What I would like to know is if I can, starting with a 54mg 100ml bottle of nicotine premix with dilutant and have a large unflavored bottle of liquid waiting for flavor? Are there any drawbacks to this method as opposed to making smaller quantities at a time? I am going to work down to about 13.5mgs at the end about 400ml of unflavored fluid then add flavor making about a 10mg or so depending on the strength of flavor I am looking for at that time.
- Status
So your going to take 100ml of 54mg nic base and turn it into 400ml of 13.5mg nic base by adding a dilutant. Then just add flavoring to taste to bring it down to 10mg e-juice per bottle. Thats pretty much spot on. There are no drawbacks if you store it properly. Some people freeze it, others put it in the fridge.
Just make sure your not getting charged an arm and a leg for your 54mg nic base. I go here..
Our Unflavored Smoke Juice (Nic. Juice, Nicotine Juice) - My Freedom Smokes
Just make sure your not getting charged an arm and a leg for your 54mg nic base. I go here..
Our Unflavored Smoke Juice (Nic. Juice, Nicotine Juice) - My Freedom Smokes
Last edited:
It is also vital you are using a e-liquid DIY calculator. If you are not already... here is a link! 
http://download.cnet.com/eJuice-Me-Up/3000-18494_4-75222193.html
http://download.cnet.com/eJuice-Me-Up/3000-18494_4-75222193.html
MyFreedomSmokes is so a few months ago. Get your supplies from Wizard Labs for MUCH cheaper.
I could sit here and type out what you need to know, or you could just go to my blog, The Vaper's Handbook and there's everything you need to know right there:
http://www.e-cigarette-forum.com/forum/blogs/shoganinja/2998-vapers-handbook.html#comment5864
they also have some really good customer service. i will order more of my diy from them when needed here is my post on them http://www.e-cigarette-forum.com/fo...ussion/323348-very-good-customer-service.html
Last edited:
thats because people over complicate it.....if you vape lets say 12mg nic then buy some 24mg base and some VG or PG and mix equal parts (i mix 10 mil bottles) 4.5ml nic 4.5ml base and you have 9 mil then you add the flavors i usualy mix at about 10% or 1ml to a 10ml bottle.
4.5ml nic
4.5ml base
1ml flavor
this is where the fun comes in if its too strong then dump a half ml out and add straight base and next time you add only .8ml flavor....its not rocket science and everything doesnt have to be measured to the half drop like a lot of the "guru's" on here try to make it sound. if its too strong (flavor OR nic) add base and if its too weak then add a little more flavor. next time you mix it cut back on the strong bits a little and you will eventualy find a mix that is to your taste. i mix my own for about .75 for a 10ml bottle. when your develloping your flavor use straight PG or PG and save the nic for when you get the creation perfected........happy vaping
- Status
Similar threads
