Ebaron dripper vs rm2 on reo?

[Ladiekali]

Has any one used both if these?
i am wondering what the difference between these vapes are?
i like a tight draw. I currently have the ebaron and it fits on my reo great.
I am wondering if it is worth it to get the rm2 or just stick with this one.

I usually use carto's and Cisco dripping atties, but am trying to consider this building stuff.

 

[Train2]

I don't have an RM2, but I did pop my eBaron on my REO before my Cyclone was ready...
I found the eBaron didn't squonk great - and long-term, I think you'll have an easier time and more flexibility building on something like an RM2. Both are good "stepping stones" to get INTO building - wrap a coil for the eBaron (and if it fails, you can use a stock one) - then you're ready to wrap for an RM2, then you're ready for anything!

 

[ENAUD]

I don't have an eBaron, but I can tell you that I am very impressed with the RM2's, they are pretty easy to build on, give awesome flavor, and great vapor ( I enlarged my airholes), the stock airhole is a tight draw.

 

[Ladiekali]

ok rm2 it is then.
I was PIF'D a rm3 but no matter the build i put on it, it shorts. Im thinking it's the posts as I have built before, ebaron's, sophias, kayfuns and igo's.
I would rather mess with a single coil anyway.

What is a good target ohms for a rm2 on a grand?

 

[Blind Owl]

Still early days for me (got mine on Friday), but the 1 - 1.5 ohm range seems to be my sweet spot. Besides flavor, I like a good strong throat hit. Comes from 35+ years of smoking Canadian cigarettes, I guess...

The draw is what I consider tightish, which suits me fine. I was pleasantly surprised to find that the vape is coolish, which likewise suits me.

[ edit: That wasn't very clear, was it? I'm referring to the RM2, not the EBaron... ]

 

[ginny005]

I usually stay between .7-1.0 on mine but I have a .5 coil on one of my rm2s now and i'm kinda liking it. of coarse I'm having one of "those" days so the extra punch is helping with that.
Are the posts loose on the rm3? mine came with a loose post I managed to tighten it up a little but it'll still move. Also check the post holes to see if there are any pieces of metal shaving or kanthal that could be shorting it.

 

[jifjifjif]

I like .5ohms on the rm2. vaping 12mg juice. 90%vg.

 

[Ladiekali]

Thanks for the feedback. I ordered a rm2 today.
Im not real interested in the rm3 because it's small and dual coils is kinda tight.

 

[slappy3139]

Out of all the small rdas I tried, I always liked the rm2 the best, easy to build on and really great flavor.

 

[supersport13]

Love the RM2!

 

[Sloth Tonight]

The RM2's a great atty if you like tight draws. Stock air hole I never went much below 1 ohm. Drilled to 1/16th, I found the best flavor .7-.9. YMMV

 

[Ladiekali]

Thanks. I do like a tighter draw. I usually vape 1.5-1.7
Was thinking I'd shoot for 1.2-.8

I appreciate the feed back

My last attempts at building were not enjoyable vapes for me
Gonna give it another shot.

My rm2 will be here by Friday!

 

[Izan]

Has any one used both if these?
i am wondering what the difference between these vapes are?
i like a tight draw. I currently have the ebaron and it fits on my reo great.
I am wondering if it is worth it to get the rm2 or just stick with this one.

I usually use carto's and Cisco dripping atties, but am trying to consider this building stuff.

hi LK,
I have both: vape quality wise, I think they both have the ability to produce amazing flavour.

The squonk technique is different with the RM2, the "blink squonk" with the RM2 is doable, but takes some practice (have paper towel handy).
I suggest you pull your new RM2 drip tip and watch the flood and drain cycle to get a feel for it the first day or so.
You may also need to squonk more often since the RM2 drains completely versus the eBaron.

Are you using the pre-made coil/wick/cup units with the eBaron or are you rebuilding them yourself?


Have fun.
I

 

[eratikmind]

Got an eBaron Pro dripper some 2 years ago. It was a great little dripper. However, I quickly tired of making up the NR-R-NR wire assemblies.

Nonetheless, it was a wonderful stealth set-up in combination with a 18350 tube mod.

 

[Spydro]

I wouldn't think the eBaron would squonk very well, wouldn't drain either, not what they were designed for. Never tried squonking with mine, when I started buying from Billie I was still using my ProVari's, so my eBaron's are Pro models. Add all the Sophia's bought for too many tanks from him and other sources for the ProVari's as well, and the almost $100 for a Zapper V2 to make the wires... and for a time Billie was a regular bill to pay. I only used the Zapper once though before I stopped using the ProVari's and all the gear bought for them.

I have 7-8 RM2's... you should like it just fine, easy to build, great flavor.