in the tube.

Although I also think there can be slight differences in the diameter of the post as well. There are a TON of different replacement coil heads and while most are compatible, some are just a bit off with regards to the top post. I have some heads that will take either long-post or short-post, others where the long-post won't fit.

 

[Panorama911]

From what I could find it is a C store style brand and my guess is you will need to buy the entire clearomizer rather than the coil. I would just go with another similar style battery such as an Evod or a Vision Spinner and Ego T then get the appropriate tank you desire. The replacement parts for any and all of these are readily available online or at a local vape shop. The results will be a better experience not to mention the ease and options available of replacement coils/tanks.

 

[pahick]

Thanks twgbonehead , ill order some up! Fingers crossed!

 

[pahick]

From what I could find it is a C store style brand and my guess is you will need to buy the entire clearomizer rather than the coil. I would just go with another similar style battery such as an Evod or a Vision Spinner and Ego T then get the appropriate tank you desire. The replacement parts for any and all of these are readily available online or at a local vape shop. The results will be a better experience not to mention the ease and options available of replacement coils/tanks.

I have a Vision Spinner 2, another on the way. PLus I just bought a Smoktech mini 400, and a Vision Spinner 400 on the way too. I have 2 Aspire ET-S BDC's and a knock off? mini vivi nova.




Im just trying to use what I have and not get too much money in it. Though I believe I went past that goal already

 

[twgbonehead]

Do be aware that if you get them from Fasttech it will take a while (although they have great prices!) If you're in a hurry, try to find the same thing from a store in the US. You should be able to find 5-packs for $6 or less.

 

[Panorama911]

Do be aware that if you get them from Fasttech it will take a while (although they have great prices!) If you're in a hurry, try to find the same thing from a store in the US. You should be able to find 5-packs for $6 or less.

I agree.... http://www.discountvapers.com/kanger-replacement-coil-heads/

Excellent service and pricing and not too far from PA.

 

[pahick]

This was the first device I bought a couple months ago. It never gave me a lot of vapor, but then I never knew about pg/vg ratio, coil ohms, and air flow. I drilled one hole out yesterday and it really woke it up. So now I want to buy new coils. Problem is, I dont know what kind of coil it is. Hopefully I can figure out how to add pics..lol...

View attachment 353292
View attachment 353293
View attachment 353294

Update....Just in case anyone has one of these, Discount Vaper has coil heads that fit. I chose 1.8's instead of 2.4 but these are it..

DV BCC Coil Replacement **5 pack - 1.8 ohms

 

[EBates]

I think these are what you are looking for.

https://www.fasttech.com/products/0...d-electronic-cigarettes-atomizer-heating-core

I've run across the issue with the kanger t3s heads not fitting into the chimney on some tanks. Normally EVOD and T3S heads will interchange with no issues. But some of the clone mfgs decided to decrease the tank chimney tube ID so EVOD heads are the only option.

OBTW the atomizer chimney tube of your EVOD atty will fit on a T3 atomizer head

 

[olooko]

Can't you take it to a local vape shop. I'm sure you they can help you out, but it looks like a kanger coil.

 

[pahick]

I guess no one reads my posts??...lol. I said I already bought some.

 

[WharfRat1976]

These should do it: Kanger Protank 2 Coils Mini Replacement Genuine 1 8 2 2 2 5 Ohm Kangertech | eBay

Looks like a PT mini coil...The pics on ebay make them look longer but they are the "stubbys."