eGo ONE tank series – CLR coil

[Dieseler]

Sorry if this question was asked before.
I have some Joyetech Mega tanks 4ml and use clr 1 ohm coils in them.

Now i see what called Joyetech Mega VT 4ml tanks that look like the Joyetech Mega tanks but in different colors.

Will the Joyetech CLR 1 ohm coils work the same in them and what is the difference between them although i have not seen them stainless colors.
Thanks

 

[IMRs]

Sorry if this question was asked before.
I have some Joyetech Mega tanks 4ml and use clr 1 ohm coils in them.

Now i see what called Joyetech Mega VT 4ml tanks that look like the Joyetech Mega tanks but in different colors.

Will the Joyetech CLR 1 ohm coils work the same in them and what is the difference between them although i have not seen them stainless colors.
Thanks

@Dieseler They're both the same tanks. (Ego One & VT). They were called VT's to match with the Evic Mini's. Let me get you a link for the silver if they would still have them. Be right back.

 

[IMRs]

Sorry, Sweetvapes and Litecigusa are out of stock. I can't seem to find any other vendors with them in stock. The v2's came out and they are similar to these. (All the coils will work with these tanks). Nice price at vapeshop for the v2's...
Joyetech eGo ONE Mega V2 Tank

 

[Dieseler]

Sorry, Sweetvapes and Litecigusa are out of stock. I can't seem to find any other vendors with them in stock. The v2's came out and they are similar to these. (All the coils will work with these tanks). Nice price at vapeshop for the v2's...
Joyetech eGo ONE Mega V2 Tank

Thanks a bunch IMRs for taking the time to give link.

 

[GranFumador]

Memorandum
​

To: All CLR Lovers

From: CLR Lover

Re: Bottom Pins a.k.a., .... plugs, in Cheechospeak

Subject: Variety is the Spice of Life

It has come to our attention that some terribly misguided
people prefer a tight draw. The pins that come with the CLR 1.0 kanthal, black o-rings have a small diameter hole to accomodate such godforsaken preferences.

The CLR Ni and Ti coils have a much larger hole, together with holes in the sides of the pin legs.
The airflow is appropriate to those who enjoy spending time in a wind tunnel. A nearly closed AFC atones for the excess, providing a lovely vape.

Our research and development team, while on perpetual furlough in a tiny hamlet in coastal Maine, has recently discovered a third variety, with an intermediate, and therefore highly desireable, diameter hole. The CLR 0.50 ohms, black o-ring coil, at least in some manufacturing batches, is the "golden mean" pin possessor.

Team members made this startling discovery just after spending considerable time drilling out the holes in pins from the CLR 1.0.

 

[Cheechako]

Memorandum
​

To: All CLR Lovers

From: CLR Lover

Re: Bottom Pins a.k.a., .... plugs, in Cheechospeak

Subject: Variety is the Spice of Life

It has come to our attention that some terribly misguided
people prefer a tight draw. The pins that come with the CLR 1.0 kanthal, black o-rings have a small diameter hole to accomodate such godforsaken preferences.

The CLR Ni and Ti coils have a much larger hole, together with holes in the sides of the pin legs.
The airflow is appropriate to those who enjoy spending time in a wind tunnel. A nearly closed AFC atones for the excess, providing a lovely vape.

Our research and development team, while on perpetual furlough in a tiny hamlet in coastal Maine, has recently discovered a third variety, with an intermediate, and therefore highly desireable, diameter hole. The CLR 0.50 ohms, black o-ring coil, at least in some manufacturing batches, is the "golden mean" pin possessor.

Team members made this startling discovery just after spending considerable time drilling out the holes in pins from the CLR 1.0.

I learned something new today, so it's a good day!

 

[pufZeppelin]

the ego one tanks are all the same (coils fit in each) - the distinction of VT or CT mearly means it comes with a TEMP CONTROL coil...
the ego one tanks came out of the "eGo ONE" series of 'stick batteries' (1100mah/2200mah)

as far as I know there is 3 coil positive tip ends (that I've seen and use)

the: 3.5mm gold plated / 3.5mm silver / 1.8mm silver

​

 

[YoursTruli]

Memorandum
​

To: All CLR Lovers

From: CLR Lover

Re: Bottom Pins a.k.a., .... plugs, in Cheechospeak

Subject: Variety is the Spice of Life

It has come to our attention that some terribly misguided
people prefer a tight draw. The pins that come with the CLR 1.0 kanthal, black o-rings have a small diameter hole to accomodate such godforsaken preferences.

The CLR Ni and Ti coils have a much larger hole, together with holes in the sides of the pin legs.
The airflow is appropriate to those who enjoy spending time in a wind tunnel. A nearly closed AFC atones for the excess, providing a lovely vape.

Our research and development team, while on perpetual furlough in a tiny hamlet in coastal Maine, has recently discovered a third variety, with an intermediate, and therefore highly desireable, diameter hole. The CLR 0.50 ohms, black o-ring coil, at least in some manufacturing batches, is the "golden mean" pin possessor.

Team members made this startling discovery just after spending considerable time drilling out the holes in pins from the CLR 1.0.

so the next big question is....... has anyone found a source for the silicone pin insulators?

 

[oplholik]

I haven't heard of any sources for them. Those and the correct o-ring would keep these things going forever.

 

[oplholik]

Would an insulator for these tanks fit. 50 standard rubber insulators used in a variety of coil types like ce4, protank, mt3
Seller has some others I'm trying to get the size on.
50 RUBBER Insulators for rebuilding coils ce4 protank etc

 

[YoursTruli]

Would an insulator for these tanks fit. 50 standard rubber insulators used in a variety of coil types like ce4, protank, mt3
Seller has some others I'm trying to get the size on.
50 RUBBER Insulators for rebuilding coils ce4 protank etc

Too small, on the alternative silicone listing (shorter than the rubber ones was the only difference mentioned) they said that they fit the occ coils so I tried out the ones from occ coil heads I have and no go.

 

[oplholik]

Too small, on the alternative silicone listing (shorter than the rubber ones was the only difference thy mentioned) they said they fit the occ coils so I tried out the ones from occ coil heads I have and no go.

Ok, the others he has look even smaller. There has to be something out there that will work.

 

[pufZeppelin]

for perspective...

I made a post awhile back showing how to reduce the air-flow (in between) the 3.5mm & 1.8mm center pins
by inserting one of the mentioned insulators INSIDE the CLR pin...

gives ya an idea of the size differences

 

[MikeADore]

Some of you have been praising the STM, and after seeing the prices, I decided I wouldn't spend that much since I really don't need it. Well, I found a subox mini kit at Sweet-Vapes for $29.95, which is pretty much the same price as the tank itself, and decided that's well worth the price because I wouldn't mind having a new, and different, box mod. It comes with the new RBA as well as two sub-ohm stock coils. They apparently only have them in black. If anyone is interested, here's the link:

Kanger Subox Mini Kit Black $29.95

By the way, Sweet-Vapes supposedly added Blue Check for age verification yesterday. But, I was never asked to verify anything. Not sure what the deal is. Blue Check seems very simple, though. You provide the same info (minus any payment info) that you provide to the vendor but add the last four digits of your SS number. Those four numbers are not stored. They say that once you do that, you can check out at any site using Blue Check without having to provide the info again. You can also choose to use a picture ID.

ETA: To those using the Kanger RBA, it looks like one of the easiest to rebuild. Is that the case?

 

[oplholik]

I'm hoping that in some cases at least, if you are a previous customer ,maybe you are grand fathered in. Could that be the case here?

 

[MikeADore]

I'm hoping that in some cases at least, if you are a previous customer ,maybe you are grand fathered in. Could that be the case here?

Just not sure. I have ordered from them quite a few times, but I still don't know how they could know my age. On another note, I usually throw in a pack of 1.0 CLR coils when I order something, but they are out of stock. They only have the 0.5 ohm. Was tempted to try them, but I know I love the 1.0 so decided to just wait. I already have 25 of them, so it's probably wasteful to buy more anyway.

 

[oplholik]

25 clr's will last you a long, long time if you are rebuilding them.

 

[Jumpin' In...]

Just not sure. I have ordered from them quite a few times, but I still don't know how they could know my age. On another note, I usually throw in a pack of 1.0 CLR coils when I order something, but they are out of stock. They only have the 0.5 ohm. Was tempted to try them, but I know I love the 1.0 so decided to just wait. I already have 25 of them, so it's probably wasteful to buy more anyway.

I asked Sweet-vapes CS when they expected to get the 1.0 CLR coils in. They advised via email that their order for the CLR coils had been pushed back because the Chinese were trying to get as many new mods into the country by 8/8. Short answer was "We are hoping soon".

 

[FranC]

Got 3 boxes of the 1.0 CLR coils yesterday from ft.

 

[Jumpin' In...]

Got 3 boxes of the 1.0 CLR coils yesterday from ft.

I may end up doing that, but there's something else I want to order from S-V so I was just going to throw a pack in.

I do have to make a FT order though - so that they can make good on some defective KFMv3 bases I received. Once that's done I'll be trying to stay away from FT.