Finally done creeping

Status
Not open for further replies.

Susan~S

ECF Guru
ECF Veteran
Verified Member
Mar 12, 2014
16,937
11,693
68
Mpls/St.Paul, MN
Right now I currently use a SMPL (copper) with Freakshow atty. Seems to hold up pretty well, i've always liked the recessed button mods for safety reasons. The navy more or less frowns upon vaping, they treat it just like smoking cigarettes, at least my command does. It used to be alright like 2-3 years ago. You'd be able to smoke in your workcenter (i work in a welding shop so ventilation isn't an issue) but now that everyone practically does it, they make you go out to a smoking sponson to take a few hits. Pretty ridiculous if you ask me.

I do have a question for you though, I plan on making my own juice. I've bought some flavoring and a small 235ml bottle of pre-mixed 3mg 20/80 PGVG from baker. I was looking online and figured i'd need more pre-mixed stuff and came across NudeNicotine? They have this stuff:

"3mg/mL – 36mg/mL Nicotine Base

Our pure nicotine base solvated in USP grade propylene glycol (PG) and vegetable glycerin (VG), ready to be flavored. This is the purest nicotine base on the market, and each quantity comes with certificate of analysis (COA), guaranteeing its purity. Click here to view our most recent certificate :) There is ABSOLUTELY NO taste, so flavor away to your liking and enjoy! These dilutions of nicotine base are perfect for the formulator who prefers to deal with lesser nicotine concentrations than 100mg/mL. Dilutions remain simple at this concentration and is a much less volatile solution to handle :) We also ensure each package of our nicotine base is adequately packaged and safely shipped to your door. For more information on the anatomy of a Nude Nicotine package, click here. Stay up to date with nicotine base stock information – subscribe to the Nude Nicotine Chemist’s Corner Newsletter to up-to-date product information and status alerts :)"

And was wondering if it was the same thing, like I just put this stuff in a 30ml dripper and add flavoring? I'm very new when it comes to making my own stuff so I don;t wanna buy all this stuff and then turns out i ordered the wrong thing :/

p.s. sorry for the long quote it wont let me post a link to nudenicotine
 

lamarrk

Moderator
ECF Veteran
Verified Member
Mar 5, 2013
2,822
1,218
73
Huntsville, Alabama (Rocket City), USA
Welcome to ECF, ORV Gentry and thank you for your service.

Once you get your 5 posts in, head over to DIY E-Liquid where you'll find plenty of answers to your DIY questions. Just a couple more replies to posts here will get you over the hump and set you free to roam the forum.
 

Susan~S

ECF Guru
ECF Veteran
Verified Member
Mar 12, 2014
16,937
11,693
68
Mpls/St.Paul, MN
Right now I currently use a SMPL (copper) with Freakshow atty. Seems to hold up pretty well, i've always liked the recessed button mods for safety reasons.

The most important thing when using a hybrid top cap mech mod is making sure the pin of your RDA/RTA is long enough.

Hybrid Top Caps & Battery Failure

I plan on making my own juice. I've bought some flavoring and a small 235ml bottle of pre-mixed 3mg 20/80 PGVG from baker. I was looking online and figured i'd need more pre-mixed stuff and came across NudeNicotine? They have this stuff

If you order the 3mg/ml nicotine base from Nude Nicotine it should be the same concentration as what you bought from Mt Baker Vapor.

3mg/mL - 36mg/mL Nicotine Base.
Plus Nude Nicotine is known for not having a "peppery taste". http://www.e-cigarette-forum.com/forum/diy-e-liquid/298547-nicotine-comparisons.html

For all things DIY head on over to the DIY ELiquid Forum. You will not be able to post there until you get in your first 5 posts and the servers update at :25 past the hour. Lots of great info in all the "stickies"

Recommended Reading For People New to DYI

For a juice mixing calculator consider using eJuiceMeUp

Here are some threads you may like to read through for different flavoring companies. Many of the posts include recipes and comments about a specific flavor.

1. Flavor Arts (FA) - Pure Vapes has 3ml FlavourArt flavorings
2. The Flavor Apprentice (TFA) - The Flavor Apprentice Flavoring Thread => Also see Bill's Magic Vapor Blogs
3. Inawera (IW) - Inawera - a few reviews
4. Capella (CAP) - http://www.e-cigarette-forum.com/forum/diy-e-liquid/637270-diy-capellas-recipe-thread-v2-0-a.html
5. Hangsen (HS) - The Hangsen Thread
6. VapingZone (VZ) - New Super Concentrated Flavors & New Super Concentrated Flavors - Part 2
7. Flavor West (FW) - Flavor West DIY flavor review

DIY Recipe Sites

* ECF E-Liquid Recipes <= Feel free to post your recipes here for all members to enjoy
* EcigExpress Archive Cookbook
* E-Liquid-Recipes: http*:*//e-liquid-recipes - (Remove *'s - forum automatically striped this link)
* UK E-Liquid Recipes
* kritikalmass - E-Liquid Recipes
* One Stop DIY Shop - Recipes
* Reddit Recipes - Read the Sidebar
 

eric1565

Full Member
Apr 16, 2015
8
4
houston tx
  • Deleted by classwife
  • Reason: Spamming for post count

DingerCPA

Vaping Mistress
ECF Veteran
Verified Member
Apr 9, 2014
9,020
61,413
Corn 'n' Cows
Right now I currently use a SMPL (copper) with Freakshow atty. Seems to hold up pretty well, i've always liked the recessed button mods for safety reasons. The navy more or less frowns upon vaping, they treat it just like smoking cigarettes, at least my command does. It used to be alright like 2-3 years ago. You'd be able to smoke in your workcenter (i work in a welding shop so ventilation isn't an issue) but now that everyone practically does it, they make you go out to a smoking sponson to take a few hits. Pretty ridiculous if you ask me.

I do have a question for you though, I plan on making my own juice. I've bought some flavoring and a small 235ml bottle of pre-mixed 3mg 20/80 PGVG from baker. I was looking online and figured i'd need more pre-mixed stuff and came across NudeNicotine? They have this stuff:



And was wondering if it was the same thing, like I just put this stuff in a 30ml dripper and add flavoring? I'm very new when it comes to making my own stuff so I don;t wanna buy all this stuff and then turns out i ordered the wrong thing :/

p.s. sorry for the long quote it wont let me post a link to nudenicotine

Welcome aboard ORV Gentry, and thank you for your service!

You'll get some great info from the DIY thread, but long story short, you'll slightly lower your nic and will dilute your PG/VG ratio when you add flavorings to your unflavored base. If you mix up 10mL where 20% is PG flavorings and the rest is your 3mg 20/80 base mix, you'll end up with ending PG/VG of about 36PG/64VG and a nic level of 2.4mg (80% of 3mg/mL in a 10mL mix) (10% flavoring would yield 28PG/72VG at 2.7mg/mL nic, and 30% flavoring would get you 44PG/56VG at 2.1mg/mL nic, just to give you an idea) I get 100%VG nic at a much higher level than I want my ending mix to be and then dilute with 0mg VG or PG/VG. If you don't have a lot of storage space, you might even get 6mg unflavored VG nic and let the flavorings dilute to a closer PG/VG and nic level you want.

Read the blogs by Hoosier, Dannyv45, and even Bill's Magic Vapor. Hoosier and Danny have lots of tips and tricks and things to watch out for while mixing. Bill has a ton of recipes and recommendations on what is considered High Flavor Mixes (HFM). I have made a number of his recipes, and they are pretty much ready to go right away (don't need to let them steep)

Good Luck, and come home safe and soon!!!
 

ORV Gentry

New Member
Apr 16, 2015
4
1
Cleveland, OH
  • Deleted by retired1
  • Reason: Unregistered business discussions are not allowed on ECF

Susan~S

ECF Guru
ECF Veteran
Verified Member
Mar 12, 2014
16,937
11,693
68
Mpls/St.Paul, MN
We cannot comment on your question as it violate ECF's "Terms of Service".

1. New Members - DON'T post about business ideas!
2. http://www.e-cigarette-forum.com/forum/ecf-forum-rules/51178-forum-rules.html

Specifically:

17. Advertising/Selling in posts
a. You must not use this forum for advertising. Any post that seems to have been made for advertising will be deleted. Registered Suppliers may advertise subject to compliance with their specific rules. Members wanting to sell, trade and/or buy e-cigs and e-cig related items from other members may only post these items in the Classified section.
b. Shilling (commercial and/or excessive promotion) is not permitted. This includes affiliate codes/links, links to Unregistered or Banned Suppliers, and links to sites of dubious quality/content/reputation in signatures, blogs or forum posts.
c. Employees of a vendor or any person commercially affiliated with a vendor are not permitted to discuss/advertise the business or products of the vendor.
d. Pre-advertising: no business-related posts are allowed anywhere on ECF unless registered as a supplier. Potential suppliers (not yet actualized) cannot post anything business related anywhere on ECF
.
 
Status
Not open for further replies.

Users who are viewing this thread