eleaf istick Pico TC75W Express Kit in Black
The Eleaf iStick Pico is a tiny, but powerful mod. The eleaf iStick Pico is a versatile Variable Wattage and Temperature Control mod, ideal for both intermediate and veteran vapers looking for a small device for on-the-go.
In Variable Wattage mode, the Eleaf iStick Pico has a 75 watt maximum output. In temperature mode, the mod allows you to adjust between 200-600 degrees Fahrenheit (or 100-315 degrees Celsius), and can support the use of Nickel (Ni200), Titanium (Ti), and Stainless Steel (SS316) wires. You can also dial in a custom TCR (Temperature Coefficient of Resistance) setting. If you enjoy using rebuildable atomizers on mechanical mods, you can set the iStick Pico to Bypass mode to harness the full voltage output of your battery - just like on a mechanical mod.
The iStick Pico does not come with a built-in battery. Instead, it offers the convenience of a user-replaceable battery (not included), so you can quickly swap out a drained battery for a freshly charged one as needed. The battery is easily accessed by unscrewing the protruding cap on top of the iStick Pico. Proper heat dissipation is ensured by the venting holes on the bottom of the mod. You can charge your battery separately with an appropriate Li-ion battery charger (batteries will charge faster using this method), or take advantage of on-board charging, by plugging the included Micro USB charge cable into the USB port on the side of the device and then into a computer.
Much like its name suggests, the iStick Pico is tiny, with ergonomic features. It has rounded edges and a no-slip matte surface so it feels great in the hand. The Pico mod has a spring-loaded 510 connection pin, an easy-to-read OLED screen, a large firing button on the side, and recessed adjustment buttons on the bottom. Because the iStick Pico is firmware upgradeable, it means this tiny beast of a mod will remain relevant in your collection for a long time.
The iStick Pico is feature-rich, user-friendly, and has all standard protections. It can accommodate atomizers with a diameter up to 22mm, like the Joyetech Cubis and others. It is compatible with the protective silicone case here, which helps shield the device from nicks and scratches.
The Eleaf iStick Pico may be small, but don't be fooled by its size - this mod is extremely versatile and it has a lot to offer to both intermediate and veteran vapers. The iStick Pico is perfect for vapers looking for a compact, stealthy vape which can do everything your bigger devices can - it is the perfect going-out mod.
The Eleaf iStick Pico Express Kit Includes:
1 x iStick Pico mod (High Drain Battery not included - use the Make it a Kit menu to grab some at a discount)
1 x Micro USB charge cable
1 x User Manual
1 x Nice display box to keep in when not in use
To read a full list of features please click here.
The Eleaf iStick Pico is a tiny, but powerful mod. The eleaf iStick Pico is a versatile Variable Wattage and Temperature Control mod, ideal for both intermediate and veteran vapers looking for a small device for on-the-go.
In Variable Wattage mode, the Eleaf iStick Pico has a 75 watt maximum output. In temperature mode, the mod allows you to adjust between 200-600 degrees Fahrenheit (or 100-315 degrees Celsius), and can support the use of Nickel (Ni200), Titanium (Ti), and Stainless Steel (SS316) wires. You can also dial in a custom TCR (Temperature Coefficient of Resistance) setting. If you enjoy using rebuildable atomizers on mechanical mods, you can set the iStick Pico to Bypass mode to harness the full voltage output of your battery - just like on a mechanical mod.
The iStick Pico does not come with a built-in battery. Instead, it offers the convenience of a user-replaceable battery (not included), so you can quickly swap out a drained battery for a freshly charged one as needed. The battery is easily accessed by unscrewing the protruding cap on top of the iStick Pico. Proper heat dissipation is ensured by the venting holes on the bottom of the mod. You can charge your battery separately with an appropriate Li-ion battery charger (batteries will charge faster using this method), or take advantage of on-board charging, by plugging the included Micro USB charge cable into the USB port on the side of the device and then into a computer.
Much like its name suggests, the iStick Pico is tiny, with ergonomic features. It has rounded edges and a no-slip matte surface so it feels great in the hand. The Pico mod has a spring-loaded 510 connection pin, an easy-to-read OLED screen, a large firing button on the side, and recessed adjustment buttons on the bottom. Because the iStick Pico is firmware upgradeable, it means this tiny beast of a mod will remain relevant in your collection for a long time.
The iStick Pico is feature-rich, user-friendly, and has all standard protections. It can accommodate atomizers with a diameter up to 22mm, like the Joyetech Cubis and others. It is compatible with the protective silicone case here, which helps shield the device from nicks and scratches.
The Eleaf iStick Pico may be small, but don't be fooled by its size - this mod is extremely versatile and it has a lot to offer to both intermediate and veteran vapers. The iStick Pico is perfect for vapers looking for a compact, stealthy vape which can do everything your bigger devices can - it is the perfect going-out mod.
The Eleaf iStick Pico Express Kit Includes:
1 x iStick Pico mod (High Drain Battery not included - use the Make it a Kit menu to grab some at a discount)
1 x Micro USB charge cable
1 x User Manual
1 x Nice display box to keep in when not in use
To read a full list of features please click here.
