Does any mod fit a kanger t3

[fett701]

Is there any mod that accepts a kanger t3 without an adapter? Was looking at a vamo but i have heard rumors that a zmax will fit a t3 without adapter. What do i buy and where?

 

[iuwg1vet]

My Evic works with Kangers.

 

[Zarapa]

It will not fit the Zmax without a 510-ego adapter. At least not in mine.

 

[LeftCoastVaper]

I think the YJ 2.0 will work, but I wouldn't recommend those to my worst vaping enemy...

 

[stebru2]

Vamo with adapter

 

[eidikos]

Evic

Sent from my GT-I9000 using Tapatalk

 

[dam718]

eVic is the only one I know of... I think, MAYBE, the new Innoken SVD will work without an adapter as well... Could be wrong on that one

 

[cool breeze]

My eVic accepts a T3 without an adapter. If you like the T3, you should probably check out the Kanger EVOD. Same basic bottom coil concept as the T3 with some improvements.

 

[crxess]

eVic - Sigelei Zmax rev3

 

[tnt56]

If you get the eGo to 510 adapter you can use it with all the 510 threaded mods. May look a bit strange but it works.

 

[Jonny5000]

It doesn't work directly with SOME evic's.

 

[crxess]

It doesn't work directly with SOME evic's.

Your statment should read - Some don't work directly on eVics. The post is set to high.

This is a slight manufacturing error in assembly of the T3 not a problem with the eVic.
A slight center pin pull on the T3 corrects this.

 

[denali_41]

k-100 no adapter

 

[jnnfrlsw]

The 1st version of the Vamo needs an adapter for the T3 to fit. The newest Vamo version has the right connector so my T3 works fine on my Vamo. Having a 510 to Ego adapter in ones vape kit is always a good idea though.

 

[fett701]

Got a sigelei zmax v3. Kanger t3 fits perfect.

 

[Keyboard Fool]

definately evic

 

[jackleg]

Got a sigelei zmax v3. Kanger t3 fits perfect.

I have a zmax also and only 1 of my t3's will fit and I had to sand on it..wth.

 

[paddymx]

Anyvape CVI, out of stock everywhere, will work. But, regardless of any of the others which I haven't tried, if the knurled bottom of the T3 is covered by the "well" you need to be cautious when removing the T3. Otherwise you might spill your juice. The new CVI's have a removable top cap that gives you access to the bottom of the T3 now. For this reason I always use the 510/ego adapter on my early version CVI which kinda negates the "anyvape" concept. The only problem with the adapter is it makes for a little airy draw, but, still acceptable to me. Others have covered one or two of the T3 air holes with nail polish for the airy problem.