http://www.e-cigarette-forum.com/forum/blogs/cheechako.83046/His profile is top secret
I have rebuilt the 1.5's with cotton, it works well.
Eleaf GS Air Fan : Part 2
- Thread starter classwife
- Start date
- th_trl_thread_readers 0
- Status
I have rebuilt the 1.5's with cotton, it works well.
Very true! But I tried everything but armadillo arm pit hair prior to posting the recoiling stuff for the 1.5's.So have I.However, I don't like the taste of cotton so I stick to rayon.
Very true! But I tried everything but armadillo arm pit hair prior to posting the recoiling stuff for the 1.5's.
Who knows? Might be just the thing!
That's the only way you know for sure! I tried Japanese cotton, cotton balls from CVS, Egyptian cotton but always come back to rayon.
Who knows? Might be just the thing!
The white stripe off a skunk is the best!!! Shaving the skunk to get it is a little tricky, explains why it's so rare.
Could the quote mean 'we don't have 1.5 atomiser -in cotton-, the ones with silica are 1.0 and 0.5. All others have pure cotton.'
English not first language and all that. Actually forget that sounds like the person who replied is not around what they sell...
Having said that if you prefer cotton, everything suggests the 1.2 coils are cotton, I find them as good as the 1.5 coil, caveat only used 3 cotton and 1 silica so far....
So my dud nautilus box of coils, rinsed them all out, just trying one on the mini with a long drip tip and much improved...tiny bit of juice spitting back but the long drip tip sorts that, little to no crackling or gurgling, perhaps the longer drip tip softens the draw and prevents flooding.
Kind of weird...
Kind of weird...
Sounds like you have a firm grasp of chinglish.
Yes. But do they actually sell 1.0 and 0.5 ohm coils?
DD just stopped by with my little nugget and my sweet grand pup. I think lack of sleep and hormones are getting to her. She was a little on the cranky side.
Cheech, I need your help. I'm having a hard time getting the wick into the coils I build on the 16 gauge needle so I tried building them on a 2.0 screwdriver. Epic fail!! Steam engine says 7 wraps on the 2.0 with 29 gauge for 1.2 ohms but when I build them exactly like that I get .5 and they blow when I try to fire them. Where am I going wrong?
Had to build one real quick to those specs, 29 gauge with 7 wraps on 2mm screwdriver gave me 1.5 ohms.
Might check your legs to make sure they aren't one of them isn't sticking out a bit and making contact...
7 wraps of 29 gauge was a bit of a tight fit. 6 should get you where you wanna go.
I stand corrected, 6 wraps got me to 1.4 ohms.
- Status
Similar threads
