heres one for those looking for a lanyard for your joyetech Mod (eVic or flat top mod, will work with other mods also with some tinkering)
if you look on the bottom of your evic or flat top mod, youll notice a small "air hole" thru the battery cap. this is of course as stated an air hole, but if you take the battery spring out, youll notice that, on the bottom of your spring, there is a small bent "hook" ( for the lack of a better description)
get yourself an ego lanyard, the one thats an actual "joyetech" brand. it has a very strong small diameter cord that has a small jewelry clasp on it. this clasp isnt tied on, its looped on. remove it, and tie a small knot in the small cord, about half way up.
now on some joyetech mods, the air hole is larger than on others, so you may need to drill the air hole a bit bigger ( 1/16" of an inch) to get the cord thru. remove the spring and feed the cord thru until you can pull the knott thru. then, loop the part of the cord CLOSEST TO THE SILVER STOP/CONNECTOR on the lanyard onto the hook. reinstall the spring and put your battery cover back on your mod. and low and behold, an eVic (or other mod) lanyard!....this works very well with no issues. (flat top joyetech head on evic tube pictured)



if you look on the bottom of your evic or flat top mod, youll notice a small "air hole" thru the battery cap. this is of course as stated an air hole, but if you take the battery spring out, youll notice that, on the bottom of your spring, there is a small bent "hook" ( for the lack of a better description)
get yourself an ego lanyard, the one thats an actual "joyetech" brand. it has a very strong small diameter cord that has a small jewelry clasp on it. this clasp isnt tied on, its looped on. remove it, and tie a small knot in the small cord, about half way up.
now on some joyetech mods, the air hole is larger than on others, so you may need to drill the air hole a bit bigger ( 1/16" of an inch) to get the cord thru. remove the spring and feed the cord thru until you can pull the knott thru. then, loop the part of the cord CLOSEST TO THE SILVER STOP/CONNECTOR on the lanyard onto the hook. reinstall the spring and put your battery cover back on your mod. and low and behold, an eVic (or other mod) lanyard!....this works very well with no issues. (flat top joyetech head on evic tube pictured)


