Discussion thread for the ProVari™ V2.5 - Special Limited Edition Titanium

[DPLongo22]

I like the old designs (2 & 2.5).
I like the old extender caps.
I like the BIG LED display!
I like the Titanium.

My only saving grace MIGHT be that they didn't offer that cap. Phwew! That was close. But I'm standing strong.

Sell out, please.

 

[ENAUD]

I like the old designs (2 & 2.5).
I like the old extender caps.
I like the BIG LED display!
I like the Titanium.

My only saving grace MIGHT be that they didn't offer that cap. Phwew! That was close. But I'm standing strong.

Sell out, please.

They do still have some gun metal grey caps in stock I am thinking of grabbing one just because

 

[DPLongo22]

They do still have some gun metal grey caps in stock I am thinking of grabbing one just because

Stop that. STOP IT RIGHT NOW!!!!

 

[HBcorpse]

Well you mentioned car manufacturers, and also mentioned perhaps a new square base for the Provari....so I tan with square wheels on cars.....LOL

People would then complain about it fitting in their pockets, etc.

The only reason they probably didn't make a titanium extension cap was probably cost, not to mention that with extension rings you can use the stock cap.....

Tell me you're joking?
Please tell me you're joking.
C'moooon...joking right? I'm getting worried here...
It seems you didn't understand that I was clearly talking about the sharp edge of the standard cap vs. the extended cap?
I can only assume you were joking...?
I mean, have I really come off as such an imbecile, that you would actually think I was talking about a SQUARE shape cap?!?
Ooo-gah boo-gah!!!!
[emoji12][emoji12][emoji12][emoji12][emoji12][emoji12][emoji12][emoji12]
Yes, I said "squared edge" but that's one of the many proper terms to describe how the flat, non-rounded standard Provari battery cap looks...
It's a proper term, because if you put a square on it, it's square...meaning across the bottom of the cap, then up the side of the tube...
I am, of course referring to an L-shaped tool used for countless trades and projects. See picture below.

Sorry...not trying to be a c-nt about this. I just wanted to make sure we were on the same page.

 

[HBcorpse]

And if one doesn't like the squared edge

they can do this

I'm more than SURE you were joking.
If not, see above.
[emoji12][emoji12][emoji12][emoji12][emoji12]

 

[milehigh970]

Must.. Resist.. The temptation!!

 

[HBcorpse]

Must.. Resist.. The temptation!!

It's next to impossible!
I'm a YES one minute, and a NO the next...

 

[rondasherrill]

I'm just hoping the stock holds out a LITTLE longer. I'm $60 shy at this point. You all know you don't REALLY want it right?

 

[Pinggolfer]

Oh please lets not go into the volt vs. wattage thingy....

Ok..OK why does my ZNA with the Evolv chip set vary the voltage when I set the wattage?

Sheesh....okay..okay....

You cannot adjust wattage without varying voltage, simply ohms law....I know I will get a ton of flack on this but the only reason VW is offered in any American chip set now is because the imports have been doing it for a few years....

IT'S A MIND GAME!

(It's really a marketing game)!

Wattage is a measurement of electrical load.
Volts is the amount of electricity placed on or in a circuit.
Amperage is the flow of the electrical load.
Resistance well it's resistance.

Who cares anyway?

Does it look good, does it vape good, do you like it?

Are you satisfied with what you purchased?

Please lets not revisit watts vs. volts vs resistance, it's a moot point...

It's kind of like opinions, everyone has one, unfortunately things like laws of physics and laws or principals of electricity have been proven and it is what it is, regardless of my or anyone's opinions.

PEACE

I was simply stating how some of us enjoy just setting the volts and not wondering what the watts are, Isn't that the way we started vaping with the ego, and progressed to the ego twist?

The Provari's we now own allows us to set the volts for taste. If we put the volts up to high for the atty it won't fire. If we put the battery in wrong it won't fire or blow out the chip. It's safe and easy to use and they will sell out of both versions. I don't care about watts or what the Chinese make.

 

[yellowrider]

Well it's here..
It's definitely lighter, has the ti dullness to it..
Only complaint is that button is pretty stiff and they probably could have made the hole bigger as my button is getting chewed up already.. I guess I will talk with provape... sigh...
Edit: Yep it's going back.. The button I found to be too annoying to use.. Just submitted a ticket..
Their CS is top notch, but this is really disappointing on a 270 dollar 2.5.. And no this will not just go away by depressing it 100's of times.. Hopefully the rest of you do not run into this issue.

 

[BadTrainDriver]

Damn...sorry to hear about your troubles...I'll definitely be on the look out for that problem.
I'm actually surprised you're having that problem, seeing how many steps they take in their quality control.

I'm also disappointed you got yours before me...I ordered at the exact time they went on sale, and I won't have mine until Monday.
Jealous!!

 

[milehigh970]

My new black satin was the same way. And the button wouldn't spin around freeley, it would stop. I been just spinning it to a loose spot and still using it. I noticed last night it will spin pas the tight spot now. So it is getting better. If I didn't have to leave tomorrow for 2 weeks for work I would have sent it back.

 

[ItTechy]

Tell me you're joking?
Please tell me you're joking.
C'moooon...joking right? I'm getting worried here...
It seems you didn't understand that I was clearly talking about the sharp edge of the standard cap vs. the extended cap?
I can only assume you were joking...?
I mean, have I really come off as such an imbecile, that you would actually think I was talking about a SQUARE shape cap?!?
Ooo-gah boo-gah!!!!
[emoji12][emoji12][emoji12][emoji12][emoji12][emoji12][emoji12][emoji12]
Yes, I said "squared edge" but that's one of the many proper terms to describe how the flat, non-rounded standard Provari battery cap looks...
It's a proper term, because if you put a square on it, it's square...meaning across the bottom of the cap, then up the side of the tube...
I am, of course referring to an L-shaped tool used for countless trades and projects. See picture below.

Sorry...not trying to be a c-nt about this. I just wanted to make sure we were on the same page.
View attachment 376768

You are fine....I was just in a silly mood.....

I honestly did understand what you had meant....

What's really interesting is no one has discussed the actual weight difference between the Titanium and the SS...

In the Mini there is only a bit over an ounce in weight difference!

Like I said to someone else, for me it is vanity vs. sanity...I have spent more on vaping goodies in the last week than the TI mini with extra caps and an extra years warranty...

If I REALLY wanted one I would buy it...I am just having a hard time with the price, not to mention I already own 2 mini' and 2 regular 2.5'...

Now a P3 in Titanium....well there is a thought!

Then as posted a year or so ago; The Darth Vader Limited Edition: Provari on one end, light saber on the other!

LOL

 

[DPLongo22]

You are fine....I was just in a silly mood.....

I honestly did understand what you had meant....

What's really interesting is no one has discussed the actual weight difference between the Titanium and the SS...

In the Mini there is only a bit over an ounce in weight difference!

Like I said to someone else, for me it is vanity vs. sanity...I have spent more on vaping goodies in the last week than the TI mini with extra caps and an extra years warranty...

If I REALLY wanted one I would buy it...I am just having a hard time with the price, not to mention I already own 2 mini' and 2 regular 2.5'...

Now a P3 in Titanium....well there is a thought!

Then as posted a year or so ago; The Darth Vader Limited Edition: Provari on one end, light saber on the other!

LOL

I want a light-saber one!!!!

 

[ItTechy]

I want a light-saber one!!!!

I would have to look back but I think it was called:

The Darth Vaper Limited Edition

 

[HBcorpse]

You are fine....I was just in a silly mood.....

I honestly did understand what you had meant....

:wipes sweat from brow:
And I'm just gonna apologize now...I was in a c-nty mood when I wrote that.

 

[DPLongo22]

:wipes sweat from brow:
And I'm just gonna apologize now...I was in a c-nty mood when I wrote that.

You gotta lighten up, HB. All that stress will make your handle a prophetic one. Life's too dayum short to take all this stuff so seriously.

Because I care.

 

[HBcorpse]

You gotta lighten up, HB. All that stress will make your handle a prophetic one. Life's too dayum short to take all this stuff so seriously.

Because I care.

Thanks Longo...
I think I've got to leave my forum-ing to earlier in the day, or the weekends, when I'm not just getting home from a long day at work.

 

[DPLongo22]

Thanks Longo...
I think I've got to leave my forum-ing to earlier in the day, or the weekends, when I'm not just getting home from a long day at work.

Anytime, HB.

 

[HBcorpse]

It's been nothing but beer, Legos, and Johnny Cash tonight!
Do I know how to relax or what?
Edit: vape implied.