Dual coil cartomizer + Infinity?

Status
Not open for further replies.

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
Well I figured it out. If I use it on my passthrough or Infinity they work like poop but it's on my Buzz with the voltage and amps to drive these things plus the letting them sit a bit. It's not age LD it's the PV you use them on. I guess from now on I'll have to try things on every PV I have before I post results. It's called the big dummy syndrome LD. But I know you would want me to not lead you astray so I have to put my further findings as they arise.

Pokey I will always admit when I'm wrong and have my Crow Flambé when it is served. :):):)

Although I admit these are indeed good cartos I still like my Fusions Better. They have better vapor and taste.

fusi.jpg
 
Last edited:

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
Im guessing it is due to wicking. However the wixks are placed they most likely need time to suck it in.

I had 5 fusions with slow wicks the other day. Burned em up first hit. This was after I let them sit for 10 minutes. I guess all cartos can have wicking problems.
It has allot to do with the juice you use too. I do have wicking issues, very seldom though and I think it's because I vape a light, clear juice that is 100% PG.
 

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
Dagnabbitt!!!!!!!!!! Looks like my usual source of useful information has let me down...Dag on...I tell you...must be that "old timers" ahh setting in.....My recent research indicates I have a medicine available too slow it's progress Bro!!!!!!!! What's up with all that smoke???? Better be careful the neighbors might call the fire department!!!!!!!!

That's just normal Fushion and Buzz vapor.
 

uzzaperez

Ultra Member
ECF Veteran
Oct 12, 2009
1,031
198
Perez-uzza to this day
Well I figured it out. If I use it on my passthrough or Infinity they work like poop but it's on my Buzz with the voltage and amps to drive these things plus the letting them sit a bit. It's not age LD it's the PV you use them on. I guess from now on I'll have to try things on every PV I have before I post results. It's called the big dummy syndrome LD. But I know you would want me to not lead you astray so I have to put my further findings as they arise.

Pokey I will always admit when I'm wrong and have my Crow Flambé when it is served. :):):)

Although I admit these are indeed good cartos I still like my Fusions Better. They have better vapor and taste.

fusi.jpg

I've been a KR user for a long time, just recently trying out some 510 cartos. I ordered five of the dual coils.

The dual coils were okay, but they pull a lot of power, drain my batteries fast, and make my Buzz pretty hot. They perform fine, but really no better than other cartos so I just didn't think they were worth the trouble.
 
Last edited:

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
Fusions are Ikenvapes. They are actually 801/510 fusions. That is a Fusion that Fusionmans holding. http://www.ikenvape.com/store/cartomizers/801cartomizers/801FUZE or you can get the black ones http://www.ikenvape.com/store/cartomizers/801cartomizers?product_id=91.
BTW if you want to order any you better get on the alert list because they don't last but about a minute and then it's out of stock again. Serious vapers love them so they sell out fast.

This was the original fusionman but out of respect for Mike I edited it.

fusionman.jpg
 
Last edited:

Bovinia

Divine Bovine
ECF Veteran
Jul 17, 2010
14,449
50,826
65
South Carolina
5C, I usually hang around 4.5 too but I was testing out a new flavor I made so that called for a little voltage experimenting. I went back to my usual favorite flavor after irritating the roof of my mouth and it felt better this morning. Now I'm vaping the new flavor at my usual voltage and getting the irritation again, so I'm disappointed to say that it must be the new flavoring I used :(
 
Status
Not open for further replies.

Users who are viewing this thread