Disappointed in CE2? Try this!

[Gummy Bear]

I like um,
Except for their not being on a 510 base (and I want 3.2 ohms of course). @ 4.5 volts they taste burnt, But at 4 volts they are good. And kinda like the CE2s they do taste better the 2nd or 3rd day. Someone said they took the tea bag out ( I don't know what they have against the tea bag) but they said it worked well. And someone else wants to mod them with a SS tube. Go figure, we spent all that time taking SS tubes off of CE2s.

 

[br5495]

Thanks for the info.

I don't know yet, but think the coil maintenance may be a drawback for me. The ones I have now are simple and easy to maintain, and last until the coils burn out. With proper care, they may last for several months. I'm still learning about that.

 

[mwa102464]

The Vortex I'm finding work pretty well, I find using them at lower Voltages is better kind of like less is more for me, running them on a regular Riva 901 650mAh Batt is a perfect flavor/vapor combo for me. I put one on my Provari and tried them at all different ranges from low to high and from the lowest setting 3.3 up to 4v seems to be the best range for flavor with the 3.3 being best for flavor and the 4v giving much more vapor but a bit of a sacrifice on the flavor at that point but still very good, above the 4v flavor lacks. I have to agree with Gummy that the 3-3.2 ohm would probably be excellent in the mid 4's 4v-4.8v. All in all I'm happy with these out of the gate and I'm pretty sure they will only get better as they give us choice of ohm and especially make them in bigger tubes

 

[Turbo]

Are you getting any leaking issues 'mwa'? I have some new ones I've yet to try out; been sick.

 

[Luther]

With the Vortex all I seem to be getting is a VERY plastic taste that makes it unusable.

 

[Gummy Bear]

I have had some leaking and went back to the ce2s.
They were not leaking at the plastic tube but from the bottom of the threads.
When the juice wicks down to the coil there is no way to tell ti to stop wicking. If you are hitting it heavy it's OK but after sitting for a few hours it runs out the threads where it should be getting the air from.

 

[br5495]

I have had some leaking and went back to the ce2s.
They were not leaking at the plastic tube but from the bottom of the threads.
When the juice wicks down to the coil there is no way to tell ti to stop wicking. If you are hitting it heavy it's OK but after sitting for a few hours it runs out the threads where it should be getting the air from.

That settles it, then. I'll just stay with the C-E2's and not mess with the Vortex.

 

[Gummy Bear]

The theory is great. I liked the taste (other than it needs to be 510 & 3.2 ohms) They were so easy to re-fill that I didn't use a tank (even tho I modded one for my tank with in the 1st 10 mins). I just added some juice to a Visine bottle that I use to use for dripping and filled as needed. however, the small leaking just became a problem. Some were worse than others.

 

[mwa102464]

yup I ditched them, not a quality vape to me after using them for a while compared to others, now been using the dual coils for the last 2-3 days and there interesting but taste is lacking with these too. I'm an Atty guy and enjoy my Iken HV-510 3.5 ohm Attys at 6v now this is a great vape all the way around, I've been running these for months with a bottom feeder and there is no better vape I have found as of yet than this set up, bar none its the best for ME !

 

[Gummy Bear]

I'll try the fluxomizers when they get them back in stock just to see if they are worth it.

 

[slin]

I didn't have much luck with Ego T or Vortex. I've tried them both and very much disappointed. No flavor, burning taste at 3.7v. I like Ce2 better and better. What a waste of 30 bucks on Ego t and vortex.

 

[arry]

YouTube - ARRY TANK Fitting Clearomiser CE2R5 XL http://arrystank.yolasite.com/

 

[Gummy Bear]

Ary,
That's the ticket,,, DIY.
that is what this thread is all about.

 

[arry]

all made by myself

 

[Turbo]

Very nice work 'arry'. Looks like acrylic rod that you turned for the tanks?

 

[Curvychic]

Do you sell these by any chance???? I'd be super interested in one!!!

all made by myself

 

[arry]

Do you sell these by any chance???? I'd be super interested in one!!!

I dont
but see-

Clearomiser tank Available from
ARRY Tank
CLEARO Tank - Moju Republic
ELiquid and Electronic Cigarettes. — UK-Eliquid

 

[Gummy Bear]

Do you sell these by any chance???? I'd be super interested in one!!!

Just curious,,,
would anyone be interested in "Gummy Tanks with thick wall colored Pyrex hard glass and gold plated end caps with Viton rubber "O" rings
This combo should be the highest quality and safety.
or
Do you guys just want the cheapest tanks that you can get.
(sorry, but I can't do both)

 

[Curvychic]

Me! Me! Me!! But how much are we talking here? LOL

Just curious,,,
would anyone be interested in "Gummy Tanks with thick wall colored Pyrex hard glass and gold plated end caps with Viton rubber "O" rings
This combo should be the highest quality and safety.
or
Do you guys just want the cheapest tanks that you can get.
(sorry, but I can't do both)

 

[arry]

And the tubeing? Is that 3/4" OD x 5/8" ID CLEAR ACRYLIC TUBING 6 FT LONG TUBES - eBay (item 190477788690 end time Apr-07-11 09:18:26 PDT)

No I am in the UK so I use metric only ..
P.s I dont use Acrylic either its not very strong tends to shatter and crack ..

Regards