Focalecig ... A new Fasttech??

[Keymaster4225]

Oh I'm with ya, my Vela's NEVER leave the house .. and here is a cut and paste from my review about adjusting the fire pin in the Caravela ..

The dual adjustable copper positive contact pin can be adjusted one of two ways. The upper portion of the pin adjusts (with pliers to initially loosen, and back out the upper pin, after that you can adjust it with your fingers) for flush mounting of your top device. The lower portion of the pin is used to adjust for battery rattle with flat top batteries. Using flat top batteries with this mod will make for the easiest, and smallest amount of adjusting.

However, in the case of nipple top batteries, you will need to remove the entire lower portion of the pin in order to close up your tubes. This will initially result in battery rattle, so you will need to further adjust the upper portion of the pin (unscrew outward), as well as adjusting the 510 connection of your top device (also outward to make contact) in order to reduce the battery rattle once the lower pin is removed. This will stop battle rattle with normal use of the mod (picking up, setting down) however, if you shake the mod around, you will hear the battery move a little …. So don’t do that.

Thanks a bunch. Got it flush mounted by screwing in the 510 contact on the TGT slightly.

 

[Corpse]

Damn Laylel is putting Nikki to work! ... That is actually a good idea, but that is going to take some work ... Even I can't remember where everything is in this thread, but it would be useful to have so .. I guess I'll have to work on that.

Go Nikki! You can do it!

Couldn't resist it! Had to order a kayfun! And to make it company on the trip, a 3D is also coming...

 

[Skorpeyon]

I had to order a few items myself. Nothing big, but I have an omega clone coming now.

 

[Laylel]

Damn Laylel is putting Nikki to work! ... That is actually a good idea, but that is going to take some work ... Even I can't remember where everything is in this thread, but it would be useful to have so .. I guess I'll have to work on that.

If you always know where to spend ppl money he-he, i always know what is not done yet lol (now feel sorry for my hubby, hi has to listen "to do" list every day )

 

[Skorpeyon]

Also got a maraxus and lotus clone just because together they remind me of a sonic screwdriver from Doctor Who...

 

[TheBiloi]

I bought a nemesis clone and an omega rda clone about six days ago and paid the $1.50 charge for tracking but for the life of me can't figure out how to actually track it. I've tried inputting my paypal transaction id from my receipt into the ordertrack section but the button is unresponsive. Doesn't show me anything at all.

 

[Laylel]

I bought a nemesis clone and an omega rda clone about six days ago and paid the $1.50 charge for tracking but for the life of me can't figure out how to actually track it. I've tried inputting my paypal transaction id from my receipt into the ordertrack section but the button is unresponsive. Doesn't show me anything at all.

Did you get you nemmy from group buy or on reg base?

If on group buy your order would't be shipped till april 11 or bit a later.
If reg base processing order time usually 3-7 days (it must be mark on item when you order it). If one of an items is longer in processing time, order will be shipped when HOLE order will be ready.

In both cases follow this going from step what works for you

Happened to me. My PP on one e-mail, my common use is other. Well. It does read your PP e-mail as log in e-mail.
Login with your PP e-mail, as "first time" user create a password.
You are in
Left top corner - your e-mail/login - is link - poke
Find a button - my orders - poke
Find your order - poke
Window divided on 2 parts. In top part - right bottom corner - trucking number (in case of kayfun what is on group buy right now, item will not be shipped before April 11, so it would't be there till then or later)

 

[Nikkita6]

I had to order a few items myself. Nothing big, but I have an omega clone coming now.

Make sure you see PhatRon's photo demonstration for wicking the Omega which is one or two pages back from here ... apparently the height of the walls surrounding the deck make it tricky to get the coil into the wick holes, but Phatron demonstrates how he did it.

 

[Nikkita6]

I bought a nemesis clone and an omega rda clone about six days ago and paid the $1.50 charge for tracking but for the life of me can't figure out how to actually track it. I've tried inputting my paypal transaction id from my receipt into the ordertrack section but the button is unresponsive. Doesn't show me anything at all.

See Laylel's instruction above for tracking your order via the website. She didn't quote you but her response is for you.

 

[Nikkita6]

Go Nikki! You can do it!

Couldn't resist it! Had to order a kayfun! And to make it company on the trip, a 3D is also coming...

... That 3D dripper makes me think that I should have gotten a Nemmy a while ago

 

[Laylel]

See Laylel's instruction above for tracking your order via the website. She didn't quote you but her response is for you.

ooops gona fix it


I got my IMR 18350 batteries from FT today. All my mods are like babies now)))

 

[PhatRon]

And make sure you clean the supplied drip too with the Omega. Mine had some gnarly machine oils in it and on it too. If I attempt a dual coil build I will post some pictures of a step by step or next time I do a single coil build I will too. Also when I installed the coil I unscrewed the post screws all the way out so they would not get in the way at all

 

[f1vefour]

Uggg, 12 days since I ordered and my Stingray still isn't tracking.

I think my package is in a black hole.

I took this picture today on my way home from work, I was hoping it led to my mailbox full of vapemail...nothing

 

[Laylel]

Uggg, 12 days since I ordered and my Stingray still isn't tracking.

I think my package is in a black hole.

I took this picture today on my way home from work, I was hoping it led to my mailbox full of vapemail...nothing

Pisc is so so gorgeous. Nothing can be created more beautiful then nature creation.

My batteries was sitting for 2 weeks in china - no update, and today they just come strait to my house. I don't even check trucking numbers anymore, just getting myself upset about it.
Hopefully you mail is just not scanned somewhere.

 

[f1vefour]

I like that initial scan since it gives me anticipation, the rest I don't care about.

That rainbow was beautiful, much more vivid than the picture represents.

 

[funkyrudi]

300 Kayfun Lite + and 499 Nemeses are sold on group buy. Who does no 500? I already ordered a pair each.

 

[funkyrudi]

Uuupps, my group buy kayfuns were already shipped. Thanks Doris

 

[f1vefour]

So my Stingray finally shipped on the 13th day, not a good first experience Focalecig...not at all.

 

[Nikkita6]

Fivefour what was the date that your tracking# was assigned? I am wondering if there is a way to find out if other orders that shipped on the same day are having the same issue?

Uggg, 12 days since I ordered and my Stingray still isn't tracking.

I think my package is in a black hole.

I took this picture today on my way home from work, I was hoping it led to my mailbox full of vapemail...nothing

 

[Skorpeyon]

Make sure you see PhatRon's photo demonstration for wicking the Omega which is one or two pages back from here ... apparently the height of the walls surrounding the deck make it tricky to get the coil into the wick holes, but Phatron demonstrates how he did it.

I did see that, thank you! I've honestly never built my own coils and am just getting started, but I understood what he was saying. I mainly wanted to get these RDAs because the official ones are so expensive, if I end up hating rebuilding I really don't want to be out a ton of money for it! And I'm fine with the long shipping since I have another clone coming in the mail from another supplier today but my cotton and wire are still going to take a while.