Flash-e-Vapor V2 rba by Artur Schwarze
- Thread starter dice57
- Start date
- th_trl_thread_readers 0
- Status
Yeah, some people just replace it with a screw or something I think. Just wondering if you've heard that at all
Mine finally showed up today! Took nearly a month, but its here. Gonna do some crazy building tonight and have a good time with it. Got a 1 foot by 1 foot section of 400 mesh lined up, planning on just doing mesh feeders and japanese cotton in the coil or rayon. leaning towards japanese because I don't want the sag factor of rayon
Congratulations
Brickfollett and Wammus.
I look forward to hearing about how you both like them. Pics on your mods too.
Brickfollett and Wammus.
I look forward to hearing about how you both like them. Pics on your mods too.
Couldn't get it to wick with 400 mesh. Used 50 mesh, which is wicking, but way too much. That 50 mesh is a pain to shape too lol. I'm gonna try doing a 400 mesh sleeve inside the 50 mesh. My juice is pretty thick so it needs to move, but obviously not flood. Good airflow with the screw removed, too tight for my taste with any of the screws
I've actually switched to 110 mesh. I found it a good balance when switching between different juice viscosity. I think your plan of wick-in-wick is great. Let us know.
Edit. I got a bunch of different 4"x4" mesh grades from Bennythestooge on ebay.
Edit. I got a bunch of different 4"x4" mesh grades from Bennythestooge on ebay.
Both my FEV's are wicking nicely with 400 mesh straws. My juice is fairly thick- 90% VG. Taste was very muted until I lowered resistance to 0.7-1.0 ohms. If you are having problems wicking, I suggest you roll the mesh straws until they slide freely in their holes. There has to be room for air bubbles to go up the straw.
My 350 mesh is just like a straw. Only about 15mm wide. Enough for about 2 wraps or so. Wide open and slides too.. 90-100vg. I tried a variety of methods and this works best. The only time you may flood is if a straw falls out or isn't touching the wick and is jostled heavily.
I run air wide open too at 25w.
I run air wide open too at 25w.
Last edited:
If the 400 isn't working, just use less. or can try wrapping it around something small (like a paperclip, etc), so that it stays more straw-like in the center
Still damn satisfied with FEV.
Had a thing with this new "subtanks", but the flavour isn't there and the heads cost a lot.
Just ordered a original Dripcap from Arthur and a spare from Focalecig with some clear tanks.
SHOULD tweak my feeders, not keeping up in chainvaping with 70+ VGs, but too lazy (If you can vape it, DON'T mess with it!).
Maybe a larger hole, currently wrapped aroun 1.2 mm screwdriver from 325.
Sent from my iPhone using Tapatalk
Had a thing with this new "subtanks", but the flavour isn't there and the heads cost a lot.
Just ordered a original Dripcap from Arthur and a spare from Focalecig with some clear tanks.
SHOULD tweak my feeders, not keeping up in chainvaping with 70+ VGs, but too lazy (If you can vape it, DON'T mess with it!).
Maybe a larger hole, currently wrapped aroun 1.2 mm screwdriver from 325.
Sent from my iPhone using Tapatalk
I'm still vaping the flashi daily. Becomes a little temperamental with 90+VG and sub zero conditions. Lol, but throw the dripper on and youve got no problem. Its still an adv for me. Finally thinking of venturing out to try one of the newer tank systems. The flashi is still the only tank I use.
I got a FEV3 coming. Sedge finally convinced me I needed to get one. Definitely exited to finally get my hands on one, and see why the people who have them, love them so much.
Didn't get the dripper top (I just don't drip anymore at all), got the tank extension, long chimney, o-rings, short airduct (short tank mode on this would be pretty awesome), and poly tank. I'll be set.
Didn't get the dripper top (I just don't drip anymore at all), got the tank extension, long chimney, o-rings, short airduct (short tank mode on this would be pretty awesome), and poly tank. I'll be set.
Last edited:
LOL, Focal just list a 32.5mm Flash E!
It's missing the little tab though, so you'll constantly be trying to line up the air hole to the coil. No pics of the deck. And looks like it includes long and short mode (because there's 2 "duct" pieces), but no extended tank shown. Does have the dripper cap tho
It's missing the little tab though, so you'll constantly be trying to line up the air hole to the coil. No pics of the deck. And looks like it includes long and short mode (because there's 2 "duct" pieces), but no extended tank shown. Does have the dripper cap tho
http://www.digitalsteam.de/HERSTELLER/Flash-e-Vapor-V3-VS/King-Artur-V2-by-Doomsplasher::961.html
Looks like it's snazzy accessories and tank pieces for the Flash-E
- Status
