all,
nice wee device but switching to SS316L does nothing. won't even fire. tried two RDAs. any suggestions?
nice wee device but switching to SS316L does nothing. won't even fire. tried two RDAs. any suggestions?
fuchai squonk...no SS...
- Thread starter lupinehorror
- Start date
- th_trl_thread_readers 0
- Status
Are you getting a ‘no atomizer found’ error or is it just not firing? If the latter, did you read and lock the resistance of the atty by pushing both the up and down buttons when a cold atty is attached?
how u find fuchai TC mode ? my keep jumping around ..... not sure is my SS material or ...
I don't know. Did you lock in the (cold) resistance of your coil when you entered TC mode? The TC wires resistances DO change with heat, and that is how TC actually keeps track of your coil, is how I understand it. So if you don't lock in your cold resistance you will probably get widely fluctuating results in TC mode, as you are working with a "moving target" as it were.
I don't know how to do that with the Fuchai, I don't own that setup, but a youtube review should show you how it functions, if your user manual isn't clear. Most likely, someone with that setup will be along to tell you how to do it specifically.
Anna
I don't know how to do that with the Fuchai, I don't own that setup, but a youtube review should show you how it functions, if your user manual isn't clear. Most likely, someone with that setup will be along to tell you how to do it specifically.
Anna
I do lock it .... just after few pull, my device can't read my ohm again, i need to lock it again to make it work .... so i need to know is my build or
That, I couldn't tell you. Do you have another TC mod to test it on? Or even see how it vapes in wattage mode, I guess, to see if it's the build or the TC function on the mod. Sorry to not be more help, I just have no idea, honestly.
Did you try putting it back on the ohm's reader and test fire it a bit? Jumping resistance on an ohm's reader would tell you if it's the build. A leg could have come loose from the deck or something.
IDK, because it could also be an electrical fault, if you don't have an ohm's reader you may need to physically check the build and see if anything is lose, or if you haven't quite snipped enough of the coil leg off or whatever.
Good luck, hopefully someone with that mod will be able to tell you any "special things to know about TC with it" or something.
I'd probably start with the build, since you aren't running into much luck with figuring out if you are doing TC incorrectly somehow or if it's even the mod itself, and an electrical fault.
Good luck,
Anna
Did you try putting it back on the ohm's reader and test fire it a bit? Jumping resistance on an ohm's reader would tell you if it's the build. A leg could have come loose from the deck or something.
IDK, because it could also be an electrical fault, if you don't have an ohm's reader you may need to physically check the build and see if anything is lose, or if you haven't quite snipped enough of the coil leg off or whatever.
Good luck, hopefully someone with that mod will be able to tell you any "special things to know about TC with it" or something.
I'd probably start with the build, since you aren't running into much luck with figuring out if you are doing TC incorrectly somehow or if it's even the mod itself, and an electrical fault.
Good luck,
Anna
TC is stable on mine. using a dead rabbit with two 0.5ohm spaced 316L coils. as anna said...check everything is screwed down tight
Can't say what is going on with Your Fuchai. But the Fuchai I got was Wacked right out of the Box.
It Wouldn't read the Ohms Consistently on any RDA (or RTA) I tried. So VW Mode was Unreliable. And TC Mode was a Complete Train Wreck.
I Loved the Size/Shape/Feel of the Fuchai. Unfortunately, the one I got just Didn't Work all that well.
BTW - Something I noticed about the Fuchai that I had.
With a Freshly Charged Battery, things seemed to work Pretty Well. And I didn't see very Many Problems. But as the Battery Level fell, it seemed that the Funkiness would become Greater and Great.
And this was with the Mod set to 25 ~ 40 Watts. And for Any 18650 Battery or the iJoy 21700 Battery I bought to go with the Fuchai.
Not sure if this Helps anyone. But maybe something to Watch if someone's Fuchai is acting Strange.
i having few problem with fuchai squonk too.
1. TC issue, it doesn't seem like able to lock resistance nicely, some time it work perfect but some time not on my SS.
2. Battery hunger, i find this device need a lot juice than my other mod (vape at 30-37w, temp below 400F), i plan to buy some sanyo 20700a and samsung 48G to try it out.
3. I do accidentally open that batt door few times.
i love this mod size but dislike bottle size.
- Status
Similar threads
