Dual Coil 510 Cartos

[VPDownunder]

Has anyone tried these in their UFS? I ordered some to try out but I don't know whether they'll be too long, they're a mega carto so they're longer than normal but I'm hoping they'll end up the same length as a normal 510 with the extension piece on.

 

[Stownz]

The dual coils are cartomizers, not atomizers. UFS uses atomizers.

Here is a pic of the dual coils on lots of mods, there in the middle is the GGTS +dual coil. These things are rated at 1.5 ohm but are AMAZING at 6 volts. Still not better then the UFS though +ciso attys.

UFS + Cisco 1.8 ohm 510

 

[VPDownunder]

I realise they are Cartos, I can't see any reason a 510 carto wouldn't work in the UFS like the 808 in the AVS.

 

[Stownz]

Because they are 2x as long.

 

[VPDownunder]

Ah, I see they're longer than they looked. Thanks

 

[imeothanasis]

Maybe I will make a small metal thing to fit on the UFS top cap to allow the use of longer atomizers or cartos with a mouthpiece of your choice guys

 

[AldoApache]

can we use cartos on the UFS, as the boge ones for example??

 

[inquisitorj]

You cannot bottom feed a 510 carto because the liquid just goes up the center tube not into the filler. You would have to punch the carto like with the 808's in the AVS. You would have to keep the liquid control closed tight and only use the air control ring. I have not experimented with this yet, so this is just conjecture.

Oh yea, the dual coils are too tall for the UFS.

 

[Stownz]

You cannot bottom feed a 510 carto because the liquid just goes up the center tube not into the filler. You would have to punch the carto like with the 808's in the AVS. You would have to keep the liquid control closed tight and only use the air control ring. I have not experimented with this yet, so this is just conjecture.

Oh yea, the dual coils are too tall for the UFS.

New FOG is 510 internals, not sure how it is feeding. Can't seem to get anyone to post pics.

 

[inquisitorj]

From everything I have found, it is just a 901 to 510 adapter. I am not 100% sure though. The height of a 510 atty with 510 to 901 adapter is the same as a 901 atty.

Checked the site and it looks like it is a straight 510 connection that feeds through the side air holes in the bottom, so it is a bottom feeder.

 

[Stownz]

From everything I have found, it is just a 901 to 510 adapter. I am not 100% sure though. The height of a 510 atty with 510 to 901 adapter is the same as a 901 atty.

Checked the site and it looks like it is a straight 510 connection that feeds through the side air holes in the bottom, so it is a bottom feeder.

Never thought of that, Ill try sticking an adapter in there. Thanks for the idea !

 

[sonabraham]

Cartomizers no problem with ufs. Would be nice to have the top cap adapter.

 

[jacktan12]

Cartomizers no problem with ufs. Would be nice to have the top cap adapter.

How did you get cartos to work in a ufs? I've got Boge cartos, and the connector doesn't contact the pin to get power into the carto. Plus, it's waaaayyyy too long and doesn't seem to get juice. Please help....would love to try autofeeding cartos in a ufs.

 

[imeothanasis]

if you cant have a contact with center pin you can remove the o-ring that is under the center pin and you will earn 1,5 mm so the contact will be established jack. As for the length, you can buy a very cheap pipe cutter and cut the length of the carto.

The feeding can be done by making a small hole in the side of the carto but some cartos work without hole too.

 

[AldoApache]

uhmm... this looks very very interesting

 

[jacktan12]

if you cant have a contact with center pin you can remove the o-ring that is under the center pin and you will earn 1,5 mm so the contact will be established jack. As for the length, you can buy a very cheap pipe cutter and cut the length of the carto.

The feeding can be done by making a small hole in the side of the carto but some cartos work without hole too.

Thanks, Imeo. I get the idea now. A bit more work, but I'll give it a try. However, I doubt it would be better than using LR 510 atties, coz they are working heavenly for me right now.

 

[sonabraham]

It's just like with the AFS. Some cartomizers make contact while others from the same box won't screw down far enough.

No need to cut cartomizer. Try just using a drip tip and an o-ring same size as AFS top o-ring. also, there is a U.S. o-ring 1/2"x5/16"x3/32 that should work.

 

[imeothanasis]

UFS isnt like AVS son. You cant put a bigger atomizer inside it with just an o-ring because it will leak

 

[sonabraham]

Imeo, You miss understood what I said. It would be really nice to keep this thread going. Also be nice have an adaptor made to properly use cartomizers in UFS.

 

[imeothanasis]

Can you explain again son, sorry for the misunderstooding