Dripping vs tanks

[Vamoman]

I have been using all sorts of tanks thus far the latest was the pt2. Loved it for about a week before it started acting up. I have now moved to dripping exclusively. I find it a much better vape and very good flavor. I have been playing around with micro coils and im very happy with them. Here is a pic of my latest wrap.
The reason for tjis post is to find if there are any other exclusive drippers

Sent from my GT-I9500 using Tapatalk HD

 

[Matthee]

Those coils are works of art, Vamoman. I am still using tanks, but after a lot of reading decided to go the Grand Reo with Reomizer route. They say its as good as dripping without the hassle. Shall see. But all agreed dripping is a better vaping experience than tanks. Which rba are u using? And wire? And wicking material?

 

[Vamoman]

Im using 28g a1 kanthal with 100% cotton in the chimbus

Sent from my GT-I9500 using Tapatalk HD

 

[durianeliquidflavorplease]

Dripping indeed offers the best vaping experience for me. I've grown used to the hassle of dripping juice into the atty quite often--can't have your cake and eat it too. And BTW, those are nice-looking dual micro-coils. Have you measured the resistance?

 

[Vamoman]

Thanks man . They are .6ohms

Sent from my GT-I9500 using Tapatalk HD

 

[potholerepairman]

direct dripping is very tough for any setup but a good bottom feeder to give you,imo.Safety long term may be better too, nothing to wick upon.that said last time at an event with pv users 99% had tanks of some sort.

 

[Waverunn3r]

Something I've always wondered... how pocket safe is a dripping mod?

 

[Vamoman]

Mine is in my pocket all the time. No issues.

Sent from my GT-I9500 using Tapatalk HD

 

[NicoHolic]

Dripping indeed offers the best vaping experience for me. I've grown used to the hassle of dripping juice into the atty quite often--can't have your cake and eat it too...

Actually, you can... with a bottom fed rebuildable dripping atomizer such as the Reomizer 2 on a REO Grand. With a 6 ml bottle and 18650, you can "drip" all day long, even when driving. The best of vaping, dripping, in a business card-sized mod no larger than a pack of regular length filter cigarettes. It's all I carry--no spare juice or battery needed, even for a long day. No tilting or inverting the mod required--did enough of that trying to keep CE4 wicks wet. No worry about leaking in a pants pocket. It just works...awesomely.

 

[Zegee]

Dripping is the business , my first attempt cotton coil dual running .6 on a k100 with a nimbus.

Thanks for the intro vano

Sent from my GT-I9500 using Tapatalk 4 Beta

 

[Vamoman]

Lekker did u drill out the holes

Sent from my GT-I9500 using Tapatalk HD

 

[Matthee]

Hi Vamoman and Zegee. Following this thread with interest. Great cloud there Zegee. Have tried a microcoil with cotton (organic cotton balls from Dis-Chem), but the taste was horrible for me. What cotton do you guys use? Do you first torch the wire?

 

[Zegee]

Hi Vamoman and Zegee. Following this thread with interest. Great cloud there Zegee. Have tried a microcoil with cotton (organic cotton balls from Dis-Chem), but the taste was horrible for me. What cotton do you guys use? Do you first torch the wire?

Hi mathee the trick for me was to add vg to liquid also never oxidised wire.just make sure cotton always moist I watched it disintegrate.

@vano drilled exisiting hole bigger 3mm and pulls like a champ.

Waiting for safer batteries though maybe go 3.5mm

Sent from my GT-I9500 using Tapatalk 4 Beta

 

[Matthee]

Thanks Zegee, have since used rolled cotton as opposed to cotton balls. No bad taste, but then I also did not torch the wire beforehand, so that could also have been the problem. An any case the rolled cotton works more easily for me as well.

 

[MrPloom]

You all have inspired me to try 100% cotton! Cheers

Sent from my SCH-I545 using Tapatalk 4

 

[Vamoman]

Another one I built tried different angles and this one worked out good 1ohms producing clouds!!!

Sent from my GT-I9500 using Tapatalk 4

 

[Matthee]

Looks great. Have seen a similar vertical configuration on the forum, but in a V (funnel) shape with the narrower part towards the bottom. Vape on!