Eleaf iSolo Air 2 // Review by HyDrOpOnIc1987

Status
Not open for further replies.

HyDrOpOnIc1987

Super Member
ECF Veteran
Sep 12, 2021
378
410
eleaf iSolo Air 2 // Review by HyDrOpOnIc1987

Hello my friends and welcome to another review. Today I will be showcasing the eleaf iSolo Air 2 pod mod kit, which was sent to me by eleaf. I hope to teach you a little bit about this device, but will also maintain a fair and honest review. As usual, I will start with some promotional images and the features, specs and box contents before ultimately unboxing my kit, assembling it and finally my highlights from the time I spent using this kit. Alright, now that that's done, let's get to it!

Promotional Images, Features, Device Specifications and Box Contents















Features:
1. Easy to hold
2. 5 Colour Schemes (More colours, more joy)
3. Precise Airflow control
4. Compatible with all GTL series coils
5. Smart Chip inside
6. Great for all flavours.

Specifications:
Brand: Eleaf
Unit: 1 Set
Size: 33.2mm * 27.6mm * 91.4mm
Battery Capacity: 1500mAh
Pod Capacity: 2ml
Filling Hole Diameter: 3.5mm
Output Wattage: 1-40W
Charging Current: 5V/2A (USB-C)
Package: Gift Box

Package Contents:
1pc iSolo Air 2 Mod
1pc GTL MINI Pod 2
1pc GTL 1.2ohm Coil
1pc GTL 0.8ohm Coil
1pc USB Type-C Cable
1pc User Manual
1pc Warranty Card

Unboxing, Assembly and Usage Highlights





Right out of the gate, upon receiving the parcel and seeing the bright green on black all over the box, I was so happy! Besides red and black, bright green and black are my fav colour scheme, so to see it ALL over the box, I was happy!
On the front of the box is the Eleaf logo, a picture of the device as well as its name in writing, and the written Eleaf logo on the bottom.



On the right side is the “Scratch Check" sticker which has a QR code built into it as well, a picture that shows a black coil with fire beside it and the text “Power BLACK COIL Applied”, as well as 3 pictures depicting top filling, its GTL coil compatibility and the 1500mah battery that’s inside the device.



The left side has all the package contents, device specifications, support information, as well as their company HQ's address and website. Under that is a UPC code with the devices colour written directly over it.
The back of the box wasn't worth showing as I was running out of room for pictures. It's just the Eleaf leaf logo.
After taking the paper sleeve off, inside is the mod device assembled, but without liquid of course. I took the pod and cleaned it as best I could wish soap and water using q-tips.



I then further unboxed everything. Under the device, in another compartment, is a spare coil, a USB-C cable, the manual and warranty card.





I can't remember if the 1.2ohm coil was already installed or if I decided I wanted to try the MTL coil, but that's the one I chose to go with. I put liquid in each of the side holes and then installed the coil in the pod, filled the pod with Mango Wango De-Iced salt nic liquid by Sovereign and waited 15 minutes, which is probably over kill but the extra 10 minutes is worth not burning the coil.



After the 15 minute wait, I started at the very bottom of the recommended wattage for the coil (which is 7-13 watt) and slowly brought the wattage up one watt every 7-8 or so puffs until I rested at the max, 13 watts. I like the airflow almost completely closed off on this, even with the wattage range maxed for the coil. You know, more flavour! Anyways, I've been using this device exactly the same for about a week and a half with no real issues. I did drop the device and the pod popped off and coil shot across the room dumping my liquid on the floor. No idea why the coil popped off like that, but I hope it isn't going to happen every time I drop it. I don’t DIY my liquid so I don’t want to waste what I have trying to see if it will happen again or not. But yeah, that was my ONLY gripe with the device. I love the feel, how small it is. Easily palmable. The liquid wasn't used too quickly with the 1.2 ohm coil, but I didn't try the 0.8 ohm that was also included. Oh, also, the screen can flip sides, I guess that's for if you're left handed or are holding it upside down? But yeah, it can do it! There isn’t much else to say about the device beside how tiny it is and how incredibly comfortable it is in my hand. It is a stealthy little thing and would be perfect to take out and about when you don't necessarily want to be seen making big clouds or drawing unnecessary attention to yourself. Great for bringing to work, if you don't have a labour intensive job. If you're in the trades, I would probably look elsewhere as this will cause some grief when dropped and probably wont last the many drops that some other nameless devices can handle (lol).

I would like to thank Eleaf, as well as ELEAF_Tolken, for sending me this device to review. It has been fun playing with a new Eleaf device. Eleaf is a part of my “Quitting Smoking” story as my very first device was an Eleaf iStick TC40W and an Aspire Nautilus X which was given to me by my aunt for helping her move. Who knew that it would lead to all of this.

Thank you very much for reading my review and I hope you go check out the device in the link below.


Cheers!
 
Status
Not open for further replies.

Users who are viewing this thread