The costs of running this huge site are paid for by ads. Please consider registering and becoming a Supporting Member for an ad-free experience. Thanks, ECF team.

DSE-701 review X3

Discussion in 'E-Cigar models' started by tinstar15, Jan 6, 2010.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. tinstar15

    tinstar15 Super Member Verified Member ECF Veteran

    Sep 29, 2009
    Lakeland, FL
    Okeedokie, I now have two nice new shiny DSE701's.

    One I picked from a local supplier as a backup to one I purchased roughly 2 months ago from the same guy (flea market). The other I picked up at for $24 bucks IIRC.

    Both are identical to my original and each other. All three came in a presentation box, lined with foam. Each came with 5 pre-filled carts, two 10440 Lithium-ion rechargable batts, charger w/ US adapter, instructions (Chinglish), and a little QC card with the model number on it.

    To start with, all three have been tested and function. The first one has been in use for about 2 months and is still running strong. Runs smooth with a nice even easy drag. The others have only been in use for a few hours since I picked them up around noon.

    The cart filler is glued into the carts. The carts are attached by crewing them onto the cigar body. The white section of the cart freely rotates on the whistle-type mouthpiece and is a snap on fit. The carts have screw on covers which seal on a o-ring near the ends of the mouthpiece threads. This o-ring also insures that the cart won't back-leak onto the user when its attached to the cigar. The cart and its cover fit inside a wood grain bullet shaped carrier.

    The battery end of the cigar has a clear, knurled cover with a brass threaded section. Its hollow and contains no functional parts. The LED is inside the cigar body and is EXTREMELY difficult to see outdoors or in well-lit areas. In lower light, the led is visible through the cover and through a small hole near the end of the cigar. This is a sort of witness hole for viewing the LED status light and, if you push a pin into it, is used to manually engage the atty for cleaning.

    The cigar bodies are metal with a painted on wood grain finish similar in pattern to the allen wrench assembled furniture you see at Wal-mart. At a distance, it could possibly be mistaken for a cigar but at close range it looks like your sucking on a dowel rod with brass rings.

    As far as function goes, my first one broke-in in less than a day or so. The two new ones are just starting to settle in. Vapor production from my original is astonishingly good and almost up to 601 e-pipe level with excellent flavor. The newer ones aren't bad in the vapor area right now but nowhere near the broken-in one. All three came with the standard level of primer in the attys which took about 20 mins to fully eliminate.

    As for factory cart flavors....some might like it but to me it's horrid stuff. Rinsing and cleaning carts with glued in filler ain't easy and it would appear that these carts are good candidates for fish tank filter foam. The carts have plenty of room and should keep a heavy vaper going for at least an hour or two. I'm not a chain vaper most of the time, but I use them often. They take me around 5 hours to dry out.

    The batteries last me approximately 3-5 hours depending on intensity of use. They only take approximately 30-45 mins to charge.

    If you are looking for a cheap PV and don't have the bucks for a mod, these would probably suit you. Considering that the one I got from BigBox was only $24, it isn't all that bad. Downside to any order from a Chinese site is the shipping. It's like $15-20. Since I ordered a cigar, another e-pipe, a cheapo camera, MP3 player, and a few LED computer lights, the price of shipping doesn't seem so bad. Another downside is that it takes a while to get to ya. Ordered on 12/20/09 and received today (1/5/10). They also didn't seem to take much time with packaging, just cramming everything into a box without much to protect it aside from a wadded up handfull of bubble wrap. Nothing was dented or beat up and everything worked so I guess I shouldn't gripe.

    Hope this helps.
  2. tinstar15

    tinstar15 Super Member Verified Member ECF Veteran

    Sep 29, 2009
    Lakeland, FL
    Well, as Murphy's Law would have it, I just buggered up one of my nice new cigars. I was getting in the car and apparently failed to notice that it had fallen off the seat. It fell between the door and boom. Broke out the jewel cap and creased the entire length of the cigar. I was able to salvage the battery but thats it.

    So, being stuck with a bent up cigar, I figured I'd just go all the way and tear it down to see what was inside. The parts came out after cutting away the outer shell.

    The air intake appears to be regulated by a set of silicone flaps which apparently are designed to keep juice from entering into the battery compartment. There is a small circuit board which was sealed inside the innermost portion of the white battery housing. Another board is unsealed and near the opening area of the battery compartment. It has two LEDs, one green and one red. The wires are secured and shielded along the white plastic battery housing with some sort of white latex-like glue. The atty has a silicone sleeve around it to act as a seal between the cartridge compartment and the inner mechanisms.

    Between the intake valve and the battery compartment, I noticed a small filament inside a very fine glass tube. Attached to this were a small set of connector leads and a small silver metal magnet. I'm guessing this is the switch which controls the atty, causing it to fire up when air is drawn in. Unfortunately the area suffered a severe amount of damage when I slammed the car door on it.

    It would appear that, for the most part, anything that could be damaged by submersing the cigar body in fluid (like PGA for cleaning purposes) would be unharmed by the procedure. The only part which could possibly be damaged would be the small LED board near the cleaning/vent hole on the cigar body near the jewel cap. This is probably unlikely but I suppose it's possible.

    Dammit, I just got this thing. I should have used my old one today.
  3. gjrhine

    gjrhine Super Member ECF Veteran

    May 18, 2009
    Sunny South Carolina
    I have been using my 701 for a year now and it is still great. I just keep recharging and filling the cart, no problem.
  4. DaSmokinLoon

    DaSmokinLoon Senior Member ECF Veteran

    Jan 30, 2012
    Brainerd, MN
    I realize these are pretty old posts, but they were very helpful, just strengthened my resolve to purchase the DSE701, I'm so excited I cant wait!
  5. Petej

    Petej Senior Member ECF Veteran

    Apr 30, 2012
    Bellingham, WA
    I just got a DSE701 a couple weeks ago. I love it! Great vape indeed. Get some flavors though as the juice that comes with it is pretty bland.
  6. Ronaldo

    Ronaldo Full Member Verified Member

    Apr 22, 2012
    I'm chiming in kinda late too, but for the benefit of any new or potential 701 vapers, the Kuwako pipe bowl from Janty fits it. Looks kinda cool as a pipe.
Thread Status:
Not open for further replies.

Share This Page