Easy way to sample your juice?

[skyztheLynnit]

I did the sampler from Alice in Vapeland and want to get the most out of them.. or any other samples i order. I saw the 510 bridgeless atomizer.. is dripping the easiest way?

 

[Baditude]

Either using a drip atomizer or a Nano clearomizer would be convenient. Descriptions and pics of both in this article:

http://www.e-cigarette-forum.com/forum/blogs/baditude/3230-1-proper-terminology-carto-tank-what-primer-juice-delivery-attachments.html

 

[theclev13]

When I make my own DIY juices I like to use an LR atty "bridged or bridgeless" usually 4 drops and that's good for about 5-7 good draws then you add another flavor. But that's just my opinion

 

[skyztheLynnit]

When I make my own DIY juices I like to use an LR atty "bridged or bridgeless" usually 4 drops and that's good for about 5-7 good draws then you add another flavor. But that's just my opinion

Which atty do you use? I'm looking for one that will fit an ego 900 mah battery (if they exist)

 

[Jerms]

Which atty do you use? I'm looking for one that will fit an ego 900 mah battery (if they exist)

Any 510 atty will fit on your eGo. For a high quality bridge-less atty I'd suggest this one at EmpireMods http://www.Empiremods.com/product_p/brdg5108.htm

That's for a 1.8ohm 510 bridge-less atty. It'll be a pretty warm vape on your eGo, but if you want even hotter a vape they have a 1.5ohm.

AvidVapor (Cisco spec) and Ikenvape also have great atties for a couple dollars more, but the ones at EmpireMods are just as good.

Sent from my LGL55C using Tapatalk 2

 

[skyztheLynnit]

Thanks so much jerms and baditude!

 

[theclev13]

any standard LR 510 atty will work, it will not hit the best but itll give a good taste of what you are vaping

 

[Grimwald]

I just take the filler out of a carto and drip into that (with manual bats only). Not for all day dripping, mind you, just for quick sampling.

 

[STLJohnny]

I love Nanos. Easy to rinse and reuse with no old flavor and if I want to run down a ml I can do that too.
If you want to reuse right away you can, you just have to get out the gurgles with a few blows while its off the batt and your finger on the bottom.

PS this is the 3rd time I saw this thread and the 3rd time I laughed at the title. I dont know where my head is.

 

[thejaker]

+1 on the nano clearomizers, I love them and clean easily with 91% IPA. But for a quick and easy solution I have 0.5mL cartomizers I use for testing. They make really small cartomizers for this purpose and I've enjoyed them for R&D over the past 5 months:

Super Shorty 1.7 Ohm 510 Black Cartomizer

 

[NGAHaze]

I pulled the bridge on an old 510 atomizer I had and used it on various batteries (even cig-alikes) for testing juice. I think RDA's are probably best imho however.