Frustating with my druga

[Taro]

I just given druga rda v1 authentic.i tried to build it used clapton,fused clapton,alien,and simple wire with 2.5 & 3 mm id.but i got no flavor.my drop clone can beat it easyly.its frustating me.somebody please help me.what is the best build for my druga?

 

[rob33]

Welcome to the forum. First off for flavor air flow is king!!! Too much or too little, you play with that. Second coil placement start with coil centered to air holes, then move them up or down. Adjust your power if you can some atties just like more or less power than you normally use. Somebody may chime in who has that atty and give a better tip than I.

 

[Mordacai]

Hello @Taro, I've always noted that side airflow is washed out for flavour somewhat when you compare it against bottom airflow.

But I'd say that if you imagine a line halfway up the airflow and a line a 1/3 the way up from the bottom of a coil, if you align them you may get some improvement. And get it as close as possible without shorting on the top cap.

 

[Taro]

Welcome to the forum. First off for flavor air flow is king!!! Too much or too little, you play with that. Second coil placement start with coil centered to air holes, then move them up or down. Adjust your power if you can some atties just like more or less power than you normally use. Somebody may chime in who has that atty and give a better tip than I.

Welcome to the forum. First off for flavor air flow is king!!! Too much or too little, you play with that. Second coil placement start with coil centered to air holes, then move them up or down. Adjust your power if you can some atties just like more or less power than you normally use. Somebody may chime in who has that atty and give a better tip than I.

I nearly fully closed the air hole.still got no flavour.ill try to adjust the coil.tx u

 

[rob33]

I understand your pain, I'm a flavor junkie. I use an Hadaly, which is a great flavor atty, if I try another atty that is not so good every build taste mute. You can try spaced wraps, closing off one side of air flow. Play with your build go higher or lower in Ω.

My go to build is a fused clapton SS 28x2 ga 2.5mm 5 or 6 wraps coming out between .5 and .7

 

[Mordacai]

If you're thinking about expanding the collection, have a look at Cthulhu Mods Mjölnir rda.

Now that's what I call flavour.

 

[Skeebo]

I just given druga rda v1 authentic.i tried to build it used clapton,fused clapton,alien,and simple wire with 2.5 & 3 mm id.but i got no flavor.my drop clone can beat it easyly.its frustating me.somebody please help me.what is the best build for my druga?

As the others have stated try having the coil height so the air flow hits the center of the coil. If that doesn't work then try raising the coil height slightly in increments to see if the flavor improves. Distance from the airflow is important as well. Adjust airflow and wattage as well... If you find the flavor improves enough to where it's satisfying then you know going forward that's how you have to do all your builds in it.

I was about to get the V2 myself, but when I looked at the design it reminded me a lot of some other RDAs I already have. Once you have one designed the same way you have basically had them all IMO. There may be slight variations in design and even a domed top cap could make a difference, but I find most Goon style airflow RDAs to be mediocre in flavor.

 

[Taro]

I understand your pain, I'm a flavor junkie. I use an Hadaly, which is a great flavor atty, if I try another atty that is not so good every build taste mute. You can try spaced wraps, closing off one side of air flow. Play with your build go higher or lower in Ω.

My go to build is a fused clapton SS 28x2 ga 2.5mm 5 or 6 wraps coming out between .5 and .7

Yeah..my friend have hadaly too.its awesome flavour for single coil.its beat my dual coil druga easyly.