First DIY materials on the way

[chadlrsn]

So I have made my first purchase to DIY my juice. Bought everything from myfeedomsmokes.com just to get it all ordered from one place. They seemed to have what I needed.

Here is my list please let me know if I am missing anything that I need or must have right now.

Pg 250ml
Vg 250ml
6 flavors
3ml syringes
3ml dropper bottles
Some small mixer vials

Starting small for now and will bulk purchase and stock up if I like it and can do it.

Thanks all and have a great day.

 

[PRIMER]

Don't see nic on there...
You prolly want at least one drippable atomizer too to test your mixes out with.

 

[chadsmo]

I've got some Lorann's flavours and PG/VG that i've been playing with a bit already. Then on monday I get a bunch of TPA and FlavourArt flavours as well as some bottles and 100ml of 50mg mic PG.

 

[Vash]

Don't see nic on there...
You prolly want at least one drippable atomizer too to test your mixes out with.

I agree Get atty for testing flavors and plenty of bottles and start with small batches.Also start low on flavorings as it is much easier to add more than fix something that has to much.Make sure if you are using syringes for flavorings to rinse well as to not get flavor from one batch mixing into a new one.Happy mixing!!! Let us know how your first mixes turn out

 

[chadlrsn]

I am not using nic just the pg and vg. I have been 0 nic for 2 months now. Just like the hand to mouth and flavor.

I have 2 vision clearomizers and some generic clearomizers as well do you think atty would be better? Kinda wanted one for each flavor and the vision ones are fully cleanable. What atty would you recommend? Could you post a link to one? I have only used clearomizers.

The flavors I got are LA flavors. Just got 6 different ones to try. I was thinking on making 1ml batches at first till I get flavors down.

I Got syringes for each flavor and one for pg and vg each just to make sure I don't cross contaminate.

I will let you all know for sure!

Thanks again.

 

[Vash]

https://www.ikenvape.com/searchresults.asp?cat=1830 Check out these and getwhat ever ohm atty works best for your devices.I have a 3.0 ohm for my vv device and a 1.8 ohm for set voltage devices.

 

[PRIMER]

Yeah, you definitely dont want to be filling and cleaning clearos just to taste test.

http://www.ecigexpress.com/manager-...esistance-atomizer-drip-tip-single-pack-p-949

This is what I got with my first DIY kit, and this thing is awesome!
No learning curve, just drop a couple drops in for a couple HARD hits.
I don't bother even cleaning it, just hit until it tastes a bit fried and then drop in the next flavor.
MANDATORY for DIY.

 

[Slots]

Didn't see where you mentioned a calculator to do all the mental work.
Go to "eJuice Me Up" (sorry don't have a link), and download the calculator.
They also have tons of recipes and explain how to get them too.
Start out with 3ml batches in case you don't like it. You can always make a bigger one
TAKE NOTES on everything you make ... you may like it and won't be able to repeat it !
You could also use some 1ml droppers and Amazon has some of those.
I assume you have lots of little 5ml bottles saved from sample packs.
Don't forget the disposable rubber gloves (hardware store)
Have fun

 

[klynnn]

I would get some bigger bottles to mix in. After you get going you will want a bit more and will add a drop or five here or there. I don't buy anything less than 15ml anymore usually 30 at least. You can start with 3ml but just do it in bigger bottles that don't keep tipping over.

 

[chadlrsn]

I have a couple calcs on my phone I have been playing with to see how they work.

Thanks for the advise on the addy. I will for sure look into getting one.

Have bigger mixer storage bottles that I will use but just got some 3ml drippers to fill with for now. With me just starting I did not want to spend a ton and end up not liking it. I am sure I will though.

I got a spiral note pad just for the DIY already have a ton of info already down in it.

Keep the advise coming I appreciate all of the input and info.

 

[klynnn]

If you want a sweetener buy ethyl maltol crystals and mix 1/4 tsp to 10 ml of pg. I keep a 30ml bottle on hand just for mixing.

 

[PRIMER]

I would get some bigger bottles to mix in. After you get going you will want a bit more and will add a drop or five here or there. I don't buy anything less than 15ml anymore usually 30 at least. You can start with 3ml but just do it in bigger bottles that don't keep tipping over.

+1
These are great. They are marked every 10ml on the side, have a built in cap, and the tip is easy for transferring to 3ml and 10ml bottles.

50-ml Plastic Squeeze Bottle | Shop Hobby Lobby

It works better to only fill the bottle like halfway with your batch, then shake the crap out of it (capped).

 

[chadlrsn]

I will look at getting something like this when I get going for sure.

I just bought the addy tips you recommended. Should have them about the same day as the fluids and stuff.

Thanks!!

 

[klynnn]

Ha Ha primer I have those and bigger. I make 150ml a month for me and another. They work great, I just use them to fill my novas. I have tons of tiny bottles stacked in plastic bags from when I started. Now I use them to let friends try stuff.

 

[chadsmo]

I have a bridgeless atty on the way for testing juice. Should be here Friday with my IGO L rba , stoked.

 

[PRIMER]

1ml batches

lol........

 

[bigbells]

I'm just a couple of days behind you, having placed my order at Myfreedomsmokes today. Added some smaller bottles, a beaker, some gloves and 48mg/ml nic juice.

 

[chadlrsn]

So far I have learned a ton from reading up on here and other places. Just cant wait to get my shipment so I can start actually trying out everything.

I think it is going to be fun and a lot more learning to happen.

 

[Shilo]

Lot of useful info and fellow DIYers here DIY E-Liquid