Geekvape Griffin RTA!

[KayP]

Did I read that right. 35ish mil a day?


Sent from my iPhone using Tapatalk

You read it wrong. It was @smacksy who has vaped 250 mls of juice in his/her Griffin rta over a week.

@smacksy Did you make a mistake or have you really vaped that much in a week?

 

[KayP]

Mine is in my hand. No need for holders.

tapatyped

I'd like to say that's silly and dangerous, but I'm not here to preach. And obviously you have an automatic transmission vehicle..

 

[Bakseated1]

You read it wrong. It was @smacksy who has vaped 250 mls of juice in his/her Griffin RTA over a week.

@smacksy Did you make a mistake or have you really vaped that much in a week?

Yeah I quoted the wrong post. Probably the shock of someone saying 250 mil in a week causing me to lose track of what I was doing.


Sent from my iPhone using Tapatalk

 

[smacksy]

You read it wrong. It was @smacksy who has vaped 250 mls of juice in his/her Griffin RTA over a week.

@smacksy Did you make a mistake or have you really vaped that much in a week?

Oops, my bad! Meant to say over 150ml last week on two Griffins on two separate mods.. different flavors helps me avoid flavor burnout vaping the same flavor all day long..

Sent from my XT1080 using Tapatalk

 

[Bakseated1]

Oops, my bad! Meant to say over 150ml last week on two Griffins on two separate mods.. different flavors helps me avoid flavor burnout vaping the same flavor all day long..

Sent from my XT1080 using Tapatalk

Wow. Still over 20 mil a day. Do you DIY or order your juice by the gallon?


Sent from my iPhone using Tapatalk

 

[KayP]

Oops, my bad! Meant to say over 150ml last week on two Griffins on two separate mods.. different flavors helps me avoid flavor burnout vaping the same flavor all day long..

Sent from my XT1080 using Tapatalk

That still works out at 21 mls per day, not that I'm judging..

 

[roxynoodle]

I've never used my wick ring because it won't stay put. Everytime I've pulled the deck, it got stuck in the chimney.

 

[smacksy]

That still works out at 21 mls per day, not that I'm judging..

That's about right..I can almost watch the juice level drop with every cloud blowin lung hit I take on my Griffin(s).. Especially with the .25 ohm Nichrome build at 75-80w..those nice huge clouds use alot of thick VG juice..but I don't care, its fun and its keeping me tobacco free..lol

Sent from my XT1080 using Tapatalk

 

[Sun Valley]

It is amazing!

For my two Griffins on the left I had to drop my nic to 2.5mgs..3 deep lung hits and I'm good for about 1/2 hr, [emoji106]

Sent from my XT1080 using Tapatalk

Yep, I just made some 5mg, I'm gonna take it down to 3 next time.

Sent from my Geek Vape Griffin using Tapatalk

 

[danielpm]

Guys, I've been loving my Griffin from the past weeks, but I have to say that the juice consumption is very high. Today I was thinking if isn't possible to block the juice canals and the airflow hole in one side (just like the Griffin 25, but with cotton ), and run it in single coil. It would work?

 

[smacksy]

Guys, I've been loving my Griffin from the past weeks, but I have to say that the juice consumption is very high. Today I was thinking if isn't possible to block the juice canals and the airflow hole in one side (just like the Griffin 25, but with cotton ), and run it in single coil. It would work?

Maybe the Griffin is too much of a tank for you...I like the superb flavor and thick fluffy white clouds that does indeed use a little more juice, but that's OK with me..just sayin

Sent from my XT1080 using Tapatalk

 

[KayP]

Guys, I've been loving my Griffin from the past weeks, but I have to say that the juice consumption is very high. Today I was thinking if isn't possible to block the juice canals and the airflow hole in one side (just like the Griffin 25, but with cotton ), and run it in single coil. It would work?

It could, anythings possible. I don't think I'm using as much juice in my single coil build as with dual coils; however, all 4 juices holes are still feeding the one coil. Its not really conserving juice. But you may be able cut out bits delrin to plug up the unwanted juice holes and air flow hole. Be careful though and make sure the delrin doesn't touch the posts.

Sent from my SM-G900I using Tapatalk

 

[KayP]

Maybe the Griffin is too much of a tank for you...I like the superb flavor and thick fluffy white clouds that does indeed use a little more juice, but that's OK with me..just sayin

Sent from my XT1080 using Tapatalk

Oi! Be nice [emoji12]

Sent from my SM-G900I using Tapatalk

 

[smacksy]

Oi! Be nice [emoji12]

Sent from my SM-G900I using Tapatalk

Heck, I thought I was! [emoji317]

Sent from my XT1080 using Tapatalk

 

[danielpm]

Maybe the Griffin is too much of a tank for you...I like the superb flavor and thick fluffy white clouds that does indeed use a little more juice, but that's OK with me..just sayin

I'm ok with the Griffin. I like it, a lot, but I am curious if it's possible to do. Lower juice consumption is always good .

It could, anythings possible. I don't think I'm using as much juice in my single coil build as with dual coils; however, all 4 juices holes are still feeding the one coil. Its not really conserving juice. But you may be able cut out bits delrin to plug up the unwanted juice holes and air flow hole. Be careful though and make sure the delrin doesn't touch the posts.

Sent from my SM-G900I using Tapatalk

Hmm, I don't know if I can find delrin to use like that here in my area. I will try to use a lot of (compressed) cotton, and see if it works. I have to change the coil anyways, and it's always fun to try something new .

 

[KayP]

I'm ok with the Griffin. I like it, a lot, but I am curious if it's possible to do. Lower juice consumption is always good .


Hmm, I don't know if I can find delrin to use like that here in my area. I will try to use a lot of (compressed) cotton, and see if it works. I have to change the coil anyways, and it's always fun to try something new .

Be careful with trying to use cotton to plug the unwanted air flow hole- The juice holes you can get away with but with the air hole you run a danger of dislodging and inhaling it. You don't want that..

Sent from my SM-G900I using Tapatalk

 

[smacksy]

I'm ok with the Griffin. I like it, a lot, but I am curious if it's possible to do. Lower juice consumption is always good .


Hmm, I don't know if I can find delrin to use like that here in my area. I will try to use a lot of (compressed) cotton, and see if it works. I have to change the coil anyways, and it's always fun to try something new .

l heard the newer 25mm Griffin will come with this ceramic block for single coil builds..[emoji106]

Sent from my XT1080 using Tapatalk

 

[kushpancake]

Hehe, I love being able to securely position a mod in the car for easy access at stop lights and stop signs I like to place my mod into a cup holder and wedge in my wallet or phone (which has a leather cover on it) to keep the mod from moving about; however, I prefer using the cup holder next to the steering wheel for ease of access. Regrettably this cup holder location being slowly phased out in most cars

I understand that this was a serious departure from the topic. My apologies.

Why only at lights and stop signs? sometimes i blow clouds so thick i have to hold my head out the window to see!

 

[danielpm]

Be careful with trying to use cotton to plug the unwanted air flow hole- The juice holes you can get away with but with the air hole you run a danger of dislodging and inhaling it. You don't want that..

Sent from my SM-G900I using Tapatalk

Very good point, Sir! Thanks! I will try a single coil between the two posts then!

 

[KayP]

Why only at lights and stop signs? sometimes i blow clouds so thick i have to hold my head out the window to see!

It's just my way of controlling myself otherwise I'd be vaping the entire time.

Next time roll your windows down to let some of the clouds out of the car, rather than your head.

Sent from my SM-G900I using Tapatalk