Eleaf GS Air Fan

[Cheechako]

That's exactly what I was doing! And you're not going to believe this, but it's pretty close to the nice loose draw of a GS Air now. Now that I've got this nice rayon wick and the draw that I want, I'm falling in love with these old clearos all over again.

Nothing quite as sweet as an old romance...

 

[Oregon Linda]

Don't feel bad....I bought 10 lbs of rayon....its enough to make a king size mattress.........

OMG! Did you get it in a bale?

 

[Cheechako]

Don't feel bad....I bought 10 lbs of rayon....its enough to make a king size mattress.........

I really didn't have a clue about rayon when I bought it, JeremyR in the Rayon thread said it was fantastic.......which it is...!

Figured it would be enough to last me the rest of my life....then I found out it will last for five, possibly nine lives.......

I have to keep my box of rayon on a high shelf, I pictured my cats getting it and having 400 and some odd feet of rayon
strung all over the house.

 

[inspects]

OMG! Did you get it in a bale?

Yes....I didn't quite understand he meant feet, not pounds... a few months ago.....I have it figured out now.....

 

[GranFumador]

Oh, and don't trim your beard with a weed whacker, just a suggestion from my personal experience.

Haven't got a weed whacker, so I'm safe for now...but long away and far ago there was this hydraulic log splitter...
Let's just say it was embarrassing.

 

[inspects]

When the Fedex truck pulled up, I thought someone ordered a chest freezer......and he was at the wrong address.....

 

[Kivrin]

That's exactly what I was doing! And you're not going to believe this, but it's pretty close to the nice loose draw of a GS Air now. Now that I've got this nice rayon wick and the draw that I want, I'm falling in love with these old clearos all over again.

I picked up an airflow base for my mini protank 3 to test and need more! What did you use to drill them out?

I played around with building today, but I need to go try again over at my parents' house. They have an awesome old medical magnifying headset that my poor eyes need and better light. I didn't get very far because I couldn't see a thing. How did my eyes get so bad so fast I got my first glasses last summer and already can't see with them. sigh.

 

[Cheechako]

I picked up an airflow base for my mini protank 3 to test and need more! What did you use to drill them out?

I played around with building today, but I need to go try again over at my parents' house. They have an awesome old medical magnifying headset that my poor eyes need and better light. I didn't get very far because I couldn't see a thing. How did my eyes get so bad so fast I got my first glasses last summer and already can't see with them. sigh.

This is what I use, makes life a lot easier for these old eyes.

 

[Kivrin]

View attachment 423059
This is what I use, makes life a lot easier for these old eyes.

I saw that in one of your pictures! It looks really nice. Maybe I'll ask for one for my birthday.

They have one of these, but a model from about 50 years ago: OptiVISOR

And better light. I go over there to help them out a lot anyways

 

[Cheechako]

I saw that in one of your pictures! It looks really nice. Maybe I'll ask for one for my birthday.

They have one of these, but a model from about 50 years ago: OptiVISOR

And better light. I go over there to help them out a lot anyways

I'm recoiling here!

Those are cool!

 

[Nica]

I want my M (you're singing "TV", arentcha.)

G’day there Katdarling. (Thanks for inspiring me to join up here on ecf )

Like you and quite a few others on this thread I too have been anxiously waiting on the release of the GS Air M & MS tanks. However, based on the information I received from ismoka/eleaf direct, I think we have all been waiting in vain for any ‘official’ release to take place.

When I first heard about these tanks I couldn’t find any more detailed information about them except for the brief details and short video clip available on the wholesaler UniversalVap's website.

So I corresponded directly with ismoka/eleaf about them.

There was some initial confusion at first though as the first Customer Service Rep I dealt with told me they didn’t make a GS Air M or MS tank. They instead referred me to the current GS Air models and advised that whatever I was referring to must be a clone and not a genuine ismoka/eleaf product.

With a little bit of patience and persistence and a few more emails back and forth, including providing them with a link to UniversalVap’s website listings for the GS Air M & GS Air MS I was eventually able to confirm with ismoka/eleaf that both the GS Air M & GS Air MS are available to dealers/wholsalers only as a custom made product and they are probably not going to be officially released on the ismoka/eleaf website.

I also asked ismoka/eleaf if they could provide me with the specifications for each tank and they sent me the below picture. The shorter GS AIR- MS is obviously the one on the left and the GS Air- M is the one on the right. Both tanks are 19mm in diameter and also interesting is that the GS Air- MS only has a 2ml capacity whereas the GS Air M has 3.7ml capacity.




I’ve also been corresponding with UniversalVap and on Friday just gone they advised me that they will have the GS Air M tanks in stock in about ten days time. I did ask why they currently have them listed as ‘in stock’ atm but I didn’t get a response to that particular question...

As already posted by others above in this thread, UniversalVap have a MOQ of 10 for the GS Air M and a minimum $100 order amount.

So, it appears at this stage that unless you need/want 10 of them, a co-op between some of you might be the realistic way to get your hands on one/some but I understand from the ecf forum rules that discussions along those lines need to go into another dedicated area of the forum, so I’ll leave it at that.

Hope this information and particularly the picture and specs helps !

Cheers from the land down under

 

[Cheechako]

Good info.
I wonder why the "Custom Made" GS Air line of clearomizers?

 

[Oregon Linda]

I picked up an airflow base for my mini protank 3 to test and need more! What did you use to drill them out?

I played around with building today, but I need to go try again over at my parents' house. They have an awesome old medical magnifying headset that my poor eyes need and better light. I didn't get very far because I couldn't see a thing. How did my eyes get so bad so fast I got my first glasses last summer and already can't see with them. sigh.

Kivrin, I just drilled out one airhole with a 1/16" bit. Then I tested it and found the draw was perfect for my liking.

My eyes are horrible, too. I have this magnifier on a stand that my dad used to use for his stamp collecting hobby. Otherwise, I doubt I could have even seen those tiny holes.

 

[Nica]

Good info.
I wonder why the "Custom Made" GS Air line of clearomizers?

No idea cheechako. But to clarify it's not whole of the GS Air line that are a custom made product it's only the GS AIR M and GS AIR MS tanks for some reason. Perhaps they're testing the market for their popularity first. But the good news I suppose is that they will manufacture and supply them on a specific order placed directly to ismoka/eleaf by a dealer/wholesaler.

Some more product requests to FT by many of us might be in order perhaps...

 

[inspects]

I’ve also been corresponding with UniversalVap and on Friday just gone they advised me that they will have the GS Air M tanks in stock in about ten days time. I did ask why they currently have them listed as ‘in stock’ atm but I didn’t get a response to that particular question...

As already posted by others above in this thread, UniversalVap have a MOQ of 10 for the GS Air M and a minimum $100 order amount.

So, it appears at this stage that unless you need/want 10 of them, a co-op between some of you might be the realistic way to get your hands on one/some but I understand from the ecf forum rules that discussions along those lines need to go into another dedicated area of the forum, so I’ll leave it at that.

Hope this information and particularly the picture and specs helps !

Cheers from the land down under

Thanks for the info nic...I emailed UV twice with no response.

 

[Nica]

Thanks for the info nic...I emailed UV twice with no response.

No worries at all inspects. UniversalVap agreed to email me when they're actually in stock (however I've been told that more than a few times before by suppliers). I'll let you all know when/if I hear from them though.

 

[Skullman]

Mornin All: Other then some Sally's having the 10 foot Bag of Rayon old SKU Number. eBay offers all kinds of lengths for reasonable price.

I purchased half a dozen Air Bases for my Pro Tanks couldn't really tell any difference??? Best thing I ever did for the Pro Tank was rebuilding the Coils!

Retiring all my Pro Tanks as all these eLeaf Tanks Melo, GS Air, GS 16's with Air Bases completely out shine all my Pro Tanks! Soon to add the Lemo II & M to the lot!

Slowly the M Mystique begins to shed! Little by little the info comes out! Countdown to Reveal!

{:{}

 

[JoeyC]

I would think a rather large order for either the gs air m ms might get eleaf to run production on them.

 

[Oregon Linda]

I would think a rather large order for either the gs air m ms might get eleaf to run production on them.

Maybe the folks at eLeaf who make these decisions need to be made aware of this LONG thread of raving GS Air fans! Couldn't hurt.

 

[LynnNC]

Katya, got the Lemo Drop up and running! 30 gauge, 5 wraps, 2mm inner diameter coil at 1.4 ohms. Air flow half open, wicking is perfect!! I think this time around, I'm going to love this thing! Have you got yours going yet?

Life is good!!! I've got CLS/GCD mix going in a Reo mini, NT's Altered State in a Lemo Drop on an istick 50W, NT's Frenilla in a GS 16S on an istick 20W and to round it all out, Atlanta in a GS Air on an istick 30W. I told ya'll I was an NT junkie!