Few Questions

[my2heartboys]

As those of you who read my earlier post, you know that I am looking at getting some higher voltage pv's. I do have some questions though.

1. Juices....Are there any juices that I should steer clear of at higher voltages?
2. 306 threads....Are these the same as the 510s or will I need to purchase adapters? If so, how are these adapters cleaned?
3. Attys.....At what voltage does one need to switch from a LR atty to a HV atty?
4. Where can I get some glass drip tips?

Ok, well, I had some other questions in mind....but my train of thought jumped the tracks.

Thanks,

Anne

 

[Java_Az]

As those of you who read my earlier post, you know that I am looking at getting some higher voltage pv's. I do have some questions though.

1. Juices....Are there any juices that I should steer clear of at higher voltages?

Not that i know of , but variable voltage mod would let you adjust to a suitable voltage for any juice or atomizer.

2. 306 threads....Are these the same as the 510s or will I need to purchase adapters? If so, how are these adapters cleaned?

Yes they are the same threads. Alcohol cleans them real nicely

3. Attys.....At what voltage does one need to switch from a LR atty to a HV atty?

You missed regular ohm atomizers. they go in the middle. LR for me anyways i dont vape at more then 4.2 volts but i have heard of folks going to 5 volts with them. Regular ohms i dont run any higher then 5.5 volts and that is rare. HR atomizers i have never used but most use them on 6 volt mods or higher.

4. Where can I get some glass drip tips?

Dont know never seen any glass ones

 

[Icoth]

2. I have to disagree with Java-Az, a 306 will work on a 510 battery without an adapter. Drip tips are not interchangable however.

4. These folks sell pyrex drip tips, though I've never bought any: TheEcig.com is proud to announce the FIRST EVER PYREX DRIP TIP!!!!!!!!!!!!!!!!!!!!They have been hand blown by are partners at Garduno Glass!!! The most comfortable drip tip out there on the market!! The liquid drips easier and the airflow is phenome

 

[Java_Az]

yup my bad a 306 will work with a 510. Don't know what the hell i was thinking. I will just blame it on not enough coffee running threw my veins yet

 

[my2heartboys]

After getting my first LR atty, well, I was hooked. I don't know if I could go back. Flavor and vapor production are soooooo much better, but will try one at a higher voltage.

OK, gotta go at the moment. BB to look and see if I have anymore questions.

___________________________________________________________________________________________
You missed regular ohm atomizers. they go in the middle. LR for me anyways i dont vape at more then 4.2 volts but i have heard of folks going to 5 volts with them. Regular ohms i dont run any higher then 5.5 volts and that is rare. HR atomizers i have never used but most use them on 6 volt mods or higher.



Dont know never seen any glass ones[/QUOTE]