What do u think 24g khantal dual parallel vertical coils
dual parallel vertical coils
- Thread starter Danielstang
- Start date
- th_trl_thread_readers 0
- Status
Till now tons of vape and i have a samsung batt going good my mod its mech but its not going hot or nothing major cool build
it's hard for me to guess just by looking but it looks like it would ohm out under .18 or abouve .14, that's very dangerous.
samsung isnt what you want for that in a mech buddy, you want sony vtc4's, is it a mech tube or box? and whats the ohms? super important.
even with sony vtc4 you don't want to really go unbder .14, but to some thats even stupid to do.
For that build, just by the looks of it, if you are under 0.25ohms you are going to want Sony VTC3/VTC4 or LG HB6 batteries, especially for crazy builds like that on a single battery tube mech mod. Even then with 30amp CDR batteries for a single battery mech mod you should be above 0.25ohms, want to be down at that range you need a dual battery parallel mech box mod, even with 30amp batteries. You are going to cook batteries with that build, literally, after a month you will notice a significant decrease in performance, all in max voltage, length of each charge, and when you loose Mah you lose CDR rating as well, so 30amp batteries will be in the 25amp CDR max by then from all the abuse. I understand wanting that super cloud, I was there myself last year, but please do your research properly and be safe, just saying.
I am still waiting for my ohm meter ill post whenever i have it but as long as dont get too hot is danger time
If you insist on keeping that build (your an adult, no one can tell you what to do), I highly advise not putting it in your pocket in case of misfire.
more wraps if you insist on going paralell, your at 5, I advise at least 7, and keep, the diameter as large as possable. Although at that gauge I would ditch the parallel. since your paralell your ramp will be high enough already, so more diameter will help you hold more wick anyway, and up the ohms.
no such thing as a30 amp battery.
http://www.e-cigarette-forum.com/fo...17-purple-efest-batteries-not-advertised.html
>_<
I hope you have a regulated mod that at least reads ohms close to being accurate. If not, why are you firing a coil config you do not know what amps it will ask of your batteries on a fresh charge? Those Samsung 25R's are 20amp CDR, like the Sony VTC4 they can be pushed a bit higher, but still. If you do not have a way to read your Ohms, sorry to sound the Nanny here, but stop, please. I do not want to see another statistic, especially at the critical stage we are with the FDA putting their Deeming Regulations on Vaping on Obama's Desk for signing to go to the House floor.
First and best tool when doing advanced vaping, the section above your shoulders, second is to have an Ohm reader, Digital Multimeter, or a mod that reads resistance of your coils before even firing a coil.
No such thing as a 35amp or higher CDR battery you mean.
LG HB6 and Sony VTC3 true 30amp CDR batteries, google their specs, Sony VTC4 a 20to25amp CDR battery that can do 30amps, google the specs.
I kinda wanna vent a sony vtc4, do you think it would melt the metal pin on the bottom of my smpl? or would it be okay? I want to show people what happens.
- Status
Similar threads
