dripping help

[legendary]

im going to buy an rda,i was thinking 1 of these: kayfun,nimbus,eviva,CCI Militia...i want hit and a cloud...what are y suggesting?

 

[Goldleadr95]

Are you using a mod or the good old ego batteries

 

[FallenRawToast]

a kayfun is not a dripper, unless you buy a conversion kit for it.

So you want clouds more than flavor?

 

[legendary]

i have a hatch mod but i think i have to buy too a mech mod,also i need great hit and a cloud of smoke...

 

[edyle]

im going to buy an rda,i was thinking 1 of these: kayfun,nimbus,eviva,CCI Militia...i want hit and a cloud...what are y suggesting?

Actually, on mine if I take out the tank and the piece above, and the fog chamber with chimney, I'm left with a dripper.

 

[vapero]

I guess there is a language barrier here...
what is a hatch mod?
you will need either a mech mod or a regulated one, you can blow clouds on both

as for drippers there are hundreds of them. start with a simple 3 post design with adjustable airflow
you could try any of these, but as I've said there are a LOT of options
$8.37 Quasar Style Rebuildable Dripping Atomizer - stainless steel at FastTech - Worldwide Free Shipping
$10.29 Zenith V2 Style Rebuildable Dripping Atomizer - stainless steel / stainless steel AFC ring at FastTech - Worldwide Free Shipping
$7.41 Stillare Storm Style Rebuildable Dripping Atomizer Kit - stainless steel at FastTech - Worldwide Free Shipping

you will need the usuals
kanthal
cotton/rayon
batteries
multimeter
charger
juice
ohms law calculator
ohms law education

 

[legendary]

I guess there is a language barrier here...
what is a hatch mod?
you will need either a mech mod or a regulated one, you can blow clouds on both

as for drippers there are hundreds of them. start with a simple 3 post design with adjustable airflow
you could try any of these, but as I've said there are a LOT of options
$8.37 Quasar Style Rebuildable Dripping Atomizer - stainless steel at FastTech - Worldwide Free Shipping
$10.29 Zenith V2 Style Rebuildable Dripping Atomizer - stainless steel / stainless steel AFC ring at FastTech - Worldwide Free Shipping
$7.41 Stillare Storm Style Rebuildable Dripping Atomizer Kit - stainless steel at FastTech - Worldwide Free Shipping

you will need the usuals
kanthal
cotton/rayon
batteries
multimeter
charger
juice
ohms law calculator
ohms law education

im going to buy an ohm meter but how will i check my battery in a mech mod? also im not into the drippers that y send me,they look like fake...btw thanks for help but if im going to buy a dripper i need something good...can y show me something better?what about drippers that i said before?

 

[retic1959]

a kayfun is not a dripper, unless you buy a conversion kit for it. So you want clouds more than flavor?

You don't need a conversion kit to use a kayfun as a dripper , you remove the chamber , chimney and the top tank section and run your wick to the floor of the tank and drip away , simple .

 

[retic1959]

im going to buy an ohm meter but how will i check my battery in a mech mod? also im not into the drippers that y send me,they look like fake...btw thanks for help but if im going to buy a dripper i need something good...can y show me something better?what about drippers that i said before?

You need a multimeter to check battery voltage or a regulated mod that has that feature .

 

[vapero]

those are great clones of great drippers, you could search for the authentics and will work the same

either of the ones I sugested have a similar design as the drippers on your list but have the plus of being able to control the airflow
your dripper options
CCI Militia = a simple 3 post dripper but with no air flow control so you can't adjust it
nimbus = a simple 3 post dripper but with no air flow control so you can't adjust it
your non dripper options
kayfun =not a dripper, it is a vacuum bottom fed tank, good flavor but not much vapor as a dripper
eviva = it is a tank that is hard to build and needs resistance and non-resistance wires

 

[legendary]

You need a multimeter to check battery voltage or a regulated mod that has that feature .

why should i check my volts?

 

[vapero]

why should i check my volts?

yes, you should check the volts on your battery so you know when to charge it again, and not over discharge it and ruin it

 

[legendary]

those are great clones of great drippers, you could search for the authentics and will work the same

either of the ones I sugested have a similar design as the drippers on your list but have the plus of being able to control the airflow
your dripper options
CCI Militia = a simple 3 post dripper but with no air flow control so you can't adjust it
nimbus = a simple 3 post dripper but with no air flow control so you can't adjust it
your non dripper options
kayfun =not a dripper, it is a vacuum bottom fed tank, good flavor but not much vapor as a dripper
eviva = it is a tank that is hard to build and needs resistance and non-resistance wires

my friend gave me The dripper,is it worth to build him or waste of time?

 

[vapero]

why should i check my volts?

don't get me wrong here, but you need to learn a lot before starting, that way you would know what you need and do it safely.

you could get a good regulated device (hana, vaporshark, flask, ipv) or a similar 30+watt device and not really have to worry about ohms or your battery voltage

if you go to either a regulated device or a mech you need to build your coils accordingly to get the most out of it.

it's really hard to give the correct advice y you aren't really sure of what it is that you are asking (kayfun and eviva as drippers)

if you have any questions please ask I'll try to help out and there are others here that do chime in and help also

 

[vapero]

my friend gave me The dripper,is it worth to build him or waste of time?

if you have it, build it, it is suposed to be a flavor rda and not a cloud one

what mod or battery are you using?

 

[legendary]

ok forget about eviva and kayfun ,my wrong they are for flavour junkies as they say ,i want to spend 40-50 euros to somthing good,can y saw me?i read a lot and i undrestand that mech mod is better,it gives y more power but y must be carefoul...

 

[legendary]

if you have it, build it, it is suposed to be a flavor rda and not a cloud one

what mod or battery are you using?

HATCH Mod 18650 VV Chrome Variable Voltage

i build it 2-3 times but the ohm went wrong i made 3.0ohm i dont know what did i do wrong,but dont change the topic

 

[vapero]

well on that mod you should build your the dripper at 1.6-1.8ohms

that out of the way you won't get a dripper and a mod for 40-50 euro unles you go the clone way (I love my clones and work amazingly well)

if that is your price for just the dripper you have a few options
mutation x is really similar to the CCI millitia and is about $30-$40 USD (it really is a clone of the tobh atty but they say it isn't a clone)

i read a lot and i undrestand that mech mod is better,it gives y more power but y must be carefoul...
not really (I use mechs 100% of the time) but you really can get more power with the new regulated devices 100-180W,

I prefer mechs because they give me the power I need on a much smaller device and lower price ($10-$25) for a mech clone

you want a powerful and great quality combo (clone) total USD$37
$26.26 Stingray X Style Stainless Steel + Copper Mechanical Mod - 18350 / 18500 / 18650 at FastTech - Worldwide Free Shipping
$10.34 Mutation X Styled RDA Rebuildable Dripping Atomizer - stainless steel / 22mm dia. at FastTech - Worldwide Free Shipping

if you go for authentics total USD$100
Mutation X RDA Rebuildable Atomizer by Indulgence
Super T ~ WorkHorse

 

[legendary]

nice options,how about the trident and the patriot?i think they dont have adjustable airflow but i dont think its something to worry,or not?and http://www.fasttech.com/products/3027/10009160/1700803-nemesis-style-mechanical-mod is still good right?1 more guestion what the difference between a clone mod with an original becasue the price is ....ing crazy...

 

[vapero]

if you are just starting dripping you want more air, but you will learn when too much is more than you will like. with the stock holes you will get little airflow an thus not that much vapor so you will need to drill a bit more, but if you overdo it you won't like it and you just ruined your rda, so with AFC (adjustable airflow control) you will find your sweetspot really easy and once you have it you won't need to have AFC, I have a lot or rdas that don't have the AFC but I know exactly how much I need to drill them and works the same.

both of those rdas are good, but are last year top models, now there are much better designs (AFC, deeper juice wells so more juice capacity, domed caps for better flavor, bigger post holes so it is easier to build etc)