From the looks of the 510 pin this doesn't seem hybrid safe, can anyone comment on that? Was planning on running this on a hybrid series box if possible. Also vapordna is offering a bottle of KeyJuice (30ml) with every purchase while supplies last. Not advertising them but a 30ml bottle of premium juice is to good to not pass on in case people are on the fence or were waiting to order one.
Geek Vape Avocado 24 RDTA
- Thread starter Roadtrip635
- Start date
- th_trl_thread_readers 0
-
- Tags
- geekvape avocado 24 rba rda
- Status
The stainless steel one I ordered Saturday from Subtank Supply is out for delivery! Can't wait to get home today.
I ordered mine (Black) on Tuesday from OriginVape.com It will be in MN by Saturday. Been excited for this one for a while.
Just got a black and stainless in from the STS preorder, and have been holding on to some homemade claptons that have been waiting for a good home... hoping these are it!
The Guacamole has landed along with a Sig213. I'm going to slap some dualies on her and take it for a spin. Let you know how she rides [emoji12]
Cleaned it all up. All 14 pieces to it LOL.
Cleaned it all up. All 14 pieces to it LOL.
Last edited:
Yeah baby...
Gonna put a couple of these bad ....'s in it....
Sent from my iPhone using Tapatalk
Gonna put a couple of these bad ....'s in it....
Sent from my iPhone using Tapatalk
I put in dual, 3mmID, 8/7s, 317L that came in at .21ohms.
Stuffing the Rayon into the channels is a PITA. With a 3mmID I stuffed fatty wicks through so it was tedious to get all the wick into the chamber. I used a fine flat head screwdriver and just took my time. After I got them stuffed in I pulled up on the wicks and stuffed the coil ends as best I could to get a good shoulder on each end.
I used a syringe to fill. A fine dropper would work too. A fatty dropper will not work.
It took exactly 3mls. After the wicks absorbed I shot another 1+mls in there and topped it off.
I put it on a new mod. A SIG 213. I need to tinker with the mod. The SS setting at 315 degrees was not generating enough vapor so I need to adjust my TCR to correspond with my wire.
I went to power mode, started at 25 and ramped up to 50 watts now.
Flavor is really good and vapor is thick. The inside of the top cap is not conical so wasn't sure how the flavor would be. There is also a little bit of a distance between the top of the coil and the topper.
It's designed to mount the coils semi low to the deck to line up with the middle of the airholes.
I can tell it's going to eat juice with this setup. The 3mm coils fit in no problem. It can take big fatty claptons or aliens or whatever you want to put in there.
Here are some pics and I will update as I devour this tank[emoji6]
Here's a pic of one of my favorite cacti[emoji7]
Stuffing the Rayon into the channels is a PITA. With a 3mmID I stuffed fatty wicks through so it was tedious to get all the wick into the chamber. I used a fine flat head screwdriver and just took my time. After I got them stuffed in I pulled up on the wicks and stuffed the coil ends as best I could to get a good shoulder on each end.
I used a syringe to fill. A fine dropper would work too. A fatty dropper will not work.
It took exactly 3mls. After the wicks absorbed I shot another 1+mls in there and topped it off.
I put it on a new mod. A SIG 213. I need to tinker with the mod. The SS setting at 315 degrees was not generating enough vapor so I need to adjust my TCR to correspond with my wire.
I went to power mode, started at 25 and ramped up to 50 watts now.
Flavor is really good and vapor is thick. The inside of the top cap is not conical so wasn't sure how the flavor would be. There is also a little bit of a distance between the top of the coil and the topper.
It's designed to mount the coils semi low to the deck to line up with the middle of the airholes.
I can tell it's going to eat juice with this setup. The 3mm coils fit in no problem. It can take big fatty claptons or aliens or whatever you want to put in there.
Here are some pics and I will update as I devour this tank[emoji6]
Here's a pic of one of my favorite cacti[emoji7]
It's not as easy to wick the 24 as it is with the smaller one, I can see me going down to a 2.5 mm ID to make a little easier.
The fill holes are smaller and my dropper didn't fit, unicorn bottle tip fit fine.
Little big on my SX ML, probably going to be perfect on my SX Q if it ever arrives.
Same performance though, same flavor.
Didn't like the tiger coils in it, going to put SS 316L on it just like the other....
Sent from my iPhone using Tapatalk
The fill holes are smaller and my dropper didn't fit, unicorn bottle tip fit fine.
Little big on my SX ML, probably going to be perfect on my SX Q if it ever arrives.
Same performance though, same flavor.
Didn't like the tiger coils in it, going to put SS 316L on it just like the other....
Sent from my iPhone using Tapatalk
nice combination with the sig213. I think i'm going to strictly do single coil 2.5mm iad with this thing.
I've had a SIG 150 that is beaten up to all heck and has never failed so I pulled the trigger. I'm loving this baby. I did a 2mls refill already. This Avocado makes Guacamole out of juice DAYUM[emoji7]
This deck is BEGGING for quad verticals. I'm going to do quads with 26g....or 28g.
The 317L I am slamming now is really really flavorful.
I am getting no hissing or spitting at all. Very smooth pulls. Just like RIP said[emoji38][emoji38][emoji38]
The 317L I am slamming now is really really flavorful.
I am getting no hissing or spitting at all. Very smooth pulls. Just like RIP said[emoji38][emoji38][emoji38]
Quad verts you say?
One over each hole...hmmm
Interesting. I like it!
Sent from my iPhone using Tapatalk
Yea bro, quad verts....same coil ID as the deck holes.
It's nice to be able to turn the atty upside down to saturate the wicks.
If the wicks don't fill the deck holes it's going to flood.
Just a thought. With the quad verts, one of the leads for each coil will be longer so going to have to suss that out. It's doable, just one of thr leads wil be longer.
- Status
Similar threads
