Dual Coil Build for KBox Mod on Rhyno RDA

[Matt Dances]

Hello All, I have a question.

Today I decided to break out my old KBOX mod and give it a run for a week or so.

Thing is I been using the Standard Functions Rhyno rda on my Mechanical Mod for a bit and I've been running 22G 6 Wrap Dual Coil Build on it and it works great. But i'm pretty positive that this won't fire on the KBOX.

So my question is can I use 22G Wire to build a dual coil on my rda for the KBOX? if so how many wraps would it take to get .5ohm? so I can get it to fire on the KBOX?

 

[FishingBuffalo]

Check out Steam Engine. Will give you a great info.

 

[Nuggit]

Kbox fires down to .3.

 

[Matt Dances]

I'm talking about the OG KBOX not the MINI.

Sorry for not clarifying.

 

[yuseffuhler]

OG Kbox fires down to 0.4 ohms. I normally don't build that low; 0.5 ohms is a nice little buffer. I use 24 gauge kanthal or 26 gauge if I'm doing dual coils. 26 gauge is much better for using the max of 40 watts; 2.5mm ID and 8 wraps make for 0.5 ohm dual coils.

 

[Robert Cromwell]

http://www.steam-engine.org/coil.asp?r=1.5&id=1.588&ll=4.762