first purchase spare parts needed?

[RT88]

hi, thank you for the great info. i just purchased the following based on recommendations here

Vision Spinner VV eGo Battery 1300mAh
The Joye eGo-C Twist Variable Voltage 900mAh Battery

Kanger MT3 eGo B/C Clearomizer
Vision Ego Clearomizer 2.0 also known as Vision Ego Clearomizer V3
eGo CE4 PLUS V2 Clearomizer

w/ ego usb charger and juice. what spare parts would i need to rebuild these? wanted to try out some of the most talked about

 

[Satava]

I would get a second battery if you didn't already. Nothing worse than a nic-fit while it's charging. I like the non-vari USB batteries with low resist clearos when I'm gonna be at my computer / in my vehicle and would use the twist when not connected to power.

The clearos should just need a few new heating elements, probably 5 or so to start. I'd get a second clearo or even a third also just in case it drops / falls / breaks / etc.

A case is a good thing to have too. The eGo cases that look like modified Sony PSP cases are very popular but I'm not sure it'd be long enough for 1300mah battery with a clearo. I use one of these for my backup eGo, APV, RBAs, tanks, 60ml juice, etc-
http://www.walmart.com/ip/Vaultz-Protective-Medicine-Case-1-Pk/13864190

 

[Boiler]

Silica wick and 32awg kanthal would work for a start. And a multimeter so you don't blow your batteries.

 

[RT88]

i can't visualize it yet since i'm waiting on USPS priority mail. I'm planning to wash them out with hot water and dry before use as i read here. prime with 1 drop and dry burn 2 sec. are there parts in the clearo that should not get wet? have not read it, i guess not since its in juice anyway

i'm going to eval the two batteries and 3 clearo and check out what parts they need, thanks

 

[Lowlife]

A case is a good thing to have too. The eGo cases that look like modified Sony PSP cases are very popular but I'm not sure it'd be long enough for 1300mah battery with a clearo. I use one of these for my backup eGo, APV, RBAs, Tanks, 60ml juice, etc-
http://www.walmart.com/ip/Vaultz-Protective-Medicine-Case-1-Pk/13864190

The 1300 mah spinner is actually shorter then the 1000 mah twist.

Side by side


(picture taken from web)

 

[stacee jaxx]

hi, thank you for the great info. i just purchased the following based on recommendations here

Vision Spinner VV eGo Battery 1300mAh
The Joye eGo-C Twist Variable Voltage 900mAh Battery

Kanger MT3 eGo B/C Clearomizer
Vision Ego Clearomizer 2.0 also known as Vision Ego Clearomizer V3
eGo CE4 PLUS V2 Clearomizer

w/ ego usb charger and juice. what spare parts would i need to rebuild these? wanted to try out some of the most talked about

Did you get the wall plug for the usb charger ?

 

[deserte4gle]

depending on ur budget... its better to save n spend one off n go for provari/zmax coz if u start with ego n etc, u will upgrade ur device once u see ur mates have a better setup than urs... just go straight to a high end batt.... the choices of tanks are very subjective.... for me, i prefer vivi nova from vision or smoktech n i wud say no to carto~... cheers buddy!

 

[RT88]

Did you get the wall plug for the usb charger ?

no they were out, will it be bad for my laptop? or just take a long time to charge.

i see what u mean deserteagle if i upgrade i can give to some people i know who are still smoking de olde fashioned way haha

 

[eratikmind]

no they were out, will it be bad for my laptop? or just take a long time to charge

Do you have a USB wall plug for your other devices, such a cell phone? That's what I have been using.

 

[RT88]

yes i have a couple for a bluetooth and something else. i'll try it thanks

 

[StillHere]

get more batteries and at least 1 extra charger for the car

 

[RT88]

good idea for the car. I still have not had the guts to dry burn any wicks yet. I notice the Kanger MT3 has stubby lil wicks. I've tried another clearo, eGo CE4 PLUS V2. i'm really liking this more. small chamber at 1.6mL max fill but very long wicks. It also matches this eGo Twist 900 perfectly! i'm really loving the balance and feel of this. My 1300 spinner seems clunky and heavy. made a red mark w/ a sharpie at 3.8v

blue 900 and light blue CE4 are a beaut, the chrome sleeves match up like they were made for each other [both eGo]. Also trying a coconut from MBV. its been in the bottle 5 or 6 days having shipped monday. Lil sweet but not overly so. i did 18mg 50/50 +1 shot. seems thick so i added 2 drops of reverse osmo filtered water and it thinned out in the clearo.