I think my .75 coil is giving up after just 10 weeks or so.
Junk...
Junk...
Need help from former MFS (MyFreedomSmokes) customers
Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?
I think my .75 coil is giving up after just 10 weeks or so.
Junk...

All I can say is, you must be very much more tolerant to flavor change than I am! Once the flavor starts to change on me, that coil gets re-wicked! If that doesn't do it, then it gets tossed into the rebuild stash, for a complete rebuild. Of course, I am TC by preference, so I can't dry burn the coil to clear off the gunk like you can with Kanthal. I've ruined too many kanthal coils by forgetting to watch my juice level and getting dry hits, doesn't take much of that to burn the cotton to the point that there is not much actual cotton left inside the wraps of the coil, go to pull out the old cotton and it comes out in two pieces, one from each side of the coil with black sludge instead of cotton for the inside ends! Going to have to give Stainless Steel wire a try one of these days as it can be vaped in both TC and VV-VW modes!I think my .75 coil is giving up after just 10 weeks or so.
Junk...
I think my .75 coil is giving up after just 10 weeks or so.
Junk...
I do 5-7% max flavor so I can tell if flavor changes.All I can say is, you must be very much more tolerant to flavor change than I am! Once the flavor starts to change on me, that coil gets re-wicked! If that doesn't do it, then it gets tossed into the rebuild stash, for a complete rebuild. Of course, I am TC by preference, so I can't dry burn the coil to clear off the gunk like you can with Kanthal. I've ruined too many kanthal coils by forgetting to watch my juice level and getting dry hits, doesn't take much of that to burn the cotton to the point that there is not much actual cotton left inside the wraps of the coil, go to pull out the old cotton and it comes out in two pieces, one from each side of the coil with black sludge instead of cotton for the inside ends! Going to have to give Stainless Steel wire a try one of these days as it can be vaped in both TC and VV-VW modes!
I mostly vape this in my Gsair2 with a .75 coil.Cynical Old G is not actually one to be easily impressed, but a quick look at the calendar on my phone tells me that this Thursday it will be 4 weeks since I started using my 0.78 Ohm coil in my GS Air 2.
OK I'm vaping clear DIY 16 strength juice using my iStick 30w set at a modest 2.1 volts but this is still to me downright remarkable, especially given the small size of the coil. Flavour remains unchanged, vapour production is excellent albeit that the resistance has crept up to 0.8 ohms.
I can only say that I am impressed...have a good one all!
never gave side fill much thought but the Melo2 came with a kit and I just went ahead & used it
lay it on side/spin it open/poke a tip in there/presto (they say not to fill it in upright position)
pretty qwik, simple, painless - I like it![]()
The supplies for my first stab at DIY ejuice should be here tomorrow. Where is a good place to look for recipes? I prefer to vape Max VG juice, so all the stuff I ordered is VG based. Hadn't realized that stevia was used as a vaping ingredient, Thanks, must be the sweetener that can be added to some online juice!I mostly vape this in my Gsair2 with a .75 coil.
120 ml batch.
4 ml CAP Vanilla Custard V1
1.5 ml CAP Vanilla whipped cream
6 drops NuStevia liquid Stevia.
3 mg nic level
50/50 PG/vg.
Try looking here. Also some flavoring manufacturers have their own threads.The supplies for my first stab at DIY ejuice should be here tomorrow. Where is a good place to look for recipes? I prefer to vape Max VG juice, so all the stuff I ordered is VG based. Hadn't realized that stevia was used as a vaping ingredient, Thanks, must be the sweetener that can be added to some online juice!
Have not yet seen anybody refilling a SIDE-fill tank...
The refilling-time-saving-feature of a TOP-fill tank is it's NOT having to be removed from the Mod...(ie. UNscrew cap=>refill=>REscrew cap)...
Can one refill a SIDE-fill tank without removing the tank from the MOD...(or do you have to remove the tank first)??? ..

Some stevia works as an ejuice sweetner
? Maybe I should run it thru my molecular resizer?Kurt doesn't like Stevia. Wrong size molecules and may go bad.