E2 v4 cartomizers - help with ohms

[mj64]

Hi,

I've been vaping for a few weeks and am reading some really good stuff about the E2 v4 cartomizers. I use 808 and elegant batteries, what's the best OHM for me to try here? 2.8?

Thanks,
mj

 

[stubear62]

Hi mjmetz,
Welcome to ECF and I would say to try the 2.4 if u can.
If you like a stronger TH, that is. If not then try the 2.8 and even the 3.2 which will work with ur device.
Even though the higher Ohm is better for higher voltage, the draw will be smoother and TH hardly there. Other than that, use LR atties..
Hope this helps!
Good luck!

 

[dormouse]

I don't think 2.4 would be recommended for a slim ecig battery. That's down in LR territory I think? More something for a fat-battery 808 like Elegant Easy? I think you should try 2.8 which would be the hotter stronger or the 3.x which would be a bit cooler or both. I actually don't care for the 2.8-ish cartos I've tried on KR8 (the V4L WOW carts) - too hot on my lips. But they weren't the CE2's.

And I think with CE2 R4's you want to get ones of their filling kits? (a little syringe with a special tip?). When I got CE2 r4's for a different PV at VaporJunction, they also sold the filling kit.

 

[mj64]

Sigh - this is the hard part of vaping I guess, so much to learn. I guess I'm going to try some 2.8 or 3's.

 

[WomanOfHeart]

You should be fine with the 2.4's if that's what you want. 2.4 is still in the low end of standard resistance. I used some 2.4's on my eGo and didn't have a problem.

 

[Stosh]

You could try some 2.4's and 2.8's, I've found they both work well at 3.7v which your
808 batteries would be, although the 2.4's will get a little too hot is you chain vape.
(I do, I admit it, but it's just so tasty...)
But it's easy enough to unscrew one, and bring in a relief pitcher....