Yeah, it doesn't move at all on my clone. So guessing it might spin on the authentic if it spins on the Erlp.
Erlkonigin and Clone Comparison
- Thread starter jaxgator
- Start date
- th_trl_thread_readers 0
- Status
Yes. Pretty sure it will because I used the auth erlk nano kit to convert my erlp and no spinning / slipping there.
Hmm...
Now that I was thinking about this, my original o-rings kinda swelled a bit over time and it was a headache to insert the original nano poly tank without pinching the o-rings so I exchanged them with a pair of kayfun ones I had... I wonder if... Hum... Will report tomorrow. It's 2 am here
Regards
Tony
Sent from my keyboard through my phone or something like that.
Couldn't wait and put two new original o-rings... Little better but still slips when unscrewing atty. I need thicker o-rings.
Regards
Tony
Sent from my keyboard through my phone or something like that.
Regards
Tony
Sent from my keyboard through my phone or something like that.
These are the glass only for the nano?
I'm trying to find glass for the full size erlkonigin (not ibtanked)
I'm trying to find glass for the full size erlkonigin (not ibtanked)
The erlk nano glass is as big as the kayfun full glass. That's why it fits. To get a full size erlk glass... Don't know. Can't see any other atty with such a long body.
Regards
Tony
Sent from my keyboard through my phone or something like that.
Yeah... I bought the 5 pack of EK glass from FT assuming they would fit, not even close. A least a mm or more too narrow to fit over the base or top. The kayfun quartz glass fits near perfectly but only tall enough for the nano.... Which is adorable btw.
I think the erlkonigin tanks are 39 mm tall, which is pretty tall. But the pmma tanks are 20.7mm wide and so are the glass tanks I bought, but they don't fit.
I didn't know FT had full size glass tanks for the Erlk. Hmm, I broke my IBTanked one. I think I overtightened it on my clone and stressed it since it wasn't quite a perfect fit.
They have them, but they don't fit.
https://www.fasttech.com/products/3023/10011232/2184500-replacement-glass-tank-for-ek-v2-rta-5-pack
The tanks in that link are for the ErlK V2 with the different air flow control which says its 20 not 20.7 so those replacement tanks would be a little smaller. If that helps any.
Posted this in a different Erl thread, here is another option for Erl nano tank, makes it an easy bottom fill. Kayfun clear bell cap from FT, works very well.
And as for the Ubertoot clone FT has, it works quite nicely, starting to see what the hype is about on this, now just have to get my grubby paws on an authentic.
And as for the Ubertoot clone FT has, it works quite nicely, starting to see what the hype is about on this, now just have to get my grubby paws on an authentic.
Is that the kayfun 4 bell cap?
FT told me they weren't ever going to get the Ubertoot clone and I should cancel my order
FT told me they weren't ever going to get the Ubertoot clone and I should cancel my order
Yes it is the KF4 Cap, has to be the clear one though, the frosted will not work without some modifications.
No idea on the Ubertoot, or why you were told that, it is still listed as ships in 7 days. Ordered mine April 16th, shipped next day, got it this morning. So far I like it quite well. A bit overpriced IMO, and not the best clone I've seen, but I wouldn't hesitate to buy it again knowing what I do now.
No idea on the Ubertoot, or why you were told that, it is still listed as ships in 7 days. Ordered mine April 16th, shipped next day, got it this morning. So far I like it quite well. A bit overpriced IMO, and not the best clone I've seen, but I wouldn't hesitate to buy it again knowing what I do now.
I ordered it the beginning of March. A month later they told me they couldn't find a manufacturer.
Yea, I actually first ordered it the day it was listed 3/3/2015, when it failed to ship I cancelled, then people started getting them, so I began ro watch it again, it was listed for a few days as ships next day, that is when I reordered.
Pretty sure these are being made by Coppervape, Limwell is also making them, and it looks much better then this one, at least from what can be told by the pictures. Unfortunately I've yet to find a source, other then direct from Limwell.
It really isn't that much better then some of my other recent purchases, but it is a nice Vape. I still like, and use all my Erlks, both clones, and originals. In some respects I like the Ubertoot better, others the Erl.
Pretty sure these are being made by Coppervape, Limwell is also making them, and it looks much better then this one, at least from what can be told by the pictures. Unfortunately I've yet to find a source, other then direct from Limwell.
It really isn't that much better then some of my other recent purchases, but it is a nice Vape. I still like, and use all my Erlks, both clones, and originals. In some respects I like the Ubertoot better, others the Erl.
The Ubertoot v2 will be available Tuesday April 28 at 3pm EST. There's a pretty active thread here: Ubertoot UTA & UTA2
Despite what they say, I bet FT will soon have a clone version. Think I'll wait for the clone.
Despite what they say, I bet FT will soon have a clone version. Think I'll wait for the clone.
Undoubtedly, I will have to. At the very least, for the price, I want to try it first. Once attys exceed $200, I'm quite hesitant.
Does anyone know who has the nano chimney anymore? I had a couple on order from fasttech but they discontinued them while I was waiting for them to ship, they sent me a refund for them
I looked on focal but didn't see them, but I'm not sure what they call the erlkonigin clones there.
Does anyone have the erlkonigin nano chimneys?
Thanks.
I looked on focal but didn't see them, but I'm not sure what they call the erlkonigin clones there.
Does anyone have the erlkonigin nano chimneys?
Thanks.
I managed to slip in an order for a few chimneys and a whole lot of spare tanks. Just in time.
I've been searching for the complete nano ek when ft discontinued it. No luck, they all seem to be using the same manufacturer.
I'd be surprised if it were different for the chimney alone.
I've been searching for the complete nano ek when ft discontinued it. No luck, they all seem to be using the same manufacturer.
I'd be surprised if it were different for the chimney alone.
When I ordered the first one I got the nano chimney and tank. Then when I wanted to place another order the "kits" were discontinued, so I had to order the Nano tanks and chimneys separate. Well they split the shipment, I got the nano tanks, but emailed me and cancelled the chimneys before they shipped.. .
So I got 3 nano pmma tanks but no chimneys.
So I got 3 nano pmma tanks but no chimneys.
When I ordered the first one I got the nano chimney and tank. Then when I wanted to place another order the "kits" were discontinued, so I had to order the Nano tanks and chimneys separate. Well they split the shipment, I got the nano tanks, but emailed me and cancelled the chimneys before they shipped.. .
So I got 3 nano pmma tanks but no chimneys.
I've been searching for an Erlk Nano/parts too. Haven't found them anywhere...
- Status
