Interesting new dripper design on the New Arrivals page at FC called "Apollo Style Rebuildable Dripping Atomizer"
Focalecig ... A new Fasttech??
- Thread starter Nikkita6
- Start date
- th_trl_thread_readers 0
-
- Tags
- china vendors fasttech
- Status
Aww .. this is spoiling my anticipation for the V2, it looks so beautiful in the pics. I don't like the V1 its so basic looking, but the V2 looks sweet, but if its so big I am not sure that it will be sweet enough.
I tried golfing too, couldn't see the sense in chasing a ball around filed but did discover it's great fun to throw a handful down range and shoot at them. They are challenge to hit with a handgun and sometimes when hit just right they take off like they were hit with a driver LoL.
I'm sorry, wasn't trying to soil the corn flakes but it is pretty big.
it's dual 18650. it will be bigger than a single 18650
but man, that tibs mod I made from the co-op is THE smallest dual 18650 out there (and regulated)
but man, that tibs mod I made from the co-op is THE smallest dual 18650 out there (and regulated)
NiceDoris, she treats me so bad sometimes
My Hana has been sitting in "collecting products" for 2 days now.
I had a boss that got me into golf. Spent a few thousand in clubs and gear. Probably worth a few hundred now. I still play a few rounds every year with friends. Lately, it's been more like drinking outside and getting interrupted by having to hit a little white ball every few mins.
About 15 yrs ago, I quit my job and moved out to LA, CA. I took 6 months off and just played golf. I got down to about a 14 handicap before starting to work again. Never came close to those scores since.
Nikki, by V2 are you meaning the round one they are coming out with or the V2 of the box? Mine is the V2 of the box.
Whoosh, from out of nowhere :
I'm looking for these juice bottles, in case any of you happens to come across one:
OK,back to your big boxes...
:I'm looking for these juice bottles, in case any of you happens to come across one:
OK,back to your big boxes...
Whoosh, from out of nowhere
I'm looking for these juice bottles, in case any of you happens to come across one:
OK,back to your big boxes...
Search "VR bottle" at VapeRev. $2 each. I've seen cheaper else where but i can't remember where and it may have been overseas so probably not worth it after shipping.
Over a week of waiting for my shipment from the USA warehouse to Toronto... I figured my order was just stuck at customs... but then I receive this tracking message.
2014-11-06 11:46
JACKSONVILLE, NC 28546, Delivered, Your item was delivered at 11:46 am on November 6, 2014 in JACKSONVILLE, NC 28546.
Not very happy right now
2014-11-06 11:46
JACKSONVILLE, NC 28546, Delivered, Your item was delivered at 11:46 am on November 6, 2014 in JACKSONVILLE, NC 28546.
Not very happy right now
I'm too old to reform, besides the path to rightousness is overrated.
The big button mod or the Vapefly Vippo, Golden Crown, or Lovebirds mods are enough to earn you a Pow Pow
Some of those mods are too ugly even for me. I may have to get another cheap SRX.
Here are some more... not $2 each though.
https://thevaporlair.com/shop/accessories/empty-pen-bottle/
I got my SQR today from FC - 2 days earlier I got one from FT . Both made by Ivogo, both with the same issues. The +base is shorting even without the center screw. I could fix it by adding a selfmade isolator. Tested and meassured it for a long time before I started to build it. I forgot to test the tank section on the FC one and juice....... .
Fixed that too and now it is vaping stable at 0,9 Ohm. But I don`t trust this naughty boy. The anodizing is not very good. I meassured inside the holes of the decks too and got 0,0 Ohm. Isolating the posts is not easy, because the gap is not enough for shrink tubing. Maybe teflon tape could fit.
Is it worth to work so much on an atty? Is it save after that? Should I better buy a third Heron, Rose, FeV or Fogger? Questions over questions.
SQR`s taste is far better than SQ1, but it is less save. I like the design, the taste and the AFC. And no leakage without modding. My setup runs perfect up to 25 watts.
Btw: a shorting 510 screw is possible too, but a second o-ring will solve this problem.
Fixed that too and now it is vaping stable at 0,9 Ohm. But I don`t trust this naughty boy. The anodizing is not very good. I meassured inside the holes of the decks too and got 0,0 Ohm. Isolating the posts is not easy, because the gap is not enough for shrink tubing. Maybe teflon tape could fit.
Is it worth to work so much on an atty? Is it save after that? Should I better buy a third Heron, Rose, FeV or Fogger? Questions over questions.
SQR`s taste is far better than SQ1, but it is less save. I like the design, the taste and the AFC. And no leakage without modding. My setup runs perfect up to 25 watts.
Btw: a shorting 510 screw is possible too, but a second o-ring will solve this problem.
Welcome to SqR Ivogo clone hell. Mine is finally running 100%. I replaced the 510 pin with a M3x16mm screw. Used an Aspire BVC insulator rather than o-rings. Double o-ringing the supplied 510 may or may not work... it didn't for me, at least not consistently. It would still jump resistance if I looked at it the wrong way.
Here's how I fixed mine:
Okay... here's the result.
As you can see, the head on the machine screw is much larger than then head on the 510 pin which I actually think is a good thing - more contact surface for the connection. It's only a hair longer so I'm not sure it's actually threading into the base much farther than the factory pin. I used an insulator from an old BVC head I had in my desk drawer. Granted, it's only been a few minutes but it works and firing about two dozen times resulted in a rock solid .8ohm. Seems to hit harder as well but that may be my imagination. Dunno... vapes like a wild beast now.
I couldn't use the SqR on my IPV2 (fixed 510) with the supplied pin. Works like a champ with the machine screw. There is some gap but I'm not a stickler for that kind of thing. I could probably reduce the gap if I torqued the machine screw into the atty a bit more but I don't want to push the insulator into the connector.
Only time will tell if I've excorsized the demons. I won't be convinced until it runs without issue for at least a week. But, at the risk of jinxing myself, I feel pretty good about it.
Pics:
Thanks @inswva
The 510 screw was not my problem. The positive base was shorting the the base - even with no screw inside. So far the isolator between positive base and negative base stopped the shorting and I have a constant reading of 0,9 Ohm. I hope that the deck does not short. For the next weeks I will only use it on regulated mods. Don`t want to get too hot fingers.
The 510 screw was not my problem. The positive base was shorting the the base - even with no screw inside. So far the isolator between positive base and negative base stopped the shorting and I have a constant reading of 0,9 Ohm. I hope that the deck does not short. For the next weeks I will only use it on regulated mods. Don`t want to get too hot fingers.
No I mean the newly restyled 100W .. only seen small pics of it but I did hit up my boo Samantha at Sigelei and she said she will send me one, but let's see. Well known manufacturers feel less compelled to send out samples for review if their pre-orders take off before its finished production.
I just want to review it and take pictures of it
Whoosh, from out of nowhere
I'm looking for these juice bottles, in case any of you happens to come across one:
OK,back to your big boxes...
Actually I do however, I cannot post the link here because its belongs to a private group
... I know I know Over a week of waiting for my shipment from the USA warehouse to Toronto... I figured my order was just stuck at customs... but then I receive this tracking message.
2014-11-06 11:46
JACKSONVILLE, NC 28546, Delivered, Your item was delivered at 11:46 am on November 6, 2014 in JACKSONVILLE, NC 28546.
Not very happy right now
Yikes .. I hope that you were given the wrong tracking number.
- Status
Similar threads
- Locked
